EN 15085-4:2007

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Railway applications - Welding of railway vehicles and components - Part 4: Production requirementsŽelezniške naprave - Varjenje železniških vozil in elementov - 4. del: Zahteve za proizvodnjoApplications ferroviaires - Soudage des véhicules ferroviaires et des pieces - Partie 4 : Exigences de productionBahnanwendungen - Schweißen von Schienenfahrzeugen und -fahrzeugteilen - Teil 4: HerstellungsanforderungenTa slovenski standard je istoveten z:EN 15085-4:2007SIST EN 15085-4:2008en,fr,de45.060.0125.160.01ICS:SLOVENSKI
STANDARDSIST EN 15085-4:200801-april-2008

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15085-4October 2007ICS 45.060.01; 25.160.10 English VersionRailway applications - Welding of railway vehicles andcomponents - Part 4: Production requirementsApplications ferroviaires - Soudage des véhicules et descomposants ferroviaires - Partie 4: Exigences deproductionBahnanwendungen - Schweißen von Schienenfahrzeugenund -fahrzeugteilen - Teil 4: FertigungsanforderungenThis European Standard was approved by CEN on 18 August 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15085-4:2007: E

Introduction Welding is a special process in the manufacture of railway vehicles and their parts. The required provisions for this process are laid down in the standards series EN ISO 3834. The basis of these provisions are the basic technical welding standards in respect of the special requirements for the construction of railway vehicles. This standard is aimed at defining the terms of enforcement applicable to European Standards, it should not be construed as a substitute to these standards. This standard can also be used by internal and external parties, including certification bodies, to assess the organisation's ability to meet customer, regulatory and the organisation's own requirements.

1 Scope This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts. This part of the series describes the production requirements (i.e. preparation and execution) of the welding work. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 287-1, Qualification test of welders – Fusion welding – Part 1: Steels EN 1011 (all parts), Welding – Recommendations for welding of metallic materials EN 10204:2004, Metallic products – Types of inspection documents EN 13479, Welding consumables – General product standard for filler metals and fluxes for fusion welding of metallic materials EN 15085-1:2007, Railway applications - Welding of railway vehicles and components - Part 1: General EN 15085-3:2007, Railway applications – Welding of railway vehicles and components – Part 3: Design requirements EN ISO 544, Welding consumables - Technical delivery conditions for welding filler materials - Type of product, dimensions, tolerances and markings (ISO 544:2003) EN ISO 4063:2000, Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:1998) EN ISO 9013:2002, Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2002) EN ISO 9606-2, Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) EN ISO 9606-3, Approval testing of welders - Fusion welding - Part 3: Copper and copper alloys (ISO 9606-3:1999) EN ISO 9606-4, Approval testing of welders - Fusion welding - Part 4: Nickel and nickel alloys (ISO 9606-4:1999) EN ISO 9606-5, Approval testing of welders - Fusion welding - Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000) EN ISO 14555, Welding - Arc stud welding of metallic materials (ISO 14555:2006) CEN ISO/TR 15608:2005, Welding - Guidelines for a metallic materials grouping system (ISO/TR 15608:2005)

Specification and qualification of welding procedures for metallic materials – Welding procedure test EN ISO 15620, Welding - Friction welding of metallic materials (ISO 15620:2000) EN ISO 17652-1, Welding - Test for shop primers in relation to welding and allied processes - Part 1: General requirements (ISO 17652-1:2003) EN ISO 17652-2, Welding - Test for shop primers in relation to welding and allied processes - Part 2: Welding properties of shop primers (ISO 17652-2:2003) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 15085-1:2007 apply. 4 Preparation before welding 4.1 Welding planning documents 4.1.1 General Welding planning documents shall be prepared by the manufacturers with the assistance of the recognised welding coordinator Level A for new and converted vehicles and maintenance of rail vehicles (see EN 15085-2). Type, scope and time of the submission and inspection should be agreed between customer and manufacturer. Welding planning documents may include working plans, welding sequence plans, test planning documents and welding procedure specifications. 4.1.2 Working plans For the production of railway vehicles it is necessary to have working plans for the following sub-assemblies:  bogie (sub-assemblies, assembly);
1) For railway applications, only EN ISO 15614-1, EN ISO 15614-2, prEN ISO 15614-3, EN ISO 15614-4, EN ISO 15614-7, EN ISO 15614-11, EN ISO 15614-12 and EN ISO 15614-13 are relevant.

Evidence according to any of the following standards: EN ISO 15613, EN ISO 14555, EN ISO 15620; if necessary for component or the material: EN ISO 15614.  Weld performance class CP C3: Evidence according to any of the following standards: EN ISO 15610, EN ISO 15611, EN ISO 15612, EN ISO 15613, EN ISO 14555, EN ISO 15620; if necessary for component or the material: EN ISO 15614.  Weld performance class CP D: According to the requirements of the customer. In general, every WPS shall be covered by a WPQR, except for weld performance class CP D unless specified in the contract.
2) See footnote 1).
...