EN ISO 8030:2014
(Main)Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)
Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)
ISO 8030:2014 specifies a method for assessing the flammability of hoses, except for hoses intended for use with petroleum fuels for combustion engines. The method is restricted to hoses of sizes up to and including nominal bore of 50 mm.
Gummi- und Kunststoffschläuche - Verfahren zur Prüfung der Entflammbarkeit (ISO 8030:2014)
Diese Internationale Norm legt ein Verfahren zur Beurteilung der Entflammbarkeit von Schläuchen fest, ausgenommen Schläuche für die Verwendung mit Benzin für Verbrennungsmotoren. Das Verfahren ist begrenzt auf Schläuche mit Nenndurchmessern bis zu 50 mm.
ANMERKUNG 1 Der Anwender wird auf die entsprechende Schlauchnorm mit den Anforderungen hinsichtlich Brennen und Nachglühen verwiesen.
ANMERKUNG 2 Das Verfahren für die Prüfung der Entflammbarkeit von Schläuchen für die Verwendung mit Benzin ist festgelegt in ISO 13774.
Tuyaux en caoutchouc et en plastique - Méthode d'essai d'inflammabilité (ISO 8030:2014)
L'ISO 8030:2014 spécifie une méthode pour l´évaluation de l'inflammabilité des tuyaux en caoutchouc et en plastique, à l'exception des tuyaux prévus pour être utilisés avec les carburants pétroliers dans les moteurs à combustion. La méthode est limitée aux tuyaux ayant un diamètre intérieur nominal inférieur ou égal à 50 mm.
Gumene in polimerne cevi - Metoda preskušanja vnetljivosti (ISO 8030:2014)
Standard EN ISO 8030 določa metodo za ocenjevanje vnetljivosti cevi z izjemo cevi, namenjenih uporabi z naftnimi gorivi pri motorjih z izgorevanjem. Metoda je omejena na cevi z največjo velikostjo in nazivnim premerom 50 mm.
General Information
- Status
- Published
- Publication Date
- 15-Jul-2014
- Withdrawal Date
- 30-Jan-2015
- Technical Committee
- CEN/TC 218 - Rubber and plastics hoses and hose assemblies
- Drafting Committee
- CEN/TC 218 - Rubber and plastics hoses and hose assemblies
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 16-Jul-2014
- Completion Date
- 16-Jul-2014
- Directive
- 89/106/EEC - Construction products
Relations
- Replaces
EN ISO 8030:1997 - Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995) - Effective Date
- 23-Jul-2014
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Overview
EN ISO 8030:2014 - "Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)" is a CEN-adopted ISO test method for assessing the flammability of rubber and plastic hoses (nominal bore ≤ 50 mm). It is a small-scale, laboratory screening and quality-control test (not a full-scale fire prediction). The 2014 edition replaces the 1997/1995 versions and updates the heat source to a calibrated gas (Bunsen-type) burner.
Key topics and technical requirements
- Scope and limits
- Applies to hoses up to and including nominal bore 50 mm.
- Excludes hoses intended for petroleum fuels for internal-combustion engines (see ISO 13774).
- Test specimen and conditioning
- Test piece: 300 mm length; six specimens per test.
- No test within 24 h of manufacture; condition specimens at standard temperature and humidity per ISO 23529 for at least 3 h.
- Apparatus
- Draught-free cabinet (or fume hood), gas (Bunsen-type) burner with tube I.D. (10 ± 0.5) mm, commercial propane (ISO 9162), NiCr/NiAl thermocouple (ISO 8056-1).
- Procedure
- Burner preheated and adjusted to produce flame height 150–180 mm with inner flame ≈50 mm and thermocouple temperature 1 000 °C ± 20 °C.
- Burner positioned at 45° beneath the mid-point of the horizontally supported test piece, top of burner ~50 mm below the bottom edge of the hose.
- Exposure time: 60 s (±1 s); record flame persistence and afterglow time; observe for dripping or free burning.
- Results and acceptance
- Report duration of flame and afterglow for each specimen; compute mean values.
- Default acceptance (unless specified in a product hose standard): mean flame ≤ 1 minute and mean afterglow ≤ 3 minutes.
