EN 1837:2020
(Main)Safety of machinery - Integral lighting of machines
Safety of machinery - Integral lighting of machines
This document specifies the parameters of integral lighting systems designed to provide illumination in and/or at both stationary and mobile machines to enable the safe use of the machine and the efficient performance of the visual task within and/or at the machine to be carried out by the operator.
This document does not specify lighting systems mounted on the machine to specifically illuminate visual tasks outside the machine. The function and requirements of these systems are specified in the European standard dealing with the lighting of work places, see EN 12464-1 and EN 12464-2 for further information.
This document does not specify additional requirements for the operation of lighting systems:
- in severe conditions (extreme environmental conditions such as freezer applications, high temperatures, etc.);
- subject to special rules (e.g. explosive atmospheres);
- where the transmittance is reduced by environmental conditions, such as smoke, splashing, etc.
Sicherheit von Maschinen - Maschinenintegrierte Beleuchtung
Dieses Dokument legt die Parameter für integrierte Beleuchtungssysteme fest, die für die Beleuchtung in und/oder an sowohl stationären als auch mobilen Maschinen entworfen sind, um den sicheren Gebrauch der Maschine und die wirkungsvolle Durchführung der Sehaufgabe in und/oder an der Maschine durch das Bedienungspersonal zu ermöglichen.
Dieses Dokument spezifiziert keine Beleuchtungssysteme, die an der Maschine montiert sind, um insbesondere Sehaufgaben außerhalb der Maschine zu beleuchten. Die Funktion und die Anforderungen dieser Systeme sind in der Europäischen Norm für die Arbeitsstättenbeleuchtung festgelegt, siehe EN 12464 1 und EN 12464 2 für weitere Informationen.
Dieses Dokument legt keine zusätzlichen Anforderungen für den Betrieb der Beleuchtungssysteme fest:
- unter schwierigen Bedingungen (extreme Umgebungseinflüsse, wie Anwendungen in Kühlaggregaten, bei hohen Temperaturen usw.);
- bei bestehenden speziellen Vorschriften (z. B. für Anforderungen des Explosionsschutzes);
- wenn der Transmissionsgrad durch Umgebungseinflüsse beeinträchtigt ist, wie durch Rauch, Spritzer usw.
Sécurité des machines - Éclairage intégré aux machines
Le présent document spécifie les paramètres des systèmes d'éclairage intégré conçus pour fournir l'éclairage dans et/ou sur les machines fixes et mobiles en assurant la sécurité d'utilisation et la bonne exécution de la tâche visuelle dans et/ou sur la machine à effectuer par l’opérateur.
Le présent document ne spécifie pas les systèmes d'éclairage disposés sur les machines, pour éclairer spécifiquement des zones extérieures à la machine où s'effectuent des tâches visuelles. La fonction et les exigences de ces systèmes sont indiquées dans la Norme européenne traitant de l'éclairage des lieux de travail, voir l’EN 12464-1 ainsi que dans l’EN 12464-2 pour de plus amples informations.
Le présent document ne spécifie pas d'exigences supplémentaires pour le fonctionnement des systèmes d'éclairage :
- dans des conditions difficiles (dans des conditions environnantes extrêmes, telles que des applications pour congélateurs, des températures élevées, etc.) ;
- lorsqu'il est soumis à des règles spécifiques (par exemple des atmosphères explosives) ;
- lorsque le facteur de transmission est réduit par des conditions environnantes telles que la fumée, des éclaboussures, etc.
Varnost strojev - Integralna razsvetljava strojev
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1837:2021
01-maj-2021
Nadomešča:
SIST EN 1837:1999+A1:2009
Varnost strojev - Integralna razsvetljava strojev
Safety of machinery - Integral lighting of machines
Sicherheit von Maschinen - Maschinenintegrierte Beleuchtung
Sécurité des machines - Éclairage intégré aux machines
Ta slovenski standard je istoveten z: EN 1837:2020
ICS:
13.110 Varnost strojev Safety of machinery
91.160.10 Notranja razsvetljava Interior lighting
SIST EN 1837:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 1837:2021
---------------------- Page: 2 ----------------------
SIST EN 1837:2021
EN 1837
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2020
EUROPÄISCHE NORM
ICS 13.110; 91.160.10 Supersedes EN 1837:1999+A1:2009
English Version
Safety of machinery - Integral lighting of machines
Sécurité des machines - Éclairage intégré aux machines Sicherheit von Maschinen - Maschinenintegrierte
Beleuchtung
This European Standard was approved by CEN on 18 October 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1837:2020 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 1837:2021
EN 1837:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Lighting requirements . 7
4.1 General . 7
4.2 Illuminance . 7
4.3 Glare . 7
4.4 Directionality . 7
4.5 Colour quality . 8
4.6 Stroboscopic effect . 8
4.7 Ergonomic principles . 8
4.8 Emergency lighting .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.