EN 12545:2000+A1:2009
(Main)Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements
Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements
1.1 This noise test code specifies common requirements necessary to carry out efficiently and under standardised conditions the determination, declaration and verification of the noise emission characteristics of the following leather and imitation leather goods and footwear manufacturing machinery:
- Cutting and punching machines (EN 12044);
- Roughing, scouring, polishing and trimming machines (EN 930);
- Footwear moulding machines (EN 1845);
- Lasting machines (EN 931);
- Nailing machines (EN 12653);
- Modular shoe repair equipment (EN 12387);
- Shoe and leather presses (EN 12203);
- Splitting, skiving, cutting, cementing and cement drying machines (EN 13457).
Common requirements given in this standard are complemented by specific requirements on noise given in the above mentioned C-type standards.
1.2 Noise emission characteristics include emission sound pressure levels at workstations and the sound power level.
The determination of these quantities is necessary e.g. for:
- manufacturers to declare the noise emitted;
- comparing the noise emitted by machines in the family concerned;
- purposes of noise control at source at the design stage.
1.3 The use of this noise test code and of the specific requirements on noise given in the relevant C-type standard ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement standards used. Preferred noise measurement standards are those of engineering grade of accuracy (grade 2):
Maschinen zur Herstellung von Leder- und Kunstlederwaren und Schuhwerk - Geräuschmessung - Allgemeine Anforderungen
1.1 Diese Geräuschmessnorm legt allgemeine Anforderungen fest, die für eine effiziente und einheitliche
Bestimmung, Angabe und Nachprüfung der Geräuschemissionskenngrößen der folgenden Maschinen zur
Herstellung von Leder- und Kunstlederwaren und Schuhen erforderlich sind:
!
⎯ Stanzmaschinen (EN 12044);
⎯ Aufrau-, Ausglas-, Polier- und Kantenbearbeitungsmaschinen (EN 930);
⎯ Schuhformmaschinen (EN 1845);
⎯ Zwickmaschinen (EN 931);
⎯ Nagelmaschinen (EN 12653);
⎯ Schuhreparaturmaschinen (EN 12387);
⎯ Schuh- und Lederpressen (EN 12203);
⎯ Spalt-, Schärf-, Schneid-, Klebstoffauftrags- und Klebstofftrocknungsmaschinen (EN 13457)."
Die in dieser Norm angegebenen allgemeinen Anforderungen werden durch spezifische Anforderungen zum
Geräusch ergänzt, die in den oben genannten Typ C-Normen angegeben sind.
1.2 Zu den Geräuschemissionskenngrößen gehören der Emissions-Schalldruckpegel am Arbeitsplatz und
der Schallleistungspegel. Die Bestimmung dieser Größen ist erforderlich für:
⎯ den Hersteller zur Geräuschemissionsangabe;
⎯ den Vergleich der von Maschinen einer bestimmten Gruppe emittierten Geräusche;
⎯ die Lärmminderung an der Quelle im Entwurfsstadium.
1.3 Die Anwendung dieser Geräuschmessnorm und der in der betreffenden Typ C-Norm angegebenen
spezifischen Anforderungen zum Geräusch stellt die Reproduzierbarkeit der Bestimmung der Geräuschemissionskenngrößen
innerhalb festgelegter Grenzen sicher, die durch die Genauigkeitsklasse der
verwendeten Grundnormen zur Geräuschmessung bestimmt sind. Vorzuziehen sind Geräuschmessnormen
der Genauigkeitsklasse 2.
Machines de fabrication de chaussures et d'articles en cuir et en matériaux similaires - Code d'essai acoustique - Exigences générales
1.1 Le présent code d'essai acoustique précise les exigences générales nécessaires pour réaliser efficacement
et dans des conditions normalisées la détermination, la déclaration et la vérification des caractéristiques d'émission
sonore des machines pour la fabrication de chaussures et d'articles en cuir et matériaux similaires :
- !Machines de coupe et de poinçonnage (EN 12044) ;
- Machines à carder, à verrer, à polir et à fraiser (EN 930) ;
- Machines de moulage pour chaussures (EN 1845) ;
- Machines à monter (EN 931) ;
- Machines à clouer (EN 12653) ;
- Équipement modulaire de réparation de chaussures (EN 12387) ;
- Presses pour la fabrication de chaussures et articles en cuir (EN 12203) ;
- Machines à refendre, à parer, à rafraîchir, à encoller et à sécher l'adhésif (EN 13457)."
Les exigences générales données dans la présente norme sont complétées par les exigences spécifiques sur le bruit
données dans les normes C indiquées ci-dessus.
