iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14482:2010

(Main)

Postal services - Trays for international letter mail - Test methods and performance requirements

Postal services - Trays for international letter mail - Test methods and performance requirements

This European Standard specifies the performance requirements and testing methods for standard letter mail trays, as specified in the classification below. The trays should be used to facilitate the exchange of international mail. The technical specification of the trays should be such that the performance requirements specified herein are met and tests specified herein successfully completed. The technical specifications of trays as such however, are beyond the scope of this standard.
This standard covers a one-size universal letter mail tray suitable for carrying C4, C5 and C6 mail:
Table 1 - Letters (maximum accepted sizes)
   Height   Width
C4   353 mm   250 mm
C5   173 mm   250 mm
C6   120 mm   250 mm
The trays are suitable for containing C4 mail stacked in a horizontal plane and for stacking C5 and C6 mail vertically.

Postalische Dienstleistungen - Behälter für internationale Briefsendungen - Testmethoden und Anforderungen

Diese Europäische Norm legt die Leistungsanforderungen und Prüfverfahren für normgerechte Brief-sendungsbehälter fest, wie in der Klassifizierung unten beschrieben. Die Behälter sollten zur Erleichterung des Austauschs grenzüber¬schreitender Sendungen verwendet werden. Die technische Beschreibung der Behälter sollte so gehalten sein, dass die darin beschriebenen Leistungsanforderungen eingehalten und Prüfungen erfolgreich durch¬geführt werden können. Die technische Beschreibung der Behälter selbst geht jedoch über den Anwendungsbereich dieser Norm hinaus.
Diese Europäische Norm umfasst einen universellen Briefsendungsbehälter einer Größe zur Aufnahme von Sendungen der Größe C4, C5 und C6:
Tabelle 1 — Briefe (maximal zulässige Größen)
   Höhe   Breite
C4   353 mm
250 mm
C5   173 mm
250 mm
C6   120 mm
250 mm
Die Behälter eignen sich für horizontal gestapelte C4 Umschläge sowie für vertikal gestapelte C5  und C6 Umschläge.

Services postaux - Caissettes pour le courrier international - Méthodes d'essais et exigences de performances

La présente Norme européenne spécifie les exigences de performances et les méthodes d'essais relatives aux caissettes pour lettres postales normalisées, telles que spécifiées dans la classification ci-dessous. Il convient d'utiliser les caissettes pour faciliter l'échange du courrier international. Il convient que les spécifications techniques des caissettes soient telles que les exigences de performances spécifiées dans la présente norme soient satisfaites et que les essais spécifiés dans la présente norme soient réalisés avec succès. Toutefois, les spécifications techniques des caissettes, en elles-mêmes, ne relèvent pas du domaine d'application de la présente norme.
La présente norme couvre une caissette universelle de taille unique pour lettres postales adaptée au transport du courrier C4, C5 et C6 :
Tableau 1 — Lettres (dimensions maximales acceptées)
   Hauteur   Largeur
C4   353 mm   250 mm
C5   173 mm   250 mm
C6   120 mm   250 mm
Les caissettes sont adéquates pour contenir le courrier C4 empilé dans un plan horizontal et pour empiler verticalement le courrier C5 et C6.

Poštne storitve - Pismarnice za mednarodne pisemske pošiljke - Preskusne metode in zahtevane lastnosti

Ta evropski standard določa zahtevane lastnosti in preskusne metode za standardne pismarnice za pisemske pošiljke, kot je določeno v spodnji klasifikaciji. Pismarnice naj bi se uporabljale za lažjo izmenjavo mednarodne pošte. Tehnične specifikacije pismarnic naj bi izpolnjevale zahtevane lastnosti ter omogočale uspešno izvedbo preskusov iz tega standarda. Same tehnične specifikacije pismarnic niso vključene v področje uporabe tega standarda.

General Information

Status
Published
Publication Date
26-Oct-2010
Withdrawal Date
29-Apr-2011
ICS
03.240 - Postal services
55.160 - Cases. Boxes. Crates
Technical Committee
CEN/TC 331 - Postal services
Drafting Committee
CEN/TC 331 - Postal services
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
11-Jun-2021
Ref Project
SIST EN 14482:2012 - Postal services - Trays for international letter mail - Test methods and performance requirements

Relations

Replaces
CEN/TS 14482:2003 - Postal services - Trays for international letter mail - Test methods and performance requirements
Effective Date
30-Oct-2010

