EN 12044:2005+A1:2009
(Main)Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
1.1 This European Standard specifies safety requirements for the design and operation of the machines defined in 1.2.
It takes account of intended use, foreseeable misuse and component and system failure.
1.2 This European Standard applies for cutting and punching machines used in the manufacture of footwear, leather and imitation leather goods and other related components. This European Standard applies to the following cutting and punching machines:
- swing arm cutting presses with manual or powered swing arm;
- manual and automatic travelling head cutting presses with powered travelling head;
- manual and automatic beam cutting presses;
- punching and perforating presses;
- C-frame cutting presses.
1.3 This European Standard is not applicable to:
- mechanical presses;
- presses intended for working cold metal;
- fastening, riveting, stitching, stapling, bending or folding machines;
- guillotines, shears and similar machines;
- shoe and leather presses as described in EN 12203.
1.4 This European Standard deals with all significant hazards, hazardous situations and events relevant to the footwear, leather and imitation leather goods manufacturing machinery defined in 1.2, when it is used as intended and under the conditions foreseen by the manufacturer (see Clause 4) and is intended for operation in applications by trained persons.
1.5 This European Standard deals with material feeding and handling devices, when attached to the machine.
1.6 This European Standard is not applicable to machines which are manufactured before the date of publication of this European Standard by CEN.
Maschinen zur Herstellung von Schuhen, Leder- und Kunstlederwaren - Stanzmaschinen - Sicherheitsanforderungen
1.1 Diese Europäische Norm enthält Sicherheitsanforderungen für !die" Konstruktion und Betrieb der in 1.2 genannten Maschinen.
Sie berücksichtigt bestimmungsgemäße Verwendung, vorhersehbaren falschen Gebrauch sowie den Ausfall von Bauteilen und Systemen.
1.2 Diese Europäische Norm gilt für Stanzmaschinen, die bei der Herstellung von Schuhen, Leder- und Kunstlederwaren und anderen zugehörigen Teilen verwendet werden. Diese Europäische Norm gilt für die folgenden Stanzmaschinen:
Schwenkarmstanzen mit einem manuell oder kraftbetätigten Schwenkarm;
manuell betätigte und automatisch sich bewegende Karrenbalkenstanzen mit kraftbetätigtem Karren-balken;
manuelle und automatische Brückenstanzen;
Matrizen- und Perforierstanzen;
Tellerstanzen.
1.3 Diese Europäische Norm gilt nicht für:
mechanische Stanzen;
Stanzen der Metallverarbeitung;
Maschinen zum Befestigen, Nieten, Nähen, Klammern, Biegen oder Falten;
Schlagscheren, Scheren und ähnliche Maschinen;
Schuh- und Lederpressen wie in EN 12203 beschrieben.
1.4 Diese Europäische Norm behandelt alle signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse, die bei !in 1.2 genannten" Maschinen zur Herstellung von Schuhen, Leder- und Kunstlederwaren auftreten, wenn diese bestimmungsgemäß und unter vom Hersteller vorhersehbaren Bedingungen verwendet werden (siehe Abschnitt 4) und für den Betrieb in Anwendungen durch geschulte Personen bestimmt sind.
1.5 Diese Europäische Norm behandelt Materialzuführ- und -handhabungseinrichtungen, wenn sie im montierten Zustand Teil der Maschine sind.
1.6 Diese Europäische Norm gilt nicht für Maschinen, die vor dem Tag der Veröffentlichung dieser Europäischen Norm durch CEN hergestellt worden sind.
Machines de fabrication de chaussures et d'articles en cuir et en matériaux similaires - Machines de coupe et de poinçonnage - Prescriptions de sécurité
1.1 La présente Norme européenne spécifie les prescriptions de sécurité pour la conception et le fonctionnement
des machines définies en 1.2.
Elle tient compte de l’utilisation normale, du mauvais usage prévisible et des défaillances des composants et
du système.
1.2 La présente Norme européenne est applicable aux machines de coupe et de poinçonnage utilisées pour la
fabrication de chaussures et d’articles en cuir et en matériaux similaires et autres éléments associés. La présente
Norme européenne s’applique aux machines de coupe et de poinçonnage suivantes :
presses à découper à bras pivotant manuel ou motorisé ;
presses à découper à chariot mobile manuelles et automatiques avec chariot mobile motorisé ;
presses à découper à pont manuelles et automatiques ;
presses à poinçonner et à perforer ;
presses à découper à bâti en C.
1.3 La présente Norme européenne ne s’applique pas aux :
presses mécaniques ;
presses conçues pour le travail du métal à froid ;
machines à assembler, à riveter, à piquer, à brocher, à plier ou à cintrer ;
guillotines, cisailles et machines analogues ;
presses pour la fabrication de chaussures et articles en cuir, telles que décrites dans l’EN 12203.
