EN 12373-10:1998
(Main)Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus
This part of this European Standard specifies a method of test for comparing the resistance to abrasion of anodic oxidation coatings on aluminium and its alloys with that of a standard specimen or, alternatively, a reference specimen, by the use of a jet of abrasive particles. The mean specific abrasion resistance of an anodic oxidation coating may be determined by the method described.
Aluminium und Aluminiumlegierungen - Anodisieren - Teil 10: Messung der mittleren spezifischen Abriebfestigkeit von anodisch erzeugten Oxidschichten durch Abriebprüfung mit einem Schleifmittelstrahl-Prüfgerät
Dieser Teil dieser Europäischen Norm legt ein Prüfverfahren fest zum Vergleich der Abriebfestigkeit von anodisch erzeugten Oxidschichten auf Aluminium und Aluminiumlegierungen mit der Abriebfestigkeit entweder einer Normprobe oder einer Referenzprobe durch Anwendung eines Schleifmittelstrahls. Dabei kann die mittlere spezifische Abriebfestigkeit von anodisch erzeugten Oxidschichten durch das beschriebene Verfahren bestimmt werden.
Aluminium et alliages d'aluminium - Anodisation - Partie 10: Détermination de la résistance spécifique moyenne des couches d'oxyde anodiques à l'abrasion par essai au jet abrasif
La présente partie de cette norme européenne spécifie une méthode d'essai permettant, par utilisation d'un jet de particules abrasives, de comparer la résistance à l'abrasion de couches d'oxydation anodiques formées sur l'aluminium ou ses alliages par rapport à celle d'une éprouvette normalisée ou d'une éprouvette de référence. Cette méthode fournit une mesure de la résistance spécifique moyenne à l'abrasion de la couche anodique par la méthode décrite.
Aluminij in aluminijeve zlitine - Anodna oksidacija - 10. del: Meritve srednje specifične obrabne obstojnosti anodnooksidiranih prevlek s peskalno napravo
General Information
- Status
- Withdrawn
- Publication Date
- 17-Nov-1998
- Withdrawal Date
- 31-Jan-2011
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 15 - Aluminium anodisation
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Feb-2011
- Completion Date
- 01-Feb-2011
Relations
- Effective Date
- 05-Feb-2011
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 12373-10:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus". This standard covers: This part of this European Standard specifies a method of test for comparing the resistance to abrasion of anodic oxidation coatings on aluminium and its alloys with that of a standard specimen or, alternatively, a reference specimen, by the use of a jet of abrasive particles. The mean specific abrasion resistance of an anodic oxidation coating may be determined by the method described.
This part of this European Standard specifies a method of test for comparing the resistance to abrasion of anodic oxidation coatings on aluminium and its alloys with that of a standard specimen or, alternatively, a reference specimen, by the use of a jet of abrasive particles. The mean specific abrasion resistance of an anodic oxidation coating may be determined by the method described.
EN 12373-10:1998 is classified under the following ICS (International Classification for Standards) categories: 25.220.20 - Surface treatment; 77.120.10 - Aluminium and aluminium alloys. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12373-10:1998 has the following relationships with other standards: It is inter standard links to EN ISO 8251:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12373-10:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Anodisieren - Teil 10: Messung der mittleren spezifischen Abriebfestigkeit von anodisch erzeugten Oxidschichten durch Abriebprüfung mit einem Schleifmittelstrahl-PrüfgerätAluminium et alliages d'aluminium - Anodisation - Partie 10: Détermination de la résistance spécifique moyenne des couches d'oxyde anodiques a l'abrasion par essai au jet abrasifAluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatus77.120.10Aluminij i
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...