EN ISO 3834-6:2024

SLOVENSKI STANDARD
oSIST prEN ISO 3834-6:2022
01-december-2022
Zahteve za kakovost pri talilnem varjenju kovinskih materialov - 6. del: Smernice
za izvajanje ISO 3834 (ISO/DIS 3834-6:2022)
Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on
implementing ISO 3834 (ISO/DIS 3834-6:2022)
Qualitätsanforderungen für das Schmelzschweißen von metallischen Werkstoffen - Teil
6: Richtlinie zur Einführung von ISO 3834 (ISO/DIS 3834-6:2022)
Exigences de qualité en soudage par fusion des matériaux métalliques - Partie 6: Lignes
directrices pour la mise en application de l'ISO 3834 (ISO/DIS 3834-6:2022)
Ta slovenski standard je istoveten z: prEN ISO 3834-6
ICS:
03.120.99 Drugi standardi v zvezi s Other standards related to
kakovostjo quality
25.160.10 Varilni postopki in varjenje Welding processes
oSIST prEN ISO 3834-6:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN ISO 3834-6:2022
oSIST prEN ISO 3834-6:2022
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3834-6
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:
2022-10-11 2023-01-03
Quality requirements for fusion welding of metallic
materials —
Part 6:
Guidelines on implementing ISO 3834
Exigences de qualité en soudage par fusion des matériaux métalliques —
Partie 6: Lignes directrices pour la mise en application de l'ISO 3834
ICS: 25.160.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 3834-6:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

oSIST prEN ISO 3834-6:2022
ISO/DIS 3834-6:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 3834-6
ISO/TC 44/SC 10 Secretariat: DIN
Voting begins on: Voting terminates on:

Quality requirements for fusion welding of metallic
materials —
Part 6:
Guidelines on implementing ISO 3834
Exigences de qualité en soudage par fusion des matériaux métalliques —
Partie 6: Lignes directrices pour la mise en application de l'ISO 3834
ICS: 25.160.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 3834-6:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

oSIST prEN ISO 3834-6:2022
ISO/DIS 3834-6:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Abbreviated terms . 1
5 Using ISO 3834. 2
5.1 General . 2
5.2 Product standards . 2
5.3 Purchasers and users . 2
5.4 Quality management systems in accordance with ISO 9001 . 2
5.5 Quality management systems other than ISO 9001 . 2
5.6 Manufacturers . 2
6 Incorporating ISO 3834 in product standards . 2
7 Using other documents with ISO 3834 . 3
8 Documentation and quality systems .3
8.1 Documentation . 3
8.2 Quality management system . 4
9 Selecting the level of quality requirements . 6
10 Implementation in fabrication .8
10.1 General guidelines for implementation . 8
10.1.1 Basic principles . 8
10.1.2 Implementation . 8
10.1.3 Control of welding . 8
10.1.4 Production procedures . 9
10.2 Organization . 11
11 Interpretation of particular clauses in ISO 3834 .11
11.1 Requirements review and technical review . 11
11.2 Sub-contracting . 11
11.3 Welding coordination .12
11.3.1 General .12
11.3.2 Welding coordinator .12
11.3.3 Welding inspection personnel . 13
11.3.4 NDT personnel . 13
11.3.5 Correlation between ISO 14731 and ISO 3834 quality levels .13
11.4 Equipment . 14
11.5 Welding activities . 14
11.6 Storage of parent metal . 14
11.7 Calibration and validation .15
11.8 Identification and traceability . 15
12 Assessment and certification .16
Annex A (informative) Examples of documents for the control of welding-related activities .17
Bibliography .20
iii
oSIST prEN ISO 3834-6:2022
ISO/DIS 3834-6:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 44, Welding and allied processes,
Subcommittee SC 10, Quality management in the field of welding.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
Official interpretations o
...