1.4 La présente Norme européenne traite de tous les phénomènes dangereux significatifs, situations et
événements dangereux liés aux machines de fabrication !définies au paragraphe 1.2" de chaussures
et d’articles en cuir et en matériaux similaires, utilisées selon l’utilisation normale et dans les conditions prévues par
le fabricant (voir Article 4) et destinées à être actionnées par des personnes formées.
1.5 La présente Norme européenne traite des dispositifs d’alimentation et de manutention de matériau fixés
à la machine.
1.6 La présente Norme européenne n’est pas applicable aux machines fabriquées avant la date de publication
de la présente Norme européenne par le CEN.
Stroji za izdelavo obutve ter izdelkov iz usnja in njegovih imitacij - Rezalni in izsekovalni stroji - Varnostne zahteve
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stroji za izdelavo obutve ter izdelkov iz usnja in njegovih imitacij - Rezalni in izsekovalni stroji - Varnostne zahteveMaschinen zur Herstellung von Schuhen, Leder- und Kunstlederwaren - Stanzmaschinen - SicherheitsanforderungenMachines de fabrication de chaussures et d'articles en cuir et en matériaux similaires - Machines de coupe et de poinçonnage - Prescriptions de sécuritéFootwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements61.060ObuvalaFootwear59.140.40Stroji in oprema za proizvodnjo usnja in krznaMachines and equipment for leather and fur productionICS:Ta slovenski standard je istoveten z:EN 12044:2005+A1:2009SIST EN 12044:2005+A1:2009en,fr01-oktober-2009SIST EN 12044:2005+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12044:2005+A1
August 2009 ICS 59.140.40; 61.060 Supersedes EN 12044:2005English Version
Footwear, leather and imitation leather goods manufacturing machines - Cutting and punching machines - Safety requirements
Machines de fabrication de chaussures et d'articles en cuir et en matériaux similaires - Machines de coupe et de poinçonnage - Prescriptions de sécurité
Maschinen zur Herstellung von Schuhen, Leder- und Kunstlederwaren - Stanzmaschinen - Sicherheitsanforderungen This European Standard was approved by CEN on 17 June 2005 and includes Corrigendum 1 issued by CEN on 13 December 2006 and Amendment 1 approved by CEN on 16 July 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12044:2005+A1:2009: ESIST EN 12044:2005+A1:2009
Interlocking devices associated with guards . 51 Annex B (normative)
Hold-to-run control devices . 55 Annex C (normative)
Mechanical trip device with one position sensor . 56 Annex D (normative)
Well tried components and principles: category 1 of EN 954-1:1996 . 57 Annex E (normative)
Verification of one hand control up to a maximum stroke of 8 mm . 58 Annex F (normative)
Noise Test Code . 59 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC . 66 Bibliography . 68 SIST EN 12044:2005+A1:2009
1 Scope 1.1 This European Standard specifies safety requirements for !the" design and operation of the machines defined in 1.2. It takes account of intended use, foreseeable misuse !and" component and system failure. 1.2 This European Standard applies for cutting and punching machines used in the manufacture of footwear, leather and imitation leather goods and other related components. This European Standard applies to the following cutting and punching machines: swing arm cutting presses with manual or powered swing arm; manual and automatic travelling head cutting presses with powered travelling head; manual and automatic beam cutting presses; punching and perforating presses; C-frame cutting presses. 1.3 This European Standard is not applicable to:
mechanical presses; presses intended for working cold metal; fastening, riveting, stitching, stapling, bending or folding machines; guillotines, shears and similar machines; shoe and leather presses as described in EN 12203. 1.4 This European Standard deals with all significant hazards, hazardous situations and events relevant to the footwear, leather and imitation leather goods manufacturing machinery !defined in 1.2", when it is used as intended and under the conditions foreseen by the manufacturer (see Clause 4) and is intended for operation in applications by trained persons. 1.5 This European Standard deals with material feeding and handling devices, when attached to the machine. 1.6 This European Standard is not applicable to !deleted text" machines which are manufactured before the date of publication of this European Standard by CEN. SIST EN 12044:2005+A1:2009
2 Normative references The following referenced documents are indispensable for the application of this European Standard. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 294:1992, Safety of machinery – Safety distance to prevent danger zones being reached by the upper limbs !EN 349", Safety of machinery – Minimum gaps to avoid crushing of parts of the human body !deleted text" !EN 547-1", Safety of machinery – Human body measurements – Part 1: Principles for determining the dimensions required for openings for whole body access into machinery !EN 547-2", Safety of machinery – Human body measurements – Part 2: Principles for determining the dimensions required for access openings EN 574:1996, Safety of machinery – Two-hand controls devices – Functional aspects – Principles for design !EN 894-1", Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 1: General principles for human interactions with displays and control actuators !EN 894-2", Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 2: Displays !EN 894-3", Safety of machinery – Ergonomics requirements for the design of displays and control actuators – Part 3: Control actuators EN 953:1997, Safety of machinery – Guards – General requirements for the design and construction of fixed and movable guard
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.