EN 10263-3:2017
(Main)Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
Steel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels
1.1 This Part of EN 10263 is applicable to round rod, round bars and wire with a diameter up to and including 100 mm, of non-alloy and alloy steel, intended for cold heading and cold extrusion and subsequent case hardening treatment.
1.2 prEN 10263-1:2013 is indispensable for this Part of EN 10263.
Walzdraht, Stäbe und Draht aus Kaltstauch- und Kaltfließpressstählen - Teil 3: Technische Lieferbedingungen für Einsatzstähle
1.1 Dieser Teil von EN 10263 gilt für runden Walzdraht, runde Stäbe und Draht mit einem Durchmesser bis einschließlich 100 mm aus unlegiertem und legiertem Stahl zum Kaltstauchen und Kaltfließpressen und nachfolgendem Einsatzhärten.
1.2 Für die Anwendung dieses Teils der Normenreihe EN 10263 ist EN 10263-1 unerlässlich.
Barres, fil machine et fil en acier pour transformation à froid et extrusion à froid - Partie 3 : Conditions techniques de livraison des aciers de cémentation
1.1 La présente partie de l'EN 10263 s'applique aux barres rondes, au fil machine de section ronde, et au fil ayant un diamètre inférieur ou égal à 100 mm, en acier allié et non allié, destinés à des opérations de transformation à froid (frappe à froid), et à des traitements d'extrusion et de cémentation.
1.2 L'EN 10263-1:2017 est un complément indispensable pour cette partie de l’EN 10263.
Jekleni drogovi, palice in žica za hladno nakrčevanje in hladno iztiskanje - 3. del: Tehnični dobavni pogoji za cementirna jekla
1.1 Ta del standarda EN 10263 se uporablja za okrogle drogove in palice ter žice iz nelegiranega in legiranega jekla s premerom največ 100 mm, ki so namenjeni za hladno nakrčevanje in hladno iztiskanje ter nadaljnjo obdelavo s cementiranjem.
1.2 Dokument prEN 10263-1:2013 je nepogrešljiv za ta del standarda EN 10263.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Walzdraht, Stäbe und Draht aus Kaltstauch- und Kaltfließpressstählen - Teil 3: Technische Lieferbedingungen für EinsatzstähleBarres, fil machine et fil en acier pour transformation à froid à froid et extrusion à froid - Partie 3: Conditions techniques de livraison des aciers de cémentationSteel rod, bars and wire for cold heading and cold extrusion - Part 3: Technical delivery conditions for case hardening steels77.140.65Jeklene žice, jeklene vrvi in verigeSteel wire, wire ropes and link chains77.140.60Jeklene palice in drogoviSteel bars and rodsICS:Ta slovenski standard je istoveten z:EN 10263-3:2017SIST EN 10263-3:2018en,fr,de01-februar-2018SIST EN 10263-3:2018SLOVENSKI
STANDARDSIST EN 10263-3:20021DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10263-3
November
t r s y ICS
y yä s v rä x râ
y yä s v rä x w Supersedes EN
s r t x uæ uã t r r sEnglish Version
Steel rodá bars and wire for cold heading and cold extrusion æ Part
uã Technical delivery conditions for case hardening steels Barresá fil machine et fil en acier pour transformation à froid à froid et extrusion à froid æ Partie
uã Conditions techniques de livraison des aciers de cßmentation
Walzdrahtá Stäbe und Draht aus Kaltstauchæ und Kaltfließpressstählen æ Teil
uã Technische Lieferbedingungen für Einsatzstähle This European Standard was approved by CEN on
t x July
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s r t x uæ uã t r s y ESIST EN 10263-3:2018
Others Other delivery conditions may be agreed at the time of ordering Key X = applicable
= not applicable a If agreed at the time of the enquiry and order. SIST EN 10263-3:2018
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.