CEN/TC 337 - Winter maintenance and road service area maintenance equipment

This document specifies the terminology and performance requirements for all sensor components of stationary equipment within a Road Weather Information System (RWIS).

This document specifies the test methods, the experimental set-up and result analysis for the laboratory qualification of stationary equipment within a RWIS.

This document specifies the essential requirements of stationary systems for production of brines for winter road maintenance and includes tests of these requirements. Installation boundary: chloride and water inlet to the saturator, brine outlet to the spreading machine. Within the scope are materials, brine storage and brine loading/unloading equipment also. Mobile systems for production of brines in situ are not content of this document.
The following points are not covered by this document:
-   System and construction requirements;
-   Requirements according to national and European legislations.

This document specifies the requirements on design and construction of bulk spreaders and sprayers, trailer spreaders and towed spreaders with speed related spreading for winter service. This document also deals with information about the minimum content required for operating manuals.
The document is valid for machines, which are used to spread the following spreading agents:
-   not pre-wetted and pre-wetted spreading agents;
-   abrasive spreading agents;
-   liquid spreading agents (brine).
This document is not applicable to:
-   requirements for registration and approval;
-   requirements made by automobile manufacturers;
-   requirements on safety, which are dealt with in FprEN 17106 1 and FprEN 17106 3 2.

This document gives the possibility to certify a model of vehicle-mounted or (trailer) dragged spreading machines for winter service with standard parameters, leaving the possibility to the manufacturer to evolve in performances. At the same time, information is given on the minimum content required for operating manuals.
This document is valid for machines which are used to spread the following media:
-   not pre-wetted spreading agent (solid spreading agent);
-   pre-wetted spreading agent;
-   liquid spreading agent (brine).
The following points are not covered by this document:
-   requirements for registration and approval;
-   requirements made by automobile manufacturers;
-   requirements on EN 15518 3.

This European Standard specifies the essential requirements of calcium chloride and magnesium chloride for spreading on roads for winter maintenance and includes tests of these requirements. The requirements are specified for calcium chloride and magnesium chloride in solid form and in water solution, which is delivered to the customer.

This European Standard specifies the essential requirements of sodium chloride (salt) for spreading on roads for winter maintenance and includes tests of these requirements. The requirements are specified for salt in crystallized form and for salt in solution (brine), which is delivered to the customer.

Same as in EN 15430-1:2007 + A1:2011

This European Standard specifies the accuracy of the performance measurement system of road service area maintenance equipment described in the scope of CEN/TC 337 and used for:
-   grass-cutting and brush-cutting;
-   mechanical plant-cutting.
This equipment is mounted on self-propelled carrying vehicles and is designed to cut and shred grass, brushwood, trees, saplings and bushes in road service areas.
This European Standard does not cover the collection and transportation of shredded grass.

This document defines the classification criteria of the road service area maintenance equipment described in the scope of EN 15436 1 and used for:
-   grass cutting and brush cutting;
-   mechanical plant cutting.
This equipment is mounted on self-propelled carrying vehicles, and is intended, on the one hand, for cutting and shredding grass and brushwood, and, on the other hand, for trimming trees, saplings and bushes in road service areas. This document is intended to be used also in conjunction with FprEN 15436 2.

This Technical Specification defines general specifications and performance criteria of other solid and liquid de-icing agents than chlorides of sodium, calcium and magnesium, hereinafter referred to products, for the use in winter service on roads and on roads for specific uses, with the exception of runways and parking areas of aircrafts. It establishes the test methods to control them. The products include inorganic and organic de-icing agents, and mixtures of chlorides of sodium, calcium, magnesium and potassium with organic and inorganic components which are intended for special properties like inhibition of corrosion, enhanced melting capacity or improved spreading pattern.
NOTE   This Technical Specification defines specifications and performance criteria and offers for each a variation in the form of classes of requirements. This does not mean that there are products likely to respond to all the classes and criteria of the standard. Therefore, when defining the demand the user needs to make sure prior the appropriateness of his choice and the availability of suitable products.

This European Standard establishes a method to assess the PM10 and PM2,5 efficiency of road sweepers. PM10 and PM2,5 efficiency includes a sweeper’s ability to:
-   Remove and capture PM10 and PM2,5 particulate matter, and coarse size fractions, from typical urban road surfaces;
-   Minimize the amount of airborne and entrained PM10 and PM2,5 particulate matter resulting from the sweeping process.
The sweeper’s ability to remove and capture particulate matter and coarse size fractions is assessed using procedures and equipment to determine the amount of a test material (consisting of particulate matter and coarser size fractions) the sweeper is able to remove from a test surface during a controlled test run. This test measurement is used to calculate the removal efficiency for the sweeper.
The sweeper’s ability to minimize the amount of airborne and entrained particulate matter is also assessed using procedures and equipment to determine the airborne concentrations of PM10 and PM2,5 resulting from the sweeping of a test material (consisting of particulate matter and coarser size fractions) during a controlled test run. The test measurements are used to calculate PM10 and PM2,5 emission ratings for the sweeper.
This test allows the use of dust suppression water. Sweepers configured as flushing machines, or equipped with front-mounted spray bars which are not part of a dust suppression water system are not within the scope of this test.
The road sweeper’s performance results are reported in a quantitative numerical format that will allow comparative assessments of similarly classified sweepers. This test does not specify pass/fail criteria for the PM10 and PM2,5 efficiency measurements specified in the test procedure.
This test is applicable to truck mounted, self-propelled, towed and attached sweeping equipment as defined in EN 15429-1:2007, Clause 2.
This test is a model/type test, requiring the sweeper being tested to be representative of all factory production of that particular sweeper model.

This European Standard applies to surface cleaning machines for outdoor applications in public areas, roads, airports and industrial complexes. Cleaning machines for winter maintenance and/or indoor applications are not included within the scope of this European Standard. Surface cleaning machines in terms of this standard, are self-propelled, truck mounted, attached sweeping equipment or pedestrian controlled as disclosed in EN 15429-1.
Surface cleaning machines by way of their function, have specialized equipment necessary to perform their task.
This European Standard deals with graphical symbols uniquely used to indicate the function and status of operator controls and tell-tale displays of the specialized equipment.
Common symbols that are included in other standards and applied to a wider range of machines are not included. Typically, symbols in this category that may equally be applied to surface cleaning machines can be found in ISO 2575 Road vehicles – Symbols for controls, indicators and tell-tales, and ISO 6405 Earth moving machinery – Symbols for operator and other displays – Part 1: Common Symbols.
This European Standard does not apply to machines or components that are specifically designed for cleaning tramlines and rail tracks.
Industrial sweepers, within the scope of EN 60335-2-72 are excluded from this European Standard.
This European Standard applies to machines manufactured after the approval date of the standard by CEN.

This European Standard applies to power systems equipped for operation and to drive implements and attachments such as hydraulic driven front sweepers, mowers or suction sweepers on winter service vehicles or road service vehicles equipped with front-mounting plates according to EN 15432.
The purpose of this standard is to ensure interchangeability of vehicles and implements. The minimum requirements on the performance and the components of the hydraulic system, as well as the kind and the size of the connecting elements between the vehicle and the implement, are specified in the standard.
Clause 3 of this standard does not cover applications where the implements need a continuous hydraulic oil flow less than 45 l/ min.
Clause 4 is dealing with the electrical connection between vehicle and implement to drive an electrically driven hydraulic pump, used in trucks without hydraulic systems.
