EN 12274-4:2003
(Main)Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix
This draft European standard specifies a method for design of slurry mix measuring the minimum cohesion to determine the 'set time' and the "trafficability time" of a slurry surfacing. This European standard applies to slurry surfacing to be used in surface layers excluding airfields pavements.
Dünne Asphaltschicht in Kaltbauweise - Prüfverfahren - Teil 4: Bestimmung der Kohäsion der Mischung
Dieser Europäische Norm-Entwurf legt ein Verfahren zur Zusammensetzung von Schlämme-Mischgut fest, mit dem die Brechzeit und die Verkehrsfreigabezeit einer Schlämme-Schicht durch Messung der Mindest-Kohäsion bestimmt werden. Dieser Europäische Norm-Entwurf gilt für dünne Asphaltschichten in Kaltbauweise, die in Oberflächenschutzschichten verwendet werden; sie gilt nicht für Flugplätze.
Matériaux bitumineux coulés à froid - Méthode d'essai - Partie 4: Détermination de la cohésion du mélange
La présente Norme européenne décrit une méthode d'essai pour déterminer la cohésion minimale d'un matériau bitumineux coulé à froid pour permettre d'en connaître le temps de prise et le délai de remise en circulation.
Cette Norme Européenne s'applique aux matériaux bitumineux coulés à froid utilisés en couche de surface.
NOTE Pour certains mélanges grenus, la précision est faible à cause d'une perte important de granulats, une observation devra être mentionnée dans le rapport d'essai.
Obnovitev površine z emulzijo – Preskusne metode - 4. del: Ugotavljanje kohezije zmesi
General Information
- Status
- Withdrawn
- Publication Date
- 04-Feb-2003
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 227 - Road materials
- Drafting Committee
- CEN/TC 227/WG 2 - Surface dressing and slurry surfacing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 28-Mar-2018
- Completion Date
- 21-Jan-2026
- Directive
- 89/106/EEC - Construction products
Relations
- Replaced By
EN 12274-4:2018 - Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix - Effective Date
- 04-Apr-2018
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN ISO 4017:2022 - Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2022) - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN ISO 2009:2011 - Slotted countersunk flat head screws - Product grade A (ISO 2009:2011) - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN ISO 4035:2012 - Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012) - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Frequently Asked Questions
EN 12274-4:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Slurry surfacing - Test methods - Part 4: Determination of cohesion of the mix". This standard covers: This draft European standard specifies a method for design of slurry mix measuring the minimum cohesion to determine the 'set time' and the "trafficability time" of a slurry surfacing. This European standard applies to slurry surfacing to be used in surface layers excluding airfields pavements.
This draft European standard specifies a method for design of slurry mix measuring the minimum cohesion to determine the 'set time' and the "trafficability time" of a slurry surfacing. This European standard applies to slurry surfacing to be used in surface layers excluding airfields pavements.
EN 12274-4:2003 is classified under the following ICS (International Classification for Standards) categories: 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12274-4:2003 has the following relationships with other standards: It is inter standard links to EN 12274-4:2018, EN 596:1995, EN ISO 8674:2012, EN ISO 7045:2011, EN ISO 7436:2024, EN ISO 10642:2004, EN ISO 4017:2022, EN ISO 4017:2011, EN ISO 7719:2012, EN ISO 4014:2011, EN ISO 2009:2011, EN ISO 2342:2003, EN ISO 4035:2012, EN ISO 7041:2025, EN ISO 7048:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12274-4:2003 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 12274-4:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Obnovitev površine z emulzijo –
Preskusne metode - 4. del: Ugotavljanje kohezije zmesiDünne Asphaltschicht in Kaltbauweise - Prüfverfahren - Teil 4: Bestimmung der Kohäsion der MischungMatériaux bitumineux coulés a froid - Méthode d'essai - Partie 4: Détermination de la cohésion du mélangeSlurry surfacing - Test methods - Part 4: Determination of cohesion of the mix93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12274-4:2003SIST EN 12274-4:2004en01-junij-2004SIST EN 12274-4:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12274-4February 2003ICS 93.080.20English versionSlurry surfacing - Test methods - Part 4: Determination ofcohesion of the mixMatériaux bitumineux coulés à froid - Méthode d'essai -Partie 4: Détermination de la cohésion du mélangeDünne Asphaltschicht in Kaltbauweise - Prüfverfahren - Teil4: Bestimmung der Kohäsion der MischungThis European Standard was approved by CEN on 21 November 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12274-4:2003 ESIST EN 12274-4:2004
1 In preparation.SIST EN 12274-4:2004
EN 12
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...