EN ISO 15480:2019
(Main)Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)
Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)
This document specifies the characteristics of hexagon washer head drilling screws with tapping screw threads, made of steel, with thread sizes ST2,9 to ST6,3, and with product grade A.
Mechanische Verbindungselemente - Sechskant-Bohrschrauben mit Bund mit Blechschraubengewinde (ISO 15480:2019)
Dieses Dokument legt Eigenschaften für Sechskant-Bohrschrauben mit Bund mit Blechschraubengewinde, aus Stahl, mit den Gewindegrößen ST2,9 bis ST6,3 und der Produktklasse A fest.
Fixations - Vis autoperceuses à tête hexagonale à embase plate, avec filetage de vis à tôle (ISO 15480:2019)
Le présent document spécifie les caractéristiques des vis autoperceuses à tête hexagonale à embase plate, en acier, de dimensions de filetage de ST2,9 à ST6,3, et de grade A.
Vezni elementi - Vrtalni vijaki s šestrobo glavo s podložko in samoreznim pločevinskim navojem (ISO 15480:2019)
Ta dokument določa značilnosti vrtalnih vijakov s šestrobo glavo s podložko in samoreznim navojem iz jekla, z velikostmi navojev od ST2,9 do ST6,3 in razredom izdelave A.
General Information
- Status
- Published
- Publication Date
- 09-Jul-2019
- Withdrawal Date
- 30-Jan-2020
- Technical Committee
- CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 10-Jul-2019
- Completion Date
- 10-Jul-2019
Relations
- Replaces
EN ISO 15480:1999 - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:1999) - Effective Date
- 26-Apr-2017
Overview
EN ISO 15480:2019 (ISO 15480:2019) defines the characteristics of steel hexagon washer head drilling screws with tapping screw thread, covering thread sizes ST2,9 to ST6,3 and product grade A. The standard sets dimensional requirements (Figure 1 and Table 1), references related normative documents, and provides designation and acceptance guidance. It is intended to ensure consistent manufacturing, inspection and interchangeability for applications that require drilling and tapping into sheet or plate.
Key Topics
- Scope and product grade: Applies to hexagon washer head drilling screws made of steel, product grade A.
- Dimensions & symbols: Dimensions are specified in the standard (see Figure 1 and Table 1) with symbols defined by ISO 225.
- Thread sizes: Covers tapping thread sizes ST2,9 through ST6,3.
- Drilling point & function: The drilling point function is specified referencing ISO 10666.
- Material and finish: Material is steel; finishes include as-processed (no coating) or electroplated coatings per ISO 4042. Additional finishes are by agreement between supplier and purchaser.
- Tolerances & acceptance: Product grade tolerances follow ISO 4759-1; acceptance inspection is to ISO 3269.
- Designation example: "Hexagon head drilling screw ISO 15480 – ST3,5 × 16" (example provided in the standard).
Why this matters: The standard ensures manufacturing consistency and reliable fitment when selecting hexagon washer head drilling screws for sheet-metal assemblies, improving design certainty and supply-chain quality control.
Applications
- Fastening operations where a drilling screw must form or tap threads in sheet or plate material.
- Use in light-to-medium sheet-metal assemblies, metal panels and components where hexagon washer head form is required for bearing surface and drive.
- Practical for designers, purchasers and manufacturers who need clear specification for dimensions, coatings and acceptance criteria.
Practical guidance:
- Select the correct thread size (ST2,9–ST6,3) and nominal length according to sheet thickness and any air gap; the standard notes that nominal length l is measured from bearing face to the last major thread diameter and additional allowance may be needed for air gaps.
- Specify any non-standard coatings, lengths or additional requirements by agreement between purchaser and manufacturer.
- Use ISO 3269 procedures for acceptance inspection to ensure lot compliance.
Related Standards
The standard references and aligns with several ISO documents that should be consulted when specifying or inspecting these fasteners:
- ISO 10666 - Drilling screws with tapping screw thread (mechanical and functional properties)
- ISO 1478 - Tapping screw thread
- ISO 3269 - Fasteners - Acceptance inspection
- ISO 4042 - Electroplated coating systems for fasteners
- ISO 4759-1 - Tolerances for fasteners - Product grades A, B and C
- ISO 8992 - General requirements for bolts, screws, studs and nuts
- ISO 225 - Symbols and descriptions of dimensions
- ISO 7053 - Hexagon washer head tapping screws (related form)
For specification, procurement and quality assurance, reference EN ISO 15480:2019 together with the normative standards listed above to ensure complete compliance and interoperability across suppliers and applications.
Frequently Asked Questions
EN ISO 15480:2019 is a standard published by the European Committee for Standardization (CEN). Its full title is "Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO 15480:2019)". This standard covers: This document specifies the characteristics of hexagon washer head drilling screws with tapping screw threads, made of steel, with thread sizes ST2,9 to ST6,3, and with product grade A.
This document specifies the characteristics of hexagon washer head drilling screws with tapping screw threads, made of steel, with thread sizes ST2,9 to ST6,3, and with product grade A.
EN ISO 15480:2019 is classified under the following ICS (International Classification for Standards) categories: 21.060.01 - Fasteners in general; 21.060.10 - Bolts, screws, studs. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 15480:2019 has the following relationships with other standards: It is inter standard links to EN ISO 15480:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 15480:2019 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2019
Nadomešča:
SIST EN ISO 15480:2001
Vezni elementi - Vrtalni vijaki s šestrobo glavo s podložko in samoreznim
pločevinskim navojem (ISO 15480:2019)
Fasteners - Hexagon washer head drilling screws with tapping screw thread (ISO
15480:2019)
Mechanische Verbindungselemente - Sechskant-Bohrschrauben mit Bund mit
Blechschraubengewinde (ISO 15480:2019)
Fixations - Vis autoperceuses à tête hexagonale à embase plate, avec filetage de vis à
tôle (ISO 15480:2019)
Ta slovenski standard je istoveten z: EN ISO 15480:2019
ICS:
21.060.10 Sorniki, vijaki, stebelni vijaki Bolts, screws, studs
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 15480
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2019
EUROPÄISCHE NORM
ICS 21.060.10 Supersedes EN ISO 15480:1999
English Version
Fasteners - Hexagon washer head drilling screws with
tapping screw thread (ISO 15480:2019)
Fixations - Vis autoperceuses à tête hexagonale à Mechanische Verbindungselemente - Sechskant-
embase plate, avec filetage de vis à tôle (ISO Bohrschrauben mit Bund mit Blechschraubengewinde
15480:2019) (ISO 15480:2019)
This European Standard was approved by CEN on 24 May 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15480:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 15480:2019) has been prepared by Technical Committee ISO/TC 2 "Fasteners"
in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by
BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2020, and conflicting national standards shall
be withdrawn at the latest by January 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15480:1999.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 15480:2019 has been approved by CEN as EN ISO 15480:2019 without any modification.
INTERNATIONAL ISO
STANDARD 15480
Second edition
2019-06
Fasteners — Hexagon washer head
drilling screws with tapping screw
thread
Fixations — Vis autoperceuses à tête hexagonale à embase plate, avec
filetage de vis à tôle
Reference number
ISO 15480:2019(E)
©
ISO 2019
ISO 15480:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
ISO 15480:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Dimensions . 1
5 Requirements and reference International Standards . 3
6 Designation . 4
Bibliography . 5
ISO 15480:2019(E)
Foreword
ISO (the Internationa
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...