iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 17736:2022

(Main)

Entertainment technology - Specifications for design and manufacture of aluminium stage decks and frames

Entertainment technology - Specifications for design and manufacture of aluminium stage decks and frames

This document specifies the requirements for the design and manufacture of aluminium decks and frames used in the entertainment industry.
This document does not apply to scaffolding used as substructures in stage and studio environments in accordance with the EN 12810 series and the EN 12811 series or fairground rides in accordance with EN 13814-1.

Veranstaltungstechnik - Anforderungen an die Bemessung und Herstellung von Podesten und Zargen aus Aluminium

Dieses Dokument legt die Anforderungen an die Bemessung und Herstellung von in der Veranstaltungsbranche verwendeten Podesten und Zargen aus Aluminium fest.
Dieses Dokument ist nicht anzuwenden für die in Bühnen- und Studioumgebungen als Unterkonstruktion verwendeten Gerüste nach der Normenreihe EN 12810 und der Normenreihe EN 12811 sowie nicht für fliegende Bauten nach EN 13814 1.

Technologies du spectacle - Spécifications pour la conception et la fabrication de praticables de scène en aluminium

Le présent document spécifie les exigences pour la conception et la fabrication des praticables de scène en aluminium utilisés dans l'industrie du spectacle.
Le présent document ne s'applique pas aux échafaudages utilisés comme sous-structures dans les environnements scéniques et de studio conformément aux séries de normes EN 12810 et EN 12811, ni aux manèges de parcs d'attractions conformément à l'EN 13814-1.

Razvedrilna tehnologija - Specifikacije za projektiranje in izdelavo aluminijastih odrov in okvirjev

Ta dokument določa varnostne zahteve za načrtovanje, izbiro, proizvodnjo, predvideno uporabo ter preskušanje aluminijastih odrov in okvirjev, ki jih je mogoče uporabiti kot aluminijaste odrske ploščadi, naklone in stopnice, vključno z ograjami za prireditvene površine (odre) in tribune.
Ta dokument obravnava vsa večja tveganja, nevarne situacije in nevarne dogodke v zvezi z aluminijastimi odri in okvirji, kadar se uporabljajo v skladu s predvidenim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določi proizvajalec.
Če ti izdelki postanejo sestavni deli grajenega okolja, se pričakuje, da bodo upoštevane konstrukcijske zahteve.
Ta dokument se ne uporablja za odre, ki se uporabljajo kot podkonstrukcije v odrskem in studijskem okolju v skladu s skupino standardov EN 12810 in EN 12811, ter zabaviščne naprave v skladu s standardom EN 13814-1.

General Information

Status
Published
Publication Date
15-Nov-2022
ICS
97.200.10 - Theatre, stage and studio equipment
Technical Committee
CEN/TC 433 - Entertainment technology - Equipment, technical installations and machinery used on stages and other production areas within the entertainment industry
Drafting Committee
CEN/TC 433/WG 2 - Working materials
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
16-Nov-2022
Due Date
21-Feb-2023
Completion Date
16-Nov-2022
Ref Project
SIST EN 17736:2023 - Entertainment technology - Specifications for design and manufacture of aluminium stage decks and frames

