EN 10025-5:2004

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RUR]LMLWarmgewalzte Erzeugnisse aus Baustählen - Teil 5: Technische Lieferbedingungen für wetterfeste BaustähleProduits laminés a chaud en aciers de construction - Partie 5: Conditions techniques de livraison pour les aciers de construction a résistance améliorée a la corrosion atmosphériqueHot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance77.140.50SROL]GHONLFlat steel products and semi-products77.140.10Jekla za toplotno obdelavoHeat-treatable steelsICS:Ta slovenski standard je istoveten z:EN 10025-5:2004SIST EN 10025-5:2005en01-januar-2005SIST EN 10025-5:2005SLOVENSKI
STANDARDSIST EN 10155:19981DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10025-5
November 2004 ICS 77.140.10; 77.140.50
Supersedes EN 10155:1993
English version
Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance
Produits laminés à chaud en aciers de construction -Partie 5: Conditions techniques de livraison pour les aciers de construction à résistance améliorée à la corrosion atmosphérique
Warmgewalzte Erzeugnisse aus Baustählen - Teil 5: Technische Lieferbedingungen für wetterfeste Baustähle This European Standard was approved by CEN on 1 April 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10025-5:2004: ESIST EN 10025-5:2005

List of corresponding former designations.22 Annex B (informative)
List of national standards which correspond with EURONORMS referenced.23 Annex C (informative)
Additional information for the use of steel with improved atmospheric corrosion resistance.24 Annex D (informative)
Notes on fabrication.25 Bibliography.26
2.3 Standards on testing EN 10160, Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method). EN 10306, Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams. EN 10308, Non-destructive testing - Ultrasonic testing of steel bars. EN ISO 643, Steels – Micrographic determination of the apparent grain size (ISO 643:2003). 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 10025-1:2004 and the following apply. SIST EN 10025-5:2005

Steel EN 10025-5 - S355J0W+N (or +AR)
or
Steel EN 10025-5 - 1.8959+N (or +AR) 5 Information to be supplied by the purchaser 5.1 Mandatory information The information that shall be supplied by the purchaser at the time of the order is specified in EN 10025-1. In addition to EN 10025-1 the following information shall be supplied by the purchaser at the time of the order: g) whether products have to be submitted to specific or non-specific inspection and testing and which inspection document is required (see 8.2); 5.2 Options A number of options are specified in Clause 13. In the event that the purchaser does not indicate his wish to implement any of these options, the supplier shall supply in accordance with the basic specification. 6 Manufacturing process 6.1 Steel making process The steel making process shall be in accordance with EN 10025-1. If specified at the time of the order the steel making process shall be reported to the purchaser. See option 1.
1) 1 MPa = 1 N/mm2. SIST EN 10025-5:2005
...