- Test report requirements
- Must include a mandatory cautionary statement that results are indicative only and not a measure of full fire hazard, plus details such as hose nominal bore, type, manufacture date/batch, reinforcement, test date and measured results.
Applications and users
- Practical use: quality control, material screening, specification compliance, and suitability checks (commonly used for underground service hoses and other applications where small-scale flammability is relevant).
- Typical users:
- Hose manufacturers and product engineers
- Test laboratories and quality assurance teams
- Specifiers, purchasers and compliance officers in industrial, construction and utility sectors
- Standards and certification bodies
Related standards
- ISO 13774 - flammability test method for hoses used with petroleum fuels (excluded from ISO 8030 scope)
- ISO 23529 - conditioning of rubber test pieces
- ISO 8056-1 - thermocouple requirements
- ISO 9162 - specification for commercial propane fuel
Keywords: EN ISO 8030:2014, flammability test, rubber and plastics hoses, hose testing, hose safety, propane burner test, hose quality control.
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
Kiwa BDA Testing
Building and construction product certification.
Sponsored listings
Frequently Asked Questions
EN ISO 8030:2014 is a standard published by the European Committee for Standardization (CEN). Its full title is "Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)". This standard covers: ISO 8030:2014 specifies a method for assessing the flammability of hoses, except for hoses intended for use with petroleum fuels for combustion engines. The method is restricted to hoses of sizes up to and including nominal bore of 50 mm.
ISO 8030:2014 specifies a method for assessing the flammability of hoses, except for hoses intended for use with petroleum fuels for combustion engines. The method is restricted to hoses of sizes up to and including nominal bore of 50 mm.
EN ISO 8030:2014 is classified under the following ICS (International Classification for Standards) categories: 13.220.40 - Ignitability and burning behaviour of materials and products; 23.040.70 - Hoses and hose assemblies. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 8030:2014 has the following relationships with other standards: It is inter standard links to EN ISO 8030:1997, EN 1889-2:2003+A1:2009, EN 12321:2003+A1:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 8030:2014 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN ISO 8030:2014 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2014
1DGRPHãþD
SIST EN ISO 8030:2000
Gumene in polimerne cevi - Metoda preskušanja vnetljivosti (ISO 8030:2014)
Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014)
Gummi- und Kunststoffschläuche - Verfahren zur Prüfung der Entflammbarkeit (ISO
8030:2014)
Tuyaux en caoutchouc et en plastique - Méthode d'essai d'inflammabilité (ISO
8030:2014)
Ta slovenski standard je istoveten z: EN ISO 8030:2014
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
83.140.40 Gumene cevi Hoses
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 8030
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2014
ICS 23.040.70; 13.220.40 Supersedes EN ISO 8030:1997
English Version
Rubber and plastics hoses - Method of test for flammability (ISO
8030:2014)
Tuyaux en caoutchouc et en plastique - Méthode d'essai Gummi- und Kunststoffschläuche - Verfahren zur Prüfung
d'inflammabilité (ISO 8030:2014) der Entflammbarkeit (ISO 8030:2014)
This European Standard was approved by CEN on 28 June 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8030:2014 E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 8030:2014) has been prepared by Technical Committee ISO/TC 45 “Rubber and
rubber products” in collaboration with Technical Committee CEN/TC 218 “Rubber and plastics hoses and
hose assemblies” the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2015, and conflicting national standards shall be withdrawn at
the latest by January 2015.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8030:1997.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8030:2014 has been approved by CEN as EN ISO 8030:2014 without any modification.
INTERNATIONAL ISO
STANDARD 8030
Third edition
2014-07-15
Rubber and plastics hoses — Method
of test for flammability
Tuyaux en caoutchouc et en plastique — Méthode d’essai
d’inflammabilité
Reference number
ISO 8030:2014(E)
©
ISO 2014
ISO 8030:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
ISO 8030:2014(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 General . 1
4 Apparatus . 1
5 Test piece . 2
6 Conditioning . 2
7 Procedure. 2
8 Expression of results . 2
9 Requirements . 3
10 Test report . 3
Bibliography . 7
ISO 8030:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-gove
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...