EN ISO 15614-1:2017/A1:2019

SLOVENSKI STANDARD
01-marec-2020
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus varilnega
postopka - 1. del: Obločno in plamensko varjenje jekel in obločno varjenje niklja in
nikljevih zlitin - Dopolnilo A1 (ISO 15614-1:2017/Amd 1:2019)
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and
nickel alloys - Amendment 1 (ISO 15614-1:2017/Amd 1:2019)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 1: Lichtbogen- und Gasschweißen von Stählen und
Lichtbogenschweißen von Nickel und Nickellegierungen - Änderung 1 (ISO 15614-
1:2017/Amd 1:2019)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 1:
Soudage à l'arc et aux gaz des aciers et soudage à l'arc du nickel et des alliages de
nickel - Amendement 1 (ISO 15614-1:2017/Amd 1:2019)
Ta slovenski standard je istoveten z: EN ISO 15614-1:2017/A1:2019
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
77.080.20 Jekla Steels
77.120.40 Nikelj, krom in njune zlitine Nickel, chromium and their
alloys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 15614-1:2017/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2019
EUROPÄISCHE NORM
ICS 25.160.10
English Version
Specification and qualification of welding procedures for
metallic materials - Welding procedure test - Part 1: Arc
and gas welding of steels and arc welding of nickel and
nickel alloys - Amendment 1 (ISO 15614-1:2017/Amd
1:2019)
Descriptif et qualification d'un mode opératoire de Anforderung und Qualifizierung von Schweißverfahren
soudage pour les matériaux métalliques - Épreuve de für metallische Werkstoffe -
qualification d'un mode opératoire de soudage - Partie Schweißverfahrensprüfung - Teil 1: Lichtbogen- und
1: Soudage à l'arc et aux gaz des aciers et soudage à Gasschweißen von Stählen und Lichtbogenschweißen
l'arc du nickel et des alliages de nickel - Amendement 1 von Nickel und Nickellegierungen - Änderung 1 (ISO
(ISO 15614-1:2017/Amd 1:2019) 15614-1:2017/Amd 1:2019)
This amendment A1 modifies the European Standard EN ISO 15614-1:2017; it was approved by CEN on 16 December 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15614-1:2017/A1:2019 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/68/EU (PED) . 4
Annex ZB (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive 2014/29/EU (SPVD) . 5

European foreword
This document (EN ISO 15614-1:2017/A1:2019) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and
allied processes” the secretariat of which is held by DIN.
This Amendment to the European Standard ISO 15614-1:2017 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by February 2020,
and conflicting national standards shall be withdrawn at the latest by February 2020.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA and ZB, which is an integral part of this
document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 15614-1:2017/Amd 1:2019 has been approved by CEN as EN ISO 15614-
1:2017/A1:2019 without any modification.

Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2014/68/EU (PED)
This European Standard has been prepared under a Commission's standardization request M/071
“Mandate to CEN for standardization in the field of pressure equipment” to provide one voluntary
means of conforming to essential requirements of Directive 2014/68/EU (PED) on the harmonisation of
the laws of the Member States relating to the making available on the market of pressure equipment.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of confor
...