Buy Standard

EN 14482:2012EN 14482:2012
PreviousNext
Standard
EN 14482:2012
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Poštne storitve - Pismarnice za mednarodne pisemske pošiljke - Preskusne metode in zahtevane lastnostiPostalische Dienstleistungen - Behälter für internationale Briefsendungen - Testmethoden und AnforderungenServices postaux - Caissettes pour le courrier international - Méthodes d'essais et exigences de performancesPostal services - Trays for international letter mail - Test methods and performance requirements55.160]DERMLCases. Boxes. Crates03.240Poštne storitvePostal servicesICS:Ta slovenski standard je istoveten z:EN 14482:2010SIST EN 14482:2012en,fr,de01-marec-2012SIST EN 14482:2012SLOVENSKI
STANDARDSIST-TS CEN/TS 14482:20051DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14482
October 2010 ICS 55.160 Supersedes CEN/TS 14482:2003English Version
Postal services - Trays for international letter mail - Test methods and performance requirements
Services postaux - Caissettes pour le courrier international - Méthodes d'essais et exigences de performances
Postalische Dienstleistungen - Behälter für internationale Briefsendungen - Testmethoden und Anforderungen This European Standard was approved by CEN on 26 September 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14482:2010: ESIST EN 14482:2012

Sample test report . 16Bibliography . 25 SIST EN 14482:2012

This standard covers a one-size universal letter mail tray suitable for carrying C4, C5 and C6 mail: Table 1 — Letters (maximum accepted sizes) Height Width C4 353 mm 250 mm C5 173 mm 250 mm C6 120 mm 250 mm
The trays are suitable for containing C4 mail stacked in a horizontal plane and for stacking C5 and C6 mail vertically. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1005-2, Safety of machinery — Human physical performance — Part 2: Manual handling of machinery and component parts of machinery EN 22206, Packaging — Complete, filled transport packages — Identification of parts when testing (ISO 2206:1987) EN 22248, Packaging — Complete, filled transport packages — Vertical impact test by dropping (ISO 2248:1985) EN 60695-11-20, Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods
(IEC 60695-11-20:1999) EN ISO 2233, Packaging — Complete, filled transport packages and unit loads — Conditioning for testing (ISO 2233:2000) EN ISO 2247, Packaging — Complete, filled transport packages and unit loads — Vibration tests at fixed low frequency (ISO 2247:2000) EN ISO 2875, Packaging — Complete, filled transport packages and unit loads — Water-spray test (ISO 2875:2000) EN ISO 4180, Packaging — Complete, filled transport packages — General rules for the compilation of performance test schedules (ISO 4180:2009) EN ISO 12048, Packaging — Complete, filled transport packages — Compression and stacking tests using a compression tester (ISO 12048:1994) SIST EN 14482:2012

ability of a tray and closure to withstand conditions to which it is subjected (when tested) 3.3 friction capacity to prevent sliding on an inclined low friction conveying surface specified as the coefficient of friction 3.4 letter mail
category of postal items classified according to its physical characteristics such as weight and dimensions 3.5 nestability
ability of trays and closures to fit together one partially inside the other (measured as the ratio of the number of trays and closures which can be nested in a stack for one tray (tray and closure) height) 3.6 recyclability
ability to recover the material of a discarded tray (measured as the content of recycled material in a tray) 3.7 stackability
ability to be stacked and fully palletisable when filled with letter mail 3.8 temperature resistance
ability to maintain shape (when conditioned) within a pre-defined temperature range 3.9 tray primary container with closure for the carriage of letter mail 3.10 weather resistance ability to remain serviceable (when conditioned) under specific weather conditions 4 Requirements 4.1 General The mail tray shall meet all the requirements stated in Clause 4. 4.2 Tray size requirements Minimum internal tray dimensions shall accommodate mail of the following sizes with ease of handling: SIST EN 14482:2012

4.3 Tray performance requirement 4.3.1 Compatibility Trays and closures shall fit well onto each other, nest easily into each other and separate well from each other without the use of undue force. 4.3.2 Compression The trays shall meet a minimum compression strength requirement of 180 kg at a deflection of less than
10 mm before failure.
NOTE This represents a five high stack of trays each weighing 10 kg and a safety factor of 4,5, as specified in
EN ISO 12048. 4.3.3 Durability Trays shall withstand drop, vibration and crushing simulations as per the following: Each tray sh
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 2588:2024(Main)
Aerospace series - Bearing, spherical plain in corrosion resisting steel with assembly slots - Dimensions and loads
kSIST FprEN 2588:2024

This document specifies the characteristics of spherical plain bearings in corrosion resisting steel, with assembly slots, metric series, with or without lubrication holes and groove, intended for use in fixed or moving parts of aircraft structure and control mechanisms, within the temperature range from −54 °C to 150 °C.
It also applies to the following temperature ranges when lubricated with the following greases (see EN 2337):
-   ester type very high pressure grease (code letter A), operating range from −73 °C to 121 °C;
-   synthetic hydrocarbon type very high pressure grease general purpose (code letter B), operating range from −54 °C to 177 °C.
Their field of application when lubricated with grease code letter A is limited to 121 °C.

