EN 15085-1:2007
(Main)Railway applications - Welding of railway vehicles and components - Part 1: General
Railway applications - Welding of railway vehicles and components - Part 1: General
This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts.
With respect to the railway environment, this series of standards defines the certification and quality requirements for the welding manufacturer to undertake new building and repair work. It then provides an essential link between performance requirements defined during design, and achieves appropriate quality welds during production and the demonstration of the required quality by inspection.
This link is achieved by defining a weld performance class during design, which is based on safety and stress factors relevant to railway operation. Quality levels of imperfections are assigned to weld performance classes to ensure a certain level of performance intended during design. Based on these weld performance classes, certification levels for production as well as inspection and testing and qualifications for welding personnel of the manufacturer are specified.
This standard deals with welding steel and aluminium alloys including castings.
NOTE The principle of this standard may also be applied for welding of other parent materials (e.g. Cu, Mg).
This part of the series provides general recommendations and definitions for welding railway vehicles and associated components. Except for specific provisions which are laid down contractually, this standard applies to all assemblies, sub-assemblies or parts welded by any welding process, either manual, partly mechanized, fully mechanized or automatic welding as defined in EN ISO 4063.
This series of standards does not deal with product qualification.
Items of equipment subject to specific regulations are not relevant to the scope of this series of standards, e.g. air reservoirs according to EN 286-3 and EN 286-4.
Bahnanwendungen - Schweißen von Schienenfahrzeugen und -fahrzeugteilen - Teil 1: Allgemeines
Diese Normenreihe gilt für das Schweißen metallischer Werkstoffe bei der Herstellung und Instandsetzung von Schienenfahrzeugen und fahrzeugteilen.
Mit Blick auf das Umfeld des Schienenverkehrs legt diese Normenreihe die Zertifizierung und die Qualitätsanforderungen an den Schweißbetrieb für die Neufertigung und Instandsetzung fest. Weiterhin stellt sie eine grundlegende Verbindung zwischen den von der Konstruktion festgelegten Güteanforderungen, der Erzielung der entsprechenden Schweißnahtgüte in der Fertigung und der Prüfung zum Nachweis der geforderten Güte her.
Diese Verbindung wird über die Festlegung von Schweißnahtgüteklassen während der Konstruktion, die auf den für den Bahnbetrieb wichtigen Sicherheits und Spannungsfaktoren basieren, erreicht. Den Schweißnaht¬güteklassen werden Bewertungsgruppen zugeordnet, um die von der Konstruktion angestrebten Güte¬anforderungen sicherzustellen. Auf der Grundlage der Schweißnahtgüteklassen werden Zertifizierungsstufen für die Fertigung sowie Prüfverfahren und Qualifizierung des Schweißpersonals festgelegt.
Diese Europäische Norm behandelt das Schweißen von Stählen und Aluminiumlegierungen, einschließlich Gusslegierungen.
ANMERKUNG Das Schweißen anderer Werkstoffe (z. B. Cu, Mg) ist nach den anwendbaren Teilen dieser Europäischen Norm auszuführen.
Dieser Teil der Normenreihe enthält allgemeine Empfehlungen und Definitionen für die schweißtechnische Fertigung von Schienenfahrzeugen und dazugehöriger Komponenten. Mit Ausnahme anderweitig vertraglich getroffener spezieller Festlegungen ist diese Europäische Norm auf alle Baugruppen und Unterbaugruppen anzuwenden, welche durch schweißtechnische Verfahren in manueller, teilweise oder vollständig mechanisierter oder automatisierter Anwendung nach EN ISO 4063 gefertigt werden.
Diese Europäische Norm behandelt keine Produktqualifizierung.
Applications ferroviaires - Soudage des véhicules ferroviaires et des pièces - Partie 1 : Généralités
La présente série de normes s'applique au soudage de matériaux métalliques au cours de la construction et de la maintenance des véhicules ferroviaires et de leurs composants.