Buy Standard

EN 17736:2023EN 17736:2023
PreviousNext
Standard
EN 17736:2023
English language
24 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2023
Razvedrilna tehnologija - Specifikacije za projektiranje in izdelavo aluminijastih
odrov in okvirjev
Entertainment technology - Specifications for design and manufacture of aluminium
stage decks and frames
Veranstaltungstechnik - Anforderungen an die Bemessung und Herstellung von
Podesten und Zargen aus Aluminium
Technologies du spectacle - Spécifications pour la conception et la fabrication de
praticables de scène en aluminium
Ta slovenski standard je istoveten z: EN 17736:2022
ICS:
91.080.17 Aluminijaste konstrukcije Aluminium structures
97.200.10 Gledališka, odrska in Theatre, stage and studio
studijska oprema ter delovne equipment
postaje
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 17736
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2022
EUROPÄISCHE NORM
ICS 97.200.10
English Version
Entertainment technology - Specifications for design and
manufacture of aluminium stage decks and frames
Technologies du spectacle - Spécifications pour la Veranstaltungstechnik - Anforderungen an die
conception et la fabrication de praticables de scène en Bemessung und Herstellung von Podesten und Zargen
aluminium aus Aluminium
This European Standard was approved by CEN on 12 September 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17736:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 List of significant hazards . 7
5 Engineering . 9
5.1 General . 9
5.2 Design . 9
5.3 Analysis . 9
5.3.1 General . 9
5.3.2 Load assumptions . 9
5.4 Engineering documentation . 10
6 Manufacture . 10
6.1 General . 10
6.2 Materials . 10
6.2.1 General . 10
6.2.2 Fire behaviour . 10
6.2.3 Surface condition . 11
6.3 Welding . 11
6.4 Inspection . 11
6.5 Identification . 11
6.6 Manufacturing documentation . 11
7 Additional design requirements for stairs, ramps and guardrails . 11
7.1 Stairs . 11
7.2 Ramps . 12
7.3 Guardrails . 12
7.3.1 General . 12
7.3.2 Guardrails for stages . 12
7.3.3 Guardrails for areas with public access . 13
7.4 Alignment of stage decks . 13
8 Ancillary items . 13
9 Test requirements and procedures . 13
9.1 General . 13
9.2 Preperation of the test . 14
9.3 Vertical test loads . 14
9.3.1 Uniformly distributed load (UDL) . 14
9.3.2 Point load . 14
9.4 Horizontal test load . 14
9.5 Verification of test results . 14
9.6 Documentation of test results . 14
10 User documentation and technical data sheet . 15
10.1 User documentation . 15
10.2 Technical data sheet . 15
Annex A (informative) Technical data sheet example. 16
Annex B (informative) Example of test setups for testing aluminium stage decks and
frames . 18
B.1 General . 18
B.2 Application of test loads . 18
Annex C (informative) Test report examples . 20
C.1 Example of test report for stage decks or frames . 20
C.2 Example of test report for guardrails . 21
Annex D (informative) Inspection report example . 23
Bibliography . 24

European foreword
This document (EN 17736:2022) has been prepared by Technical Committee CEN/TC 433
“Entertainment Technology - Machinery, equipment and installations”, the secretariat of which is held by
DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2023, and conflicting national standards shall be
withdrawn at the latest by May 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This is a type C standard as specified in EN ISO 12100.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
The object of this document is to achieve a minimum level of quality in the design and manufacture of
aluminium stage decks and frames in the entertainment industry.
Entertainment technology is an interdisciplinary field with specific technology and unique safety
requirements. Entertainment technology is used in places of assembly, staging and production areas for
events and theatrical productions. Such locations include but are not limited to theatres, multi-purpose
halls, exhibition halls, film-, television-, photography- and radio-studios as well as facilities in concert
halls, museums, schools, bars, discotheques, open-air stages and other places for shows and events. In
some cases, atypical non-performance places are also used.
This document has been developed based on the previous requirements of DIN 15921:2015-09.
This document has been drawn up according to past experience and risk analysis.
1 Scope
This document specifies the requirements for the design and manufacture of aluminium decks and frames
used in the entertainment industry.
This document does not apply to scaffolding used as substructures in stage and studio environments in
accordance with the EN 12810 series and the EN 12811 series or fairground rides in accordance with
EN 13814-1.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitute
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 17206-2:2023(Main)
Entertainment technology - Machinery for stages and other production areas - Part 2: Safety requirements for stands and truss lifts
SIST EN 17206-2:2024

This document applies to manually operated and or power-driven stands with an Entertainment Load Limit (ELL) of more than 3 kg.
NOTE 1   The ELL is the maximum load that an item of lifting equipment is designed to raise, lower or sustain.
This is part 2 of the EN 17206 series.
This document applies to stands which are used in places of assembly and in staging and production facilities for events and theatrical productions.
Stands within the meaning of this document are used for the purposes of lifting, lowering, and holding loads (e.g. scenic elements, trusses, lighting and audiovisual equipment). It is also possible for several stands to carry a common load.
These installations are not permitted to be used for the transportation of persons or for the movement of loads above people’s heads.
Standing under loads is permitted when these are at rest.
NOTE 2   Only during setup, the operator might, for operational reasons, be required to stand in the hazard zone for short periods of time.
This document also applies to installations with new technologies or customized designs that are not expressly named here but are being used in identical modes of operation.
This document does not apply to:
—   stands with a Load Limit ≤ 3 kg;
—   camera stands;
—   wooden stands.
This document also specifies the information to be communicated between manufacturers and users, and the details that are to be provided with regards to the intended use of the machinery installations.
The significant hazards dealt with in this document are identified in Clause 4.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17795-5:2023(Main)
Entertainment technology - Codes of Practice - Part 5: Lifting and motion operations in the event industry
SIST EN 17795-5:2024

