EN 13675:2004+A1:2010
(Main + Amendment)Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment
Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment
This European Standard describes the health and safety requirements of fully automated plant used in the process of tube forming, rolling and finishing (hereafter referred to as "plant"). It describes the foreseeable, significant hazards, hazardous situations, and events arising from plants and from particular machines integrated to form the plant; it does not describe the full health and safety requirements for each particular machine. It indicates preventive measures for avoiding the hazards and reducing the risks. It deals not only with circumstances where the machinery is used as intended, but also includes other conditions foreseen by the manufacturer, such as foreseeable faults, malfunctions or misuse.
This European Standard specifies the requirements to ensure the safety of persons which are to be met during the design, assembly, transport, commissioning, operation, maintenance and decommissioning of the equipment.
This standard assumes that installations are operated and maintained by adequately trained and competent personnel. Manual intervention for setting, adjustment and maintenance is accepted as part of the normal use of these machines.
This standard assumes that the machinery is used with adequate workplace lighting conforming to
EN 12464-1 or to local regulations.
This standard applies to:
Automated plant and equipment operated for the production of metal seamless hot and cold finished tubes and welded tubes. A list of machines which could make up different plants is shown in Annex D (informative).
This standard covers:
For seamless hot-finished tubes: from material charging downstream of the heating furnace through the rolling process and up to, but not including any intermediate storage equipment or the downstream finishing lines.
For seamless cold-finished tubes: from material charging through the rolling process to the discharging equipment but not including any storage equipment.
For welded tubes: from coil charging through strip pr
Sicherheit von Maschinen - Sicherheitsanforderungen an Rohrform- und -walzwerke und ihre Adjustageanlagen
Dieses Dokument beschreibt die allgemeinen Sicherheitsanforderungen an automatisierte Anlagen für die
Herstellung von geformten und gewalzten Rohren und deren Adjustage (im nachfolgenden Text „Anlagen“
genannt). Es beschreibt vorhersehbare, signifikante Gefährdungen, Gefährdungssituationen und -ereignisse
für Anlagen und für Einzelmaschinen, aus denen die Anlage besteht. Es beschreibt nicht alle Gesundheitsund
Sicherheitsanforderungen an jede einzelne Maschine. Es zeigt vorbeugende Maßnahmen zur
Vermeidung der Gefährdungen und Reduzierung der Risiken auf. Es behandelt nicht nur die Gegebenheiten,
bei denen die Maschine bestimmungsgemäß genutzt wird, sondern beinhaltet auch andere Bedingungen, die
der Hersteller in Betracht gezogen hat, wie vorhersehbare Fehler, Fehlfunktionen oder fehlerhafte Nutzung.
Dieses Dokument spezifiziert die Anforderungen, die erfüllt werden müssen, um die Sicherheit von Personen
während der Konstruktion, des Baus, des Transports, der Inbetriebnahme, des Betriebs, der Instandhaltung
und der Außerbetriebnahme sicherzustellen.
Dieses Dokument geht davon aus, dass die Anlagen von entsprechend geschultem und fachkundigem
Personal bedient und gewartet werden. Das manuelle Eingreifen zum Einrichten, Einstellen und zur Wartung
wird als Teil des normalen Einsatzes dieser Maschinen akzeptiert.
Dieses Dokument geht davon aus, dass die Maschinen bei entsprechender Arbeitsplatzbeleuchtung nach
!EN 12464-1" oder gemäß lokalen Bestimmungen genutzt werden.
Dieses Dokument gilt für:
Automatisierte Anlagen und Ausrüstungen zur Herstellung von warm- und kaltgewalzten Nahtlosrohren sowie
geschweißten Rohren. Eine Liste von Maschinen mit denen verschiedene Anlagen zusammengesetzt werden
können, ist in Anhang D (informativ) aufgeführt.
Dieses Dokument umfasst:
Sécurité des machines - Prescriptions de sécurité pour formeuses et laminoirs à tubes et leurs lignes de parachèvement
La présente Norme européenne spécifie les prescriptions d’hygiène et de sécurité générales pour les équipements automatisés utilisés pour les formeuses et les laminoirs à tubes ainsi que les ligne de parachèvement (ci-après dénommés «équipements»). Elle décrit les phénomènes, situations et événements dangereux prévisibles et significatifs pour ces installations y compris les machines particulières intégrées à celles-ci. Elle indique les mesures préventives possibles pour éliminer les phénomènes dangereux et réduire les risques. Elle ne prend pas seulement en compte les conditions liées à l'usage prévu de la machine, elle inclut aussi celles prévues par le fabricant comme les défauts, les dysfonctionnements ou les mauvais usages prévisibles.
La présente Norme européenne spécifie les prescriptions à satisfaire pour garantir la sécurité des personnes pendant la conception, la construction, le transport, la mise en service, le fonctionnement, la maintenance et la mise hors service de l’équipement.
La présente norme suppose que l'exploitation et la maintenance des installations soient réalisées par un personnel compétent et formé de façon adaptée. L’intervention manuelle pour l’installation, le réglage et la maintenance est considéré comme faisant partie de l’usage normal de ces machines.
Cette norme suppose que les installations sont utilisées avec un éclairage adéquat des postes de travail conforme à l’!EN 12464-1" ou à la réglementation locale.