Dans le respect de l’environnement ferroviaire, la présente série de normes définit les exigences de certification et de qualité pour le constructeur soudeur réalisant de nouvelles constructions ou des travaux de réparation. Elle fournit également un lien fondamental entre les exigences de performance définies à la conception, et elle permet la réalisation de soudures de la qualité appropriée lors de la production et la démonstration par contrôle de la qualité exigée.
La présente norme traite du soudage de l’acier et des alliages d’aluminium y compris les pièces moulées.
NOTE Le principe de cette norme peut aussi s’appliquer au soudage d’autres matériaux de base (par exemple, Cu, Mg).
La présente partie de norme donne des recommandations et définitions générales concernant le soudage sur les véhicules et les composants ferroviaires. A l’exception de dispositions spécifiques fixées par contrat, la présente norme s'applique à tous les ensembles, sous-ensembles ou pièces soudés, quel que soit le procédé de soudage, manuel, partiellement mécanisé, complètement mécanisé ou automatique, selon les définitions données par l’EN ISO 4063.
La présente série de normes ne traite pas de la qualification des produits.
Les éléments d'équipement soumis à une réglementation spécifique ne relèvent pas du domaine de la présente norme, par exemple les réservoirs d'air conformes à l’EN 286-3 et à l’EN 286-4.
Železniške naprave - Varjenje železniških vozil in elementov - 1. del: Splošno
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Railway applications - Welding of railway vehicles and components - Part 1: GeneralŽelezniške naprave - Varjenje železniških vozil in elementov - 1. del: SplošnoApplications ferroviaires - Soudage des véhicules ferroviaires et des pieces - Partie 1 : GénéralitésBahnanwendungen - Schweißen von Schienenfahrzeugen und -fahrzeugteilen - Teil 1: AllgemeinesTa slovenski standard je istoveten z:EN 15085-1:2007SIST EN 15085-1:2008en,fr,de45.060.0125.160.10ICS:SLOVENSKI
STANDARDSIST EN 15085-1:200801-april-2008
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15085-1October 2007ICS 25.160.10; 45.060.01 English VersionRailway applications - Welding of railway vehicles andcomponents - Part 1: GeneralApplications ferroviaires - Soudage des véhiculesferroviaires et des pièces - Partie 1 : GénéralitésBahnanwendungen - Schweißen von Schienenfahrzeugenund -fahrzeugteilen - Teil 1: AllgemeinesThis European Standard was approved by CEN on 26 August 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15085-1:2007: E
Welding manufacturer certification.9 Bibliography.10
This series of European Standards EN 15085 "Railway applications – Welding of railway vehicles and components" consists of the following parts: Part 1: General Part 2: Quality requirements and certification of welding manufacturer Part 3: Design requirements Part 4: Production requirements Part 5: Inspection, testing and documentation Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
1 Scope This series of standards applies to welding of metallic materials in the manufacture and maintenance of railway vehicles and their parts. With respect to the railway environment, this series of standards defines the certification and quality requirements for the welding manufacturer to undertake new building and repair work. It then provides an essential link between performance requirements defined during design, and achieves appropriate quality welds during production and the demonstration of the required quality by inspection. This link is achieved by defining a weld performance class during design, which is based on safety and stress factors relevant to railway operation. Quality levels of imperfections are assigned to weld performance classes to ensure a certain level of performance intended during design. Based on these weld performance classes, certification levels for production as well as inspection and testing and qualifications for welding personnel of the manufacturer are specified. This standard deals with welding steel and aluminium alloys including castings. NOTE The principle of this standard may also be applied for welding of other parent materials (e.g. Cu, Mg). This part of the series provides general recommendations and definitions for welding railway vehicles and associated components. Except for specific provisions which are laid down contractually, this standard applies to all assemblies, sub-assemblies or parts welded by any welding process, either manual, partly mechanized, fully mechanized or automatic welding as defined in EN ISO 4063. This series of standards does not deal with product qualification. Items of equipment subject to specific regulations are not relevant to the scope of this series of standards, e.g. air reservoirs according t
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.