This code of practice provides a set of guidelines for lifting and motion operations related to machinery and machinery installations used in staging and production facilities for events.
This document is pertinent to all the machinery phases, assembly, commissioning, setting, operation and dismantling employed in the event industry including machinery defined in point j, Article 1.2 of the Machinery Directive (2006/42/EC): "machinery intended to move performers during artistic performances".
This document also applies to machinery and machinery installations based on new technologies or specially designed installations which are not expressly mentioned here but which nevertheless operate in a similar manner or are meant for similar purposes to those listed above.
This document does not provide specific details but is intended to provide general guidelines on planning and the process of lifting and motion operations.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17206:2020/AC:2021(Corrigendum)
Entertainment technology - Machinery for stages and other production areas - Safety requirements and inspections
SIST EN 17206:2020/AC:2021

This document applies to machinery, machinery installations and machinery control systems used in places of assembly and in staging and production facilities for events and theatrical productions (stage machinery, for short). Such facilities include: theatres, multi-purpose halls, exhibition halls; film, television and radio studios; concert halls, schools, bars, discotheques, open-air stages and other rooms for shows and events.
The document applies to machinery installations with guided or unguided loads.
This document covers machinery used in the entertainment industry including machinery that is excluded from the Machinery Directive (2006/42/EC) specifically Article 1, 2(j) which excludes "machinery intended to move performers during artistic performances".
This machinery includes controls, electrical and electronic control systems, electrical and electronic equipment, hydraulic and pneumatic power supplies.
The principles in this document also apply to machinery installations based on new technologies or specially designed installations which are not expressly mentioned here but which nevertheless operate in a similar manner or are meant for similar purposes to the equipment listed above.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17206:2020(Main)
Entertainment technology - Machinery for stages and other production areas - Safety requirements and inspections
SIST EN 17206:2020

This document applies to machinery, machinery installations and machinery control systems used in places of assembly and in staging and production facilities for events and theatrical productions (stage machinery, for short). Such facilities include: theatres, multi-purpose halls, exhibition halls; film, television and radio studios; concert halls, schools, bars, discotheques, open-air stages and other rooms for shows and events.
The document applies to machinery installations with guided or unguided loads.
This document covers machinery used in the entertainment industry including machinery that is excluded from the Machinery Directive (2006/42/EC) specifically Article 1, 2(j) which excludes "machinery intended to move performers during artistic performances".
This machinery includes controls, electrical and electronic control systems, electrical and electronic equipment, hydraulic and pneumatic power supplies.
The principles in this document also apply to machinery installations based on new technologies or specially designed installations which are not expressly mentioned here but which nevertheless operate in a similar manner or are meant for similar purposes to the equipment listed above.

  • Standard
    107 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17115:2018(Main)
Entertainment technology - Specifications for design and manufacture of aluminium and steel trusses
SIST EN 17115:2018

This document defines the requirements for the design and manufacture of aluminium and steel trusses used in the entertainment industry.
This document does not cover individual, separate rigging hardware like shackles, wire ropes, slings and other lifting accessories.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17206-2:2023(Main)
Entertainment technology - Machinery for stages and other production areas - Part 2: Safety requirements for stands and truss lifts
SIST EN 17206-2:2024