Cette norme s'applique aux :
Installations et équipements automatiques destinés à la production de tubes en métal non soudés laminés à chaud et à froid et de tubes soudés. Une liste de machines pour installations différentes est présentée en Annexe D (informative).
Varnost strojev - Varnostne zahteve za cevarne, valjarne in opremo za pakiranje blaga
Ta evropski standard opisuje zdravstvene in varnostne zahteve za popolnoma avtomatiziran obrat, ki se uporablja v procesih cevarn, valjarn in pakiranja blaga (v nadaljevanju »obrat«). Opisuje predvidljive pomembne nevarnosti, nevarne situacije in dogodke, ki izhajajo iz obratov ter posameznih strojev, ki so del obrata; ne opisuje popolnih zdravstvenih in varnostnih zahtev za vsak posamezen stroj. Navaja preventivne ukrepe za preprečevanje nevarnosti in zmanjševanje tveganj. Obravnava ne le okoliščine, v katerih se stroji uporabljajo kot predvideno, pač pa vključuje tudi druge pogoje, ki jih predvidi proizvajalec, na primer predvidene napake, okvare ali napačno uporabo. Ta evropski standard določa zahteve za zagotavljanje varnosti oseb, ki so vključene v načrtovanje, sestavljanje, prevoz, usposobitev za zagon, delovanje, vzdrževanje in izločitev opreme iz uporabe. Ta standard predvideva, da inštalacije upravlja in vzdržuje primerno usposobljeno in pristojno osebje. Ročni posegi v nastavitve, prilagoditve in vzdrževanje so sprejemljivi kot del normalne uporabe teh strojev.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Varnost strojev - Varnostne zahteve za cevarne, valjarne in opremo za pakiranje blagaSicherheit von Maschinen - Sicherheitsanforderungen an Rohrform- und -walzwerke und AdjustageanlagenSécurité des machines - Prescriptions de sécurité pour formeuses et laminoirs à tubes et de lignes de parachèvementSafety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment77.180Oprema za metalurško industrijoEquipment for the metallurgical industry25.120.20Rolling, extruding and drawing equipment13.110Varnost strojevSafety of machineryICS:Ta slovenski standard je istoveten z:EN 13675:2004+A1:2010SIST EN 13675:2004+A1:2010en,fr01-junij-2010SIST EN 13675:2004+A1:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13675:2004+A1
April 2010 ICS 77.180 Supersedes EN 13675:2004English Version
Safety of machinery - Safety requirements for tube forming and rolling mills and their finishing line equipment
Sécurité des machines - Prescriptions de sécurité pour formeuses et laminoirs à tubes et de lignes de parachèvement
Sicherheit von Maschinen - Sicherheitsanforderungen an Rohrform- und -walzwerke und Adjustageanlagen This European Standard was approved by CEN on 1 April 2004 and includes Amendment 1 approved by CEN on 21 February 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13675:2004+A1:2010: ESIST EN 13675:2004+A1:2010
!Safety requirements and/or measures for electrical equipment and control systems at tube forming and rolling mills and finishing line equipment" . 39Annex B (normative)
!Noise test code" . 43Annex C (informative)
An example of manufacturer's safety instructions for maintenance . 47Annex D (informative)
List of typical plants/machinery covered by this standard . 49Annex ZA (informative)
!Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC" . 51Bibliography . 52
Annexes C and D are informative. An assessment of the foreseeable risks arising from the use of the plant/machinery was carried out when this standard was drafted by CEN/TC 322/WG 3, comprising experts from the following countries: Denmark, Germany, Italy, Sweden and the United Kingdom. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
!EN 12464-1" or to local regulations. This standard applies to: Automated plant and equipment operated for the production of metal seamless hot and cold finished tubes and welded tubes. A list of machines which could make up different plants is shown in Annex D (informative). This standard covers: For seamless hot-finished tubes: from material charging downstream of the heating furnace through the rolling process and up to, but not including any intermediate storage equipment or the downstream finishing lines. For seamless cold-finished tubes: from material charging through the rolling process to the discharging equipment but not including any storage equipment. For welded tubes: from coil charging through strip preparation, forming and welding equipment up to, but not including any intermediate storage equipment or the downstream finishing lines. For the tube finishing line: from tube charging to the discharging equipment to the storage. The following items are outside the scope of this standard: complete risk assessment of single machines which are used to form a plant furnaces; quenching equipment; spiral tube manufacture; large diameter tube welding manufacture using three-roll bending machines, U-ing and O-ing press lines and their finishing lines; butt welding machinery for the manufacture of endless strips; irradiation units (material testing by e. g., ultrasonic and X-ray testing units); centrifugal casting machines; machine tools used for e. g., threading, chamfering, stamping and marking machines; SIST EN 13675:2004+A1:2010
Part 1: General principles for human interactions with displays and control actuators EN 894-2, Safety of machinery — Ergonomics requirements for the design of displays and control actuators —
Part 2: Displays EN 894-3, Safety of machinery — Ergonomics requirements for the design of displays and control actuators —
Part 3: Control actuators EN 953:1997, Safety of machinery — Guards — General requirements for the design and construction of fixed and movable guards EN 981:1996, Safety of machinery — System of auditory and visual danger and information signals EN 982:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Hydraulics EN 983:1996, Safety of machinery — Safety requirements for fluid power systems and their components — Pneumatics EN 999:1998, Safety of machinery
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.