EN 10092-2:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensionsWarmgewalzte Flachstäbe aus Federstahl - Teil 2: Gerippter Federstahl - Maße, Formtoleranzen und GrenzabmaßePlats laminés a chaud en aciers a ressort - Partie 2: Plats pour lames de ressorts rainées et nervurées - Dimensions et tolérances sur la forme et les dimensionsHot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions77.140.60Jeklene palice in drogoviSteel bars and rods77.140.25Vzmetna jeklaSpring steelsICS:Ta slovenski standard je istoveten z:EN 10092-2:2003SIST EN 10092-2:2004en01-junij-2004SIST EN 10092-2:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10092-2October 2003ICS 77.140.25; 77.140.60English versionHot rolled spring steel flat bars - Part 2: Ribbed and groovedspring leaves - Dimensions and tolerances on shape anddimensionsPlats laminés à chaud en aciers à ressort - Partie 2: Platspour lames de ressorts rainées et nervurées - Dimensionset tolérances sur la forme et les dimensionsWarmgewalzte Flachstäbe aus Federstahl - Teil 2:Gerippter Federstahl - Maße, Formtoleranzen undGrenzabmaßeThis European Standard was approved by CEN on 4 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 10092-2:2003 ESIST EN 10092-2:2004
...