EN 10025-2:2004

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Warmgewalzte Erzeugnisse aus Baustählen - Teil 2: Technische Lieferbedingungen für unlegierte BaustähleProduits laminés a chaud en aciers de construction - Partie 2: Conditions techniques de livraison pour les aciers de construction non alliésHot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels77.140.50SROL]GHONLFlat steel products and semi-products77.140.45Nelegirana jeklaNon-alloyed steels77.140.10Jekla za toplotno obdelavoHeat-treatable steelsICS:Ta slovenski standard je istoveten z:EN 10025-2:2004SIST EN 10025-2:2005en01-januar-2005SIST EN 10025-2:2005SLOVENSKI
STANDARDSIST EN 10025:19961DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10025-2
November 2004 ICS 77.140.10; 77.140.45; 77.140.50
Supersedes EN 10025:1990
English version
Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels
Produits laminés à chaud en aciers de construction -Partie 2: Conditions techniques de livraison pour les aciers de construction non alliés
Warmgewalzte Erzeugnisse aus Baustählen - Teil 2: Technische Lieferbedingungen für unlegierte Baustähle This European Standard was approved by CEN on 1 April 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10025-2:2004: ESIST EN 10025-2:2005

List of national standards which correspond with EURONORMS referenced.33 Bibliography.34
2.2 Standards on dimensions and tolerances (see 7.7.1) EN 10017, Non-alloy steel rod for drawing and/or cold rolling – Dimensions and tolerances. EN 10024, Hot rolled taper flange I sections - Tolerances on shape and dimensions. EN 10029, Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions, shape and mass. EN 10034, Structural steel I and H sections - Tolerances on shape and dimensions. EN 10048, Hot rolled narrow steel strip - Tolerances on dimensions and shape. EN 10051, Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape. EN 10055, Hot-rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions. EN 10056-1, Structural steel equal and unequal leg angles - Part 1: Dimensions. EN 10056-2, Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions. EN 10058, Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions. EN 10059, Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions. EN 10060, Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions. EN 10061, Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions. EN 10067, Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass. EN 10162, Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances. EN 10279, Hot rolled steel channels - Tolerances on shape and dimensions.
see Annex A, Table A.1. 4.2.2 The designation shall consist of: − number of this document (EN 10025-2); − steel name or the steel number; the steel name consisting of:  symbol S (for structural steel) or E (for engineering steel);  indication of the minimum specified yield strength for thickness ≤ 16 mm expressed in MPa1);  if applicable, the quality designation (see 4.1.2) in respect of specified impact energy values;  if applicable, the additional symbol C for the suitability for the particular application (see Tables 10, 11, 12 and 13).  indication "+N or +AR", when the products are ordered and delivered in the condition +N or +AR (see 3.1, 3.2 and 6.3). The indication "+N or +AR" shall also be added to the steel number. EXAMPLE Structural steel (S) with a specified minimum yield strength at ambient temperature of 355 MPa1), with a minimum impact energy value of 27 J at 0 ºC (J0) and suitable for cold flanging (C), delivery condition normalized rolled (or as rolled):
Steel EN 10025-2 - S355J0C+N (or +AR)
or
Steel EN 10025-2 - 1.0554+N (or +AR) 5 Information to be supplied by the purchaser 5.1 Mandatory information The information that shall be supplied by the purchaser at the time of the order is specified in EN 10025-1. In addition to EN 10025-1 the following information shall be supplied by the purchaser at the time of the order:
1) 1 MPa = 1 N/mm2. SIST EN 10025-2:2005
...