1.2 Les grandeurs caractéristiques de l'émission sonore comprennent les niveaux de pression acoustique
d'émission aux postes de travail et le niveau de puissance acoustique. La détermination de ces grandeurs est
nécessaire, par exemple :
- pour que les constructeurs déclarent le bruit émis ;
- pour comparer le bruit émis par les machines de la famille concernée ;
- à des fins de réduction du bruit à la source au stade de la conception.
1.3 L'utilisation de ce code acoustique et des exigences spécifiques données dans la norme C appropriée garantit
la reproductibilité de la détermination des grandeurs caractéristiques d'émission sonore à l'intérieur de limites
spécifiées déterminées par la classe de précision des normes de base de mesurage du bruit qui sont utilisées. Les
normes de mesurage du bruit préférées sont celles de classe de précision expertise (classe 2).
Stroji za izdelavo čevljev, usnjenih izdelkov in izdelkov iz umetnega usnja - Merjenje hrupa - Splošne zahteve
General Information
- Status
- Published
- Publication Date
- 12-May-2009
- Technical Committee
- CEN/TC 201 - Leather and imitation leather goods and footwear manufacturing machinery - Safety
- Drafting Committee
- CEN/TC 201/WG 5 - Noise
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 22-Jun-2022
- Completion Date
- 14-Apr-2025
- Directive
- 98/37/EC - Machinery
Relations
- Effective Date
- 18-Jan-2023
- Effective Date
- 23-Mar-2009
EN 12545:2000+A1:2009 - Noise test code - Common requirements (CEN)
Overview
EN 12545:2000+A1:2009 is a CEN noise test code that defines common requirements for measuring, declaring and verifying noise emissions from footwear, leather and imitation-leather goods manufacturing machines. It covers a range of machine families (cutting/punching, roughing/scouring/polishing, moulding, lasting, nailing, modular repair, presses, splitting/skiving/cementing/drying) and complements the family‑specific (C‑type) noise annexes listed in the standard. The standard targets reproducible determination of sound power levels (LWA) and emission sound pressure levels at workstations (LpA and LpC,peak) using agreed measurement methods.
Key topics and technical requirements
- Scope of machines covered: e.g., EN 12044, EN 930, EN 1845, EN 931, EN 12653, EN 12387, EN 12203, EN 13457 (see standard for full family/sub‑family details).
- Measured quantities: A‑weighted time‑averaged sound power (LWA), A‑weighted emission sound pressure (LpA) and C‑weighted peak pressure (LpC,peak) at specified workstations.
- Preferred measurement grade: Engineering methods (Grade 2) are preferred; Grade 3 (survey) methods only if Grade 2 is not practicable. Typical reference methods include EN ISO 3744, EN ISO 11204 and related ISO/EN acoustics standards.
- Installation & mounting: Tests must use the same mounting/installation as declared in the machine handbook, on an acoustically hard floor (e.g., concrete), with any noise‑reduction features in place. Flexible cables/hoses recommended to avoid extraneous sound radiation.
- Operating conditions: Measurements taken under reproducible, representative operating conditions (complete work cycle) defined in the relevant noise test code annex.
- Uncertainty & reproducibility: Use standard deviations from the basic method; recommended uncertainty K = 2.5 dB (Grade 2) and K = 4 dB (Grade 3) if not otherwise specified.
- Reporting & declaration: Test reports and data sheets must enable third‑party verification and support dual‑number noise declarations in accordance with EN ISO 4871.
Applications and who uses it
- Manufacturers - to declare machine noise values, guide design changes for noise control at source, and document compliance.
- Test laboratories / acoustic engineers - to perform standardized noise measurements and prepare verification reports.
- Purchasers / OEMs / safety managers - to compare noise performance across machine families and select quieter equipment.
- Regulatory bodies / conformity assessors - to verify declared values and check alignment with machinery directives (see annexes ZA/ZB).
Related standards
- C‑type noise annexes for each machine family: EN 12044, EN 930, EN 1845, EN 931, EN 12653, EN 12387, EN 12203, EN 13457.
- Key acoustics references: EN ISO 3743‑1, EN ISO 3744, EN ISO 3746, EN ISO 3747, EN ISO 9614‑1/2, EN ISO 11201/11202/11204, EN ISO 4871.
- Connection to EU machinery directives is addressed in informative Annexes ZA and ZB.
Keywords: noise test code, EN 12545, footwear machinery noise, sound power level, emission sound pressure, CEN, noise measurement, grade 2 acoustics.
