iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10061:2003

(Main)

Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions

Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions

This European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled steel hexagon bars.

Warmgewalzte Sechskantstäbe aus Stahl - Maße, Formtoleranzen und Grenzabmaße

Diese Europäische Norm legt die Nennmaße, Grenzabmaße und Formtoleranzen für warmgewalzte Sechskant-stäbe aus Stahl fest.

Hexagones en acier laminés à chaud - Dimensions et tolérance sur la forme et les dimensions

La présente Norme européenne spécifie les dimensions nominales et les tolérances sur les dimensions et la forme des hexagones en acier laminés à chaud.

Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions

General Information

Status
Published
Publication Date
28-Oct-2003
Withdrawal Date
29-Apr-2004
ICS
77.140.60 - Steel bars and rods
Technical Committee
ECISS/TC 103 - Structural steels other than reinforcements
Drafting Committee
ECISS/TC 11/SC 1 - Hot rolled steel bars for engineering use. Dimensions and tolerances
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
11-Apr-2024
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/120 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural metallic products and ancillaries
Ref Project
SIST EN 10061:2004 - Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions

Buy Standard

EN 10061:2004EN 10061:2004
PreviousNext
Standard
EN 10061:2004
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensionsWarmgewalzte Sechskantstäbe aus Stahl - Maße, Formtoleranzen und GrenzabmaßeHexagones en acier laminés a chaud - Dimensions et tolérance sur la forme et les dimensionsHot rolled hexagon steel bars for gene
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10058:2018(Main)
Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
SIST EN 10058:2019

This document specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled steel flat bars and steel wide flats for general purposes.
This document is not applicable to spring leaves, see EN 10092-1.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10060:2003(Main)
Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions
SIST EN 10060:2004

This European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled round steel bars.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10059:2003(Main)
Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions
SIST EN 10059:2004

This European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled finished square steel bars for general purposes.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10092-1:2003(Main)
Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions
SIST EN 10092-1:2004

This Part of this European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot rolled steel flat bars for springs with three different types of profiles (A, B, and C). Formulas for calculation the moment of inertia are specified in annex A.
This standard is applicable only to spring steel flat bars produced from steel grades specified in EN 10089.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10092-2:2003(Main)
Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions
SIST EN 10092-2:2004

This Part of this European Standard specifies the nominal dimensions and the tolerances on dimensions and shape of hot rolled spring steel flat bars for ribbed and grooved spring leaves.
This standard is applicable only to steel flats produced from steel grades specified in EN 10089.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10067:1996(Main)
Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass
SIST EN 10067:1998

This European Standard specifies requirements for the nominal dimensions and tolerances on shape, dimensions and mass of hot-rolled bulb flats. These requirements do not apply to bulb flats rolled from stainless steel.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10278:2023(Main)
Dimensions and tolerances of bright steel products of stainless and other special steels
SIST EN 10278:2024

This document applies to bright steel products in the drawn, turned or ground condition delivered in straight lengths. This document is mainly applied to stainless steels of EN 10088-3 and other product standards, e.g. tool steels, roller bearing steels.
This document can also be used for cold heading steels in the form of bars and wire; in case of wire, the thickness and tolerances apply but not the length and the straightness.
The non-alloy and alloy steels of EN 10277 are no longer included.
This document does not cover cold rolled products and cut lengths produced from strip or sheet by cutting.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10058:2018(Main)
Hot rolled flat steel bars and steel wide flats for general purposes - Dimensions and tolerances on shape and dimensions
SIST EN 10058:2019

This document specifies the nominal dimensions and the tolerances on dimensions and shape of hot-rolled steel flat bars and steel wide flats for general purposes.
This document is not applicable to spring leaves, see EN 10092-1.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9443:2018(Main)
Surface quality classes for hot-rolled bars and wire rod (ISO 9443:2018)
SIST EN ISO 9443:2018

This document specifies technical delivery requirements for the surface quality of round bars, squares, hexagons and wire rod in the hot rolled condition with nominal dimensions dN from 5 mm to 200 mm. This document is applicable to bright products and tool steels, if agreed at the time of enquiry and order between manufacturer and purchaser.
By agreement between manufacturer and purchaser, this document can also be applied to other special profiles.
This document is particularly applicable to steels for engineering and structural applications.
This document does not include any requirements for the permissible depth of surface decarburization.
NOTE       The determination of depth of surface decarburization is presented in ISO 3887.
The material standards for steel bars and wire rod can exclude the application of one or other of the surface quality classes of this document. They can also cover requirements for surface quality which deviate from this document. In these cases the requirements of the material standard prevail.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10277:2018(Main)
Bright steel products - Technical delivery conditions
SIST EN 10277:2018

This document specifies the technical delivery requirements for bright steel bars in the drawn, peeled/turned or ground condition and they are intended for mechanical purposes, for example for machine parts. The bright bars are subdivided into the following steel types:
a)   non-alloy general engineering steels;
b)   non-alloy free-cutting steels;
c)   non-alloy and alloy case-hardening steels;
d)   non-alloy and alloy steels for quenching and tempering.
This document lists the mechanical characteristics for products up to 100 mm in thickness. For larger dimensions, the manufacturer and purchaser agree on mechanical properties at the time of enquiry and order.
It does not cover cold rolled products and cut lengths produced from strip or sheet by cutting. Bright steel products of stainless steels are to be found in EN 10088 3.
In addition to this document, the general technical delivery requirements of EN 10021 are applicable.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day