EN 12373-9:1998
(Main)Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus
Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus
This part of this European Standard specifies a method of test for determining the wear resistance and the wear index of anodic oxidation coatings on flat specimens of aluminium and its alloys by means of an abrasive wheel wear test apparatus.
Aluminium und Aluminiumlegierungen - Anodisieren - Teil 9: Messung der Abriebfestigkeit und der Abriebzahl von anodisch erzeugten Oxidschichten durch Abriebprüfung mit einem Schleifscheiben-Prüfgerät
Dieser Teil dieser Europäischen Norm legt ein Verfahren zur Bestimmung der Abriebfestigkeit und der Abriebzahl von anodisch erzeugten Oxidschichten auf flachen Proben aus Aluminium und Aluminiumlegierungen fest, bei dem ein Abriebprüfgerät mit Schleifscheibe eingesetzt wird.
Aluminium et alliages d'aluminium - Anodisation - Partie 9: Détermination de la résistance à l'usure et de l'indice d'usure des couches d'oxyde anodiques par essai à la roue abrasive
Cette partie de la présente norme européenne spécifie une méthode de détermination de la résistance à l'usure et de l'indice d'usure des couches anodiques formées sur une éprouvette plate d'aluminium ou d'un de ses alliages, par l'intermédiaire d'un essai d'usure effectué à l'aide d'un appareil comportant une roue abrasive.
Aluminij in aluminijeve zlitine - Anodna oksidacija - 9. del: Meritve obrabne obstojnosti in obrabnega števila anodnooksidiranih prevlek z brusnim kolutom
General Information
- Status
- Withdrawn
- Publication Date
- 17-Nov-1998
- Withdrawal Date
- 31-Jan-2011
- Technical Committee
- CEN/TC 132 - Aluminium and aluminium alloys
- Drafting Committee
- CEN/TC 132/WG 15 - Aluminium anodisation
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Feb-2011
- Completion Date
- 01-Feb-2011
Relations
- Effective Date
- 22-Dec-2008
- Referred By
EN ISO 8030:1997 - Rubber and plastics hoses - Method of test for flammability (ISO 8030:1995) - Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
CARES (UK Certification Authority for Reinforcing Steels)
UK certification for reinforcing steels and construction.
DVS-ZERT GmbH
German welding certification society.
Sponsored listings
Frequently Asked Questions
EN 12373-9:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatus". This standard covers: This part of this European Standard specifies a method of test for determining the wear resistance and the wear index of anodic oxidation coatings on flat specimens of aluminium and its alloys by means of an abrasive wheel wear test apparatus.
This part of this European Standard specifies a method of test for determining the wear resistance and the wear index of anodic oxidation coatings on flat specimens of aluminium and its alloys by means of an abrasive wheel wear test apparatus.
EN 12373-9:1998 is classified under the following ICS (International Classification for Standards) categories: 25.220.20 - Surface treatment; 77.120.10 - Aluminium and aluminium alloys. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12373-9:1998 has the following relationships with other standards: It is inter standard links to EN ISO 8251:2011, EN ISO 8030:1997. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12373-9:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminij in aluminijeve zlitine - Anodna oksidacija - 9. del: Meritve obrabne obstojnosti in obrabnega števila anodnooksidiranih prevlek z brusnim kolutomAluminium und Aluminiumlegierungen - Anodisieren - Teil 9: Messung der Abriebfestigkeit und der Abriebzahl von anodisch erzeugten Oxidschichten durch Abriebprüfung mit einem Schleifscheiben-PrüfgerätAluminium et alliages d'aluminium - Anodisation - Partie 9: Détermination de la résistance a l'usure et de l'indice d'usure des couches d'oxyde anodiques par essai a la roue abrasiveAluminium and aluminium alloys - Anodizing - Part 9: Measurement of wear resistance and wea
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...