EN 10263-5:2017
(Main)Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
Steel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels
1.1 This European Standard is applicable to round rod, round bars and wire made of stainless steels intended for cold heading and cold extrusion having a diameter up to and including:
- 25 mm for ferritic and austenitic-ferritic steels;
- 50 mm for austenitic steels;
- 100 mm for martensitic steels.
1.2 EN 10263 1 is indispensable for the application of this part of EN 10263.
Walzdraht, Stäbe und Draht aus Kaltstauch- und Kaltfließpressstählen - Teil 5: Technische Lieferbedingungen für nichtrostende Stähle
1.1 Diese Europäische Norm gilt für runden Walzdraht, runde Stäbe und Draht aus nichtrostendem Stahl zum Kaltstauchen und Kaltfließpressen mit einem Durchmesser bis einschließlich:
- 25 mm bei ferritischen und austenitisch-ferritischen Stählen;
- 50 mm bei austenitischen Stählen;
- 100 mm bei martensitischen Stählen.
1.2 EN 10263-1 ist für die Anwendung dieses Teils von EN 10263 unabdingbar.
Barres, fil machine et fils en acier pour transformation à froid et extrusion à froid - Partie 5: Conditions techniques de livraison des aciers inoxydables
1.1 Cette norme européenne s'applique au fil machine, aux barres de section circulaire et aux fils en acier inoxydable pour déformation (frappe à froid) et extrusion à froid de diamètre inférieur ou égal à :
- 25 mm pour les aciers ferritiques et austéno-ferritiques ;
- 50 mm pour les aciers austénitiques ;
- 100 mm pour les aciers martensitiques.
1.2 L'EN 10263-1 est indispensable pour l’application de cette partie de l’EN 10263.
Jekleni drogovi, palice in žica za hladno nakrčevanje in hladno iztiskanje - 5. del: Tehnični dobavni pogoji za nerjavna jekla
1.1 Ta del standarda EN 10263 se uporablja za okrogle drogove in palice ter žice iz nerjavnega jekla, ki so namenjeni za hladno nakrčevanje in hladno iztiskanje ter imajo premer največ:
25 mm za feritna in avstenitno-feritna jekla;
50 mm za avstenitna jekla;
100 mm za martenzitna jekla.
1.2 Dokument prEN 10263-1:2013 je nepogrešljiv za uporabo tega dela standarda EN 10263.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Walzdraht, Stäbe und Draht aus Kaltstauch- und Kaltfließpressstählen - Teil 5: Technische Lieferbedingungen für nichtrostende StähleBarres, fil machine et fils en acier pour transformation à froid et extrusion à froid - Partie 5: Conditions techniques de livraison des aciers inoxydablesSteel rod, bars and wire for cold heading and cold extrusion - Part 5: Technical delivery conditions for stainless steels77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains77.140.60Jeklene palice in drogoviSteel bars and rods77.140.20Visokokakovostna jeklaStainless steelsICS:Ta slovenski standard je istoveten z:EN 10263-5:2017SIST EN 10263-5:2018en,fr,de01-februar-2018SIST EN 10263-5:2018SLOVENSKI
STANDARDSIST EN 10263-5:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10263-5
November
t r s y ICS
y yä s v rä x râ
y yä s v rä x w Supersedes EN
s r t x uæ wã t r r sEnglish Version
Steel rodá bars and wire for cold heading and cold extrusion æ Part
wã Technical delivery conditions for stainless steels Barresá fil machine et fils en acier pour transformation à froid et extrusion à froid æ Partie
wã Conditions techniques de livraison des aciers inoxydables
Walzdrahtá Stäbe und Draht aus Kaltstauchæ und Kaltfließpressstählen æ Teil
wã Technische Lieferbedingungen für nichtrostende Stähle This European Standard was approved by CEN on
v September
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Rue de la Science 23,
B-1040 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r t x uæ wã t r s y ESIST EN 10263-5:2018
= not applicable b If agreed at the time of the enquiry and order. Table 2 — Surface condition at delivery Surface condition at delivery Symbol bar rod wire Cold drawn +C – x x Peeled +PE x – x Skin passed +LC – – x SIST EN 10263-5:2018
8,0 to 10,5 0,10 1,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.