EN 1013-3:1997
(Main)Light transmitting profiled plastic sheeting for single skin roofing - Part 3: Specific requirements and test methods for sheets of polyvinyl chloride (PVC)
Light transmitting profiled plastic sheeting for single skin roofing - Part 3: Specific requirements and test methods for sheets of polyvinyl chloride (PVC)
This part of prEN 1013 specifies requirements for materials and performance of light transmitting profiled sheets of polyvinyl chloride produced to the desired profile by extrusion and/or forming for single skin applications. It has to be read in conjunction with the general requirements contained in prEN 1013-1. Requirements specified are relative to: sheet thickness, visual characteristics, longitudinal reversion, retention of profile, tensile impact strength, thermal ageing. Test methods are indicated as appropriate.
Lichtdurchlässige profilierte Platten aus Kunststoff für einschalige Dacheindeckungen - Teil 3: Besondere Anforderungen und Prüfmethoden für Platten aus Polyvinylchlorid (PVC)
Dieser Teil von prEN 1013 beschreibt die speziellen Anforderungen an lichtdurchlässige profilierte Platten aus Polyvinylchlorid (PVC) für einschalige Dacheindeckungen. Er ist in Verbindung mit den allgemeinen Anforderungen zu sehen, die in prEN 1013-1 formuliert sind. Es werden Anforderungen an folgende Eigenschaften beschrieben: Plattendicke, allgemeine Beschaffenheit, Dimensionsstabilität in Fertigungsrichtung, Dimensionsstabilität quer zur Fertigungsrichtung, Schlagzugfestigkeit; Wärmealterung. Prüfverfahren werden, soweit erforderlich, beschrieben.
Plaques profilées éclairantes en matière plastique pour couverture en simple paroi - Partie 3: Exigences spécifiques et méthodes d'essai pour plaques en polychlorure de vinyle (PVC)
Cette partie de la norme EN 1013 définit les exigences sur la matière et les performances des plaques profilées en polychlorure de vinyle pour l'éclairement et produites soit par extrusion et/ou par thermoformage, utilisées en couverture en simple paroi. Elle doit être appliquée en relation avec les exigences générales contenues dans prEN 1013-1. Les exigences spécifiques portent sur les faits suivants: épaisseur de la plaque, caractéristiques visuelles, retrait longitudinal, retrait transversal, classification après vieillissement par la mesure de choc traction, vieillissement thermique.
Prosojna profilirana plastična obloga za enojno pokrivanje streh - 3. del: Posebne zahteve in preskusne metode za plošče iz polivinilklorida (PVC)
General Information
- Status
- Withdrawn
- Publication Date
- 18-Nov-1997
- Withdrawal Date
- 11-Dec-2012
- Technical Committee
- CEN/TC 128 - Roof covering products for discontinuous laying and products for wall cladding
- Drafting Committee
- CEN/TC 128/SC 9 - Prefabricated accessories for roofing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 12-Dec-2012
- Completion Date
- 12-Dec-2012
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 08-Jun-2022
Get Certified
Connect with accredited certification bodies for this standard
Smithers Quality Assessments
US management systems and product certification.
DIN CERTCO
DIN Group product certification.
Sponsored listings
Frequently Asked Questions
EN 1013-3:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Light transmitting profiled plastic sheeting for single skin roofing - Part 3: Specific requirements and test methods for sheets of polyvinyl chloride (PVC)". This standard covers: This part of prEN 1013 specifies requirements for materials and performance of light transmitting profiled sheets of polyvinyl chloride produced to the desired profile by extrusion and/or forming for single skin applications. It has to be read in conjunction with the general requirements contained in prEN 1013-1. Requirements specified are relative to: sheet thickness, visual characteristics, longitudinal reversion, retention of profile, tensile impact strength, thermal ageing. Test methods are indicated as appropriate.
This part of prEN 1013 specifies requirements for materials and performance of light transmitting profiled sheets of polyvinyl chloride produced to the desired profile by extrusion and/or forming for single skin applications. It has to be read in conjunction with the general requirements contained in prEN 1013-1. Requirements specified are relative to: sheet thickness, visual characteristics, longitudinal reversion, retention of profile, tensile impact strength, thermal ageing. Test methods are indicated as appropriate.
EN 1013-3:1997 is classified under the following ICS (International Classification for Standards) categories: 83.140 - Rubber and plastics products. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1013-3:1997 has the following relationships with other standards: It is inter standard links to EN 1013:2012, prEN 1013. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1013-3:1997 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/BC/CEN/87/13. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1013-3:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtdurchlässige profilierte Platten aus Kunststoff für einschalige Dacheindeckungen - Teil 3: Besondere Anforderungen und Prüfmethoden für Platten aus Polyvinylchlorid (PVC)Plaques profilées éclairantes en matiere plastique pour couverture en simple paroi - Partie 3: Exigences spécifiques et méthodes d'essai pour plaques en polychlorure de vinyle (PVC)Light transmitting profiled plastic sheeting for single skin roofin
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...