Frequently Asked Questions
EN 12545:2000+A1:2009 is a standard published by the European Committee for Standardization (CEN). Its full title is "Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements". This standard covers: 1.1 This noise test code specifies common requirements necessary to carry out efficiently and under standardised conditions the determination, declaration and verification of the noise emission characteristics of the following leather and imitation leather goods and footwear manufacturing machinery: - Cutting and punching machines (EN 12044); - Roughing, scouring, polishing and trimming machines (EN 930); - Footwear moulding machines (EN 1845); - Lasting machines (EN 931); - Nailing machines (EN 12653); - Modular shoe repair equipment (EN 12387); - Shoe and leather presses (EN 12203); - Splitting, skiving, cutting, cementing and cement drying machines (EN 13457). Common requirements given in this standard are complemented by specific requirements on noise given in the above mentioned C-type standards. 1.2 Noise emission characteristics include emission sound pressure levels at workstations and the sound power level. The determination of these quantities is necessary e.g. for: - manufacturers to declare the noise emitted; - comparing the noise emitted by machines in the family concerned; - purposes of noise control at source at the design stage. 1.3 The use of this noise test code and of the specific requirements on noise given in the relevant C-type standard ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement standards used. Preferred noise measurement standards are those of engineering grade of accuracy (grade 2):
1.1 This noise test code specifies common requirements necessary to carry out efficiently and under standardised conditions the determination, declaration and verification of the noise emission characteristics of the following leather and imitation leather goods and footwear manufacturing machinery: - Cutting and punching machines (EN 12044); - Roughing, scouring, polishing and trimming machines (EN 930); - Footwear moulding machines (EN 1845); - Lasting machines (EN 931); - Nailing machines (EN 12653); - Modular shoe repair equipment (EN 12387); - Shoe and leather presses (EN 12203); - Splitting, skiving, cutting, cementing and cement drying machines (EN 13457). Common requirements given in this standard are complemented by specific requirements on noise given in the above mentioned C-type standards. 1.2 Noise emission characteristics include emission sound pressure levels at workstations and the sound power level. The determination of these quantities is necessary e.g. for: - manufacturers to declare the noise emitted; - comparing the noise emitted by machines in the family concerned; - purposes of noise control at source at the design stage. 1.3 The use of this noise test code and of the specific requirements on noise given in the relevant C-type standard ensures the reproducibility of the determination of the noise emission characteristics within specified limits determined by the grade of accuracy of the basic noise measurement standards used. Preferred noise measurement standards are those of engineering grade of accuracy (grade 2):
EN 12545:2000+A1:2009 is classified under the following ICS (International Classification for Standards) categories: 17.140.20 - Noise emitted by machines and equipment; 59.140.40 - Machines and equipment for leather and fur production; 61.060 - Footwear. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12545:2000+A1:2009 has the following relationships with other standards: It is inter standard links to EN 12545:2000/prA1, EN 12545:2000. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12545:2000+A1:2009 is associated with the following European legislation: EU Directives/Regulations: 2006/42/EC, 98/37/EC; Standardization Mandates: M/079, M/396. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 12545:2000+A1:2009 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Maschinen zur Herstellung von Leder- und Kunstlederwaren und Schuhwerk - Geräuschmessung - Allgemeine AnforderungenMachines de fabrication de chaussures et d'articles en cuir et en matériaux similaires - Code d'essai acoustique - Exigences généralesFootwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements61.080Sewing machines and other equipment for the clothing industry59.140.40Stroji in oprema za proizvodnjo usnja in krznaMachines and equipment for leather and fur production17.140.20Emisija hrupa naprav in opremeNoise emitted by machines and equipmentICS:Ta slovenski standard je istoveten z:EN 12545:2000+A1:2009SIST EN 12545:2000+A1:2009en,fr01-julij-2009SIST EN 12545:2000+A1:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12545:2000+A1
May 2009 ICS 17.140.20; 59.140.40; 61.060 Supersedes EN 12545:2000English Version
Footwear, leather and imitation leather goods manufacturing machines - Noise test code - Common requirements
Machines de fabrication de chaussures et d'articles en cuir et en matériaux similaires - Code d'essai acoustique - Exigences générales
Maschinen zur Herstellung von Leder- und Kunstlederwaren und Schuhwerk - Geräuschmessung - Allgemeine Anforderungen This European Standard was approved by CEN on 18 February 2000 and includes Amendment 1 approved by CEN on 17 April 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12545:2000+A1:2009: ESIST EN 12545:2000+A1:2009
!Relationship between this European Standard and the Essential Requirements of EU Directive 98/37/EC"""" . 10Annex ZB (informative)
!!!!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC"""" . 11Bibliography . 12 SIST EN 12545:2000+A1:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...