  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 18075:2024(Main)
Resilient, textile, laminate and modular mechanical locked floor coverings - Circular economy and sustainability - Recommendations/guidelines for design
kSIST-TS FprCEN/TS 18075:2024

The aim of this document is to provide general recommendations and guidelines on how to design a product to optimize its reuse and recyclability at the end of its lifetime as well as to take into account sustainable sourcing of materials for all floor covering product groups covered by CEN/TC 134. The overall target is to avoid waste and pollution and to achieve a product fit for the circular economy.
In a linear economy, the focus of product design is on developing new products without considering the recycling or reuse of the raw materials used.
This document provides guidance for processes allowing for (raw) materials used to be returned to the economic cycle based on circular design principles. The focus is on open systems that allow for economically interesting alternatives and are not limited to the principle of closed cycles (product to product).
Specific attention is given to renewable materials, where applicable.
The document is structured along the life cycle of the products, starting with the production phase.
Excluded is packaging, which is not considered part of the product end-of-life stage.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18562-3:2024(Main)
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 3: Tests for emissions of volatile organic substances (ISO 18562-3:2024)
kSIST FprEN ISO 18562-3:2024

This document specifies tests for the emissions of volatile organic substances from the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a patient in all environments. The tests of this document are intended to quantify emissions of volatile organic substances that are added to the respirable gas stream by the materials of the gas pathway. This document establishes acceptance criteria for these tests.
NOTE            Gaseous emission of volatile organic substances includes emissions of volatile organic compounds, semi-volatile organic compounds and very volatile organic compounds.
This document addresses potential contamination of the gas stream arising from the gas pathways of medical devices or accessories, which is then conducted to the patient.
This document applies over the expected lifetime of the medical device in normal use and takes into account the effects of any intended processing.
This document does not address biological evaluation of the surfaces of gas pathways that are in direct contact with the patient. The requirements for direct contact surfaces are found in the ISO 10993 series.
Medical devices, parts or accessories containing gas pathways that are addressed by this document include, but are not limited to, ventilators, anaesthesia workstations (including gas mixers), breathing systems, oxygen conserving devices, oxygen concentrators, nebulizers, low-pressure hose assemblies, humidifiers, heat and moisture exchangers, respiratory gas monitors, respiration monitors, masks, medical respiratory personal protective equipment, mouth pieces, resuscitators, breathing tubes, breathing systems filters, Y-pieces and any breathing accessories intended to be used with such devices. The enclosed chamber of an incubator, including the mattress, and the inner surface of an oxygen hood are considered to be gas pathways and are also addressed by this document.
This document does not address contamination already present in the gas supplied from the gas sources while medical devices are in normal use.
EXAMPLE            Contamination arriving at the medical device from gas sources such as medical gas pipeline systems (including the non-return valves in the pipeline outlets), outlets of pressure regulators connected or integral to a medical gas cylinder or room air taken into the medical device is not addressed by ISO 18562 series.
This document is intended to be read in conjunction with ISO 18562-1.

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 899-2:2024(Main)
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading (ISO 899-2:2024)
kSIST FprEN ISO 899-2:2024

This document specifies a method for determining the flexural creep of plastics in the form of standard test specimens under specified conditions such as those of pre-treatment, temperature and humidity. It is only applicable to a simple freely supported beam loaded at mid-span (three-point-loading test).
 The method is suitable for use with rigid and semi-rigid non-reinforced, filled and fibre-reinforced plastics materials (see ISO 472 for definitions) test specimens moulded directly or machined from sheets or moulded articles.
NOTE            The method can be unsuitable for certain fibre-reinforced materials due to differences in fibre orientation
The method is intended to provide data for engineering-design, quality control, research and development purposes.
The method might not be applicable for determining the flexural creep of rigid cellular plastics (attention is drawn in this respect to ISO 1209-1 and ISO 1209-2).