This document applies to manually operated and or power-driven stands with an Entertainment Load Limit (ELL) of more than 3 kg.
NOTE 1   The ELL is the maximum load that an item of lifting equipment is designed to raise, lower or sustain.
This is part 2 of the EN 17206 series.
This document applies to stands which are used in places of assembly and in staging and production facilities for events and theatrical productions.
Stands within the meaning of this document are used for the purposes of lifting, lowering, and holding loads (e.g. scenic elements, trusses, lighting and audiovisual equipment). It is also possible for several stands to carry a common load.
These installations are not permitted to be used for the transportation of persons or for the movement of loads above people’s heads.
Standing under loads is permitted when these are at rest.
NOTE 2   Only during setup, the operator might, for operational reasons, be required to stand in the hazard zone for short periods of time.
This document also applies to installations with new technologies or customized designs that are not expressly named here but are being used in identical modes of operation.
This document does not apply to:
—   stands with a Load Limit ≤ 3 kg;
—   camera stands;
—   wooden stands.
This document also specifies the information to be communicated between manufacturers and users, and the details that are to be provided with regards to the intended use of the machinery installations.
The significant hazards dealt with in this document are identified in Clause 4.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17879:2023(Main)
Event structures - Safety requirements
SIST EN 17879:2024

This document specifies the minimum requirements necessary to ensure the safe design, calculation, manufacture, assembly, operation, disassembly, inspection and maintenance of the following, but not limited to:
•   structures e.g. stage roofs, stage floors, follow spot towers, PA towers,
•   LED support structures,
•   one-off event structures,
•   hospitality structures,
•   temporary spectator facilities.
The above hereafter called event structures are structures intended to be installed and dismantled specifically for an event.
This document does not cover:
•   Spectator facilities – EN 13200-series,
•   Temporary structure – Tents – safety by EN 13782,
•   Fairground and amusement park machinery and structures as per EN 13814 series,
•   Temporary works equipment covered by CEN/TC 53,
•   Inflatable play equipment-safety requirements and test methods as per EN 14960,
•   Entertainment Technology as described by CEN TC 433.
NOTE   This document is not applicable to event structures which are designed, manufactured, placed on the market or put in service before the date of publication of this document by CEN.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17795-5:2023(Main)
Entertainment technology - Codes of Practice - Part 5: Lifting and motion operations in the event industry
SIST EN 17795-5:2024

This code of practice provides a set of guidelines for lifting and motion operations related to machinery and machinery installations used in staging and production facilities for events.
This document is pertinent to all the machinery phases, assembly, commissioning, setting, operation and dismantling employed in the event industry including machinery defined in point j, Article 1.2 of the Machinery Directive (2006/42/EC): "machinery intended to move performers during artistic performances".
This document also applies to machinery and machinery installations based on new technologies or specially designed installations which are not expressly mentioned here but which nevertheless operate in a similar manner or are meant for similar purposes to those listed above.
This document does not provide specific details but is intended to provide general guidelines on planning and the process of lifting and motion operations.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13200-4:2023(Main)
Spectator facilities - Part 4: Seats - Product characteristics
SIST EN 13200-4:2023

This document specifies mechanical, physical and chemical product characteristics of fixed seating for spectator facilities used in sports venues (indoor and outdoor) in the spectator viewing area. It also specifies the criteria for fixing the seating to the structure.
These characteristics and criteria are determined to ensure an adequate resistance to static and dynamic stresses and to atmospheric agents. This document specifies comfort, functionality and safety requirements to prevent serious injury through normal use, as well as misuse that might reasonably be excepted to occur. This document does not include any fire behaviour or resistance requirements.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17206:2020/AC:2021(Corrigendum)
Entertainment technology - Machinery for stages and other production areas - Safety requirements and inspections
SIST EN 17206:2020/AC:2021

This document applies to machinery, machinery installations and machinery control systems used in places of assembly and in staging and production facilities for events and theatrical productions (stage machinery, for short). Such facilities include: theatres, multi-purpose halls, exhibition halls; film, television and radio studios; concert halls, schools, bars, discotheques, open-air stages and other rooms for shows and events.
The document applies to machinery installations with guided or unguided loads.
This document covers machinery used in the entertainment industry including machinery that is excluded from the Machinery Directive (2006/42/EC) specifically Article 1, 2(j) which excludes "machinery intended to move performers during artistic performances".
This machinery includes controls, electrical and electronic control systems, electrical and electronic equipment, hydraulic and pneumatic power supplies.
The principles in this document also apply to machinery installations based on new technologies or specially designed installations which are not expressly mentioned here but which nevertheless operate in a similar manner or are meant for similar purposes to the equipment listed above.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day