CEN/TC 256/WG 31 - Welding of railway vehicules and components

This document defines the classification levels for welded components, the types of activity typically undertaken and the requirements to be fulfilled to demonstrate conformance.

This document defines terms in the field of welding on railway vehicles and associated components. This document is applicable to all assemblies, sub-assemblies or parts welded by any welding process, either manual, partly mechanized, fully mechanized or automatic welding as defined in EN ISO 4063.

This document applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their components.
This document specifies applicable design and classification rules.
This document does not define parameters for the dimensioning.
NOTE   Requirements on structures can be found in other standards like EN 12663.

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts.
This part of the series defines the classification levels as well as the requirements for manufacturers of welded railway vehicles and components.
This part of the series specifies:
- inspections and testing to be executed on the welds;
- destructive as well as non-destructive tests to be performed;
- necessary documentation to issue to declare the conformity of the products.

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts.
This part of the series describes the production requirements (i.e. preparation and execution) of the welding work.

This document defines the quality requirements as well as the design and production requirements for welding to be followed by manufacturers during maintenance or maintenance activities on railway vehicles and components.

This document defines the classification levels for welded components, the types of activity typically undertaken and the requirements to be fulfilled to demonstrate conformance.

This document defines the classification levels for welded components, the types of activity typically undertaken and the requirements to be fulfilled to demonstrate conformance.

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts.
With respect to the railway environment, this series of standards defines the certification and quality requirements for the welding manufacturer to undertake new building and repair work. It then provides an essential link between performance requirements defined during design, and achieves appropriate quality welds during production and the demonstration of the required quality by inspection.
This link is achieved by defining a weld performance class during design, which is based on safety and stress factors relevant to railway operation. Quality levels of imperfections are assigned to weld performance classes to ensure a certain level of performance intended during design. Based on these weld performance classes, certification levels for production as well as inspection and testing and qualifications for welding personnel of the manufacturer are specified.
This standard deals with welding steel and aluminium alloys including castings.
NOTE   The principle of this standard may also be applied for welding of other parent materials (e.g. Cu, Mg).
This part of the series provides general recommendations and definitions for welding railway vehicles and associated components. Except for specific provisions which are laid down contractually, this standard applies to all assemblies, sub-assemblies or parts welded by any welding process, either manual, partly mechanized, fully mechanized or automatic welding as defined in EN ISO 4063.
This series of standards does not deal with product qualification.
Items of equipment subject to specific regulations are not relevant to the scope of this series of standards, e.g. air reservoirs according to EN 286-3 and EN 286-4.

This document applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their components.
This document specifies applicable design and classification rules.
This document does not define parameters for the dimensioning.
NOTE   Requirements on structures can be found in other standards like EN 12663.

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts.
This part of the series specifies:
-   inspections and testing to be executed on the welds;
-   destructive as well as non-destructive tests to be performed;
-               necessary documentation to issue to declare the conformity of the products.

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts.
This part of the series describes the production requirements (i.e. preparation and execution) of the welding work.

TC - Editorial correction brought to the last two pages of Table B.1 in the E mother reference version only.
2013: Originator of XML version: first setup pilot of CCMC in 2012

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts.
This part of the series specifies design and classification rules applicable to the manufacture and maintenance of railway vehicles and their parts. Upon agreement with the customer, drawings issued prior to this European Standard may be subject to the provisions of this European Standard.
This European Standard does not define parameters for the dimensioning (refer to other standards e.g. on fatigue testing).

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts.
This part of the series defines the certification levels as well as the requirements for welding manufacturers and describes the procedure for the recognition of welding manufacturers.

This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts.
With respect to the railway environment, this series of standards defines the certification and quality requirements for the welding manufacturer to undertake new building and repair work. It then provides an essential link between performance requirements defined during design, and achieves appropriate quality welds during production and the demonstration of the required quality by inspection.
This link is achieved by defining a weld performance class during design, which is based on safety and stress factors relevant to railway operation. Quality levels of imperfections are assigned to weld performance classes to ensure a certain level of performance intended during design. Based on these weld performance classes, certification levels for production as well as inspection and testing and qualifications for welding personnel of the manufacturer are specified.
This standard deals with welding steel and aluminium alloys including castings.
NOTE   The principle of this standard may also be applied for welding of other parent materials (e.g. Cu, Mg).
This part of the series provides general recommendations and definitions for welding railway vehicles and associated components. Except for specific provisions which are laid down contractually, this standard applies to all assemblies, sub-assemblies or parts welded by any welding process, either manual, partly mechanized, fully mechanized or automatic welding as defined in EN ISO 4063.
This series of standards does not deal with product qualification.
Items of equipment subject to specific regulations are not relevant to the scope of this series of standards, e.g. air reservoirs according to EN 286-3 and EN 286-4.