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18562-2:2024(Main)
Biocompatibility evaluation of breathing gas pathways in healthcare applications - Part 2: Tests for emissions of particulate matter (ISO 18562-2:2024)
kSIST FprEN ISO 18562-2:2024

This document specifies tests for the emissions of particulate matter from the gas pathways of a medical device, its parts or accessories, which are intended to provide respiratory care or supply substances via the respiratory tract to a patient in all environments. The tests of this document are intended to quantify particles from 0,25 µm diameter to 10 µm diameter that are emitted by the medical device, its parts or accessories into the respirable gas stream. This document establishes acceptance criteria for these tests.
This document does not address nanoparticles. Insufficient data exist to establish exposure limits for particles less than 0,25 µm diameter.
This document does not address particles larger than 10 µm diameter. These particles are deposited in the nasal cavity. Additional information can be needed for medical devices or accessories that bypass the nose. This is outside the scope of this document but can be required by some authorities having jurisdiction.
This document therefore adopts the same approach as the US Environmental Protection Agency (EPA) in setting limits based solely on particle size and not their chemistry.
This document addresses potential contamination of the gas stream arising from the gas pathways, which is then conducted to the patient.
This document applies over the expected lifetime of the medical device in normal use and takes into account the effects of any intended processing.
This document does not address biological evaluation of the particles that are deliberately released by a nebulizer (i.e. the therapeutic agent).
This document does not address biological evaluation of the surfaces of gas pathways that have direct contact with the patient. The requirements for direct contact surfaces are found in the ISO 10993 series.
Medical devices, parts or accessories, containing gas pathways that are addressed by this document, include, but are not limited to, ventilators, anaesthesia workstations (including gas mixers), breathing systems, oxygen conserving devices, oxygen concentrators, nebulizers, low-pressure hose assemblies, humidifiers, heat and moisture exchangers, respiratory gas monitors, respiration monitors, masks, medical respiratory personal protective equipment, mouth pieces, resuscitators, breathing tubes, breathing systems filters, Y-pieces, and any breathing accessories intended to be used with such devices. The enclosed chamber of an incubator, including the mattress, and the inner surface of an oxygen hood are considered to be gas pathways and are also addressed by this document.
This document does not address contamination already present in the gas supplied from the gas sources while medical devices are in normal use.
EXAMPLE            Contamination arriving at the medical device from gas sources such as medical gas pipeline systems (including the non-return valves in the pipeline outlets), outlets of pressure regulators connected or integral to a medical gas cylinder or room air taken into the medical device is not addressed by ISO 18562 (all parts).

  • Draft
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13997:2024(Main)
Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:2024)
oSIST prEN ISO 13997:2024

This document specifies a tomodynamometer cut test method and related calculations, for use on materials and assemblies designed for protective clothing, including gloves. The test determines resistance to cutting by sharp edges, such as knives, sheet metal parts, swarf, glass, bladed tools and castings.
When this document is cited as a test method in a material or product requirement standard, that standard contains the necessary information to permit the application of this document to the particular product.
This test does not provide data on the resistance to penetration by pointed objects such as needles and thorns, or the point of sharp-edged blades. The test described in this document is not considered suitable for testing materials made from chain mail and metal plates. The text of this document does not include provisions for the safeguard of the operator.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17984-1:2024(Main)
Assistance dogs - Part 1: Vocabulary
SIST EN 17984-1:2024

This document specifies the terms and definitions that apply to:
—   different types of assistance dogs;
—   the beneficiary and client services;
—   health and disabilities;
—   assistance dog service providers;
—   assistance dog training staff and related professionals;
—   the socialization and training processes;
—   conformity assessment, identification and registration;
—   accessibility.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16709:2024(Main)
Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods
kSIST FprEN 16709:2024

This document specifies requirements and test methods for marketed and delivered high FAME (B20 and B30) diesel fuel for use in diesel engine vehicles designed or subsequently adapted to run on such fuel. High FAME diesel fuel is a mixture of up to 20 % (V/V) in total and up to 30 % (V/V) in total respectively fatty acid methyl esters (commonly known as FAME) complying with EN 14214 and automotive diesel fuel complying with EN 590.
For maintenance and control reasons high FAME (B20 and B30) diesel fuel is to be used in captive fleets that are intended to have an appropriate fuel management (see Clause 4).
NOTE 1   These products are allowed in Europe [4], but national legislation can set additional requirements or rules concerning, or even prohibiting, marketing or delivering of the product.
NOTE 2   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction and the volume fraction.
NOTE 3   In this document, A-deviations apply (see Annex A).

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 683-7:2024(Main)
Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels (ISO 683-7:2023)
oSIST prEN ISO 683-7:2024

This document specifies the technical delivery requirements for bright steel products in the drawn, peeled/turned or additional ground condition and they are intended for mechanical purposes, for example for machine parts. The bright steel products are subdivided into the following steel types:
a)       non-alloy general engineering steels;
b)       non-alloy free-cutting steels;
c)        non-alloy and alloy case-hardening steels;
d)       non-alloy and alloy steels for quenching and tempering.
Bright products of stainless steels are not part of this document, they are covered by ISO 16143-4.

  • Draft
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12594:2024(Main)
Bitumens and bituminous binders - Preparation of test samples
kSIST FprEN 12594:2023

This document specifies methods for preparing test samples of bitumens and bituminous binders in order to test their properties.
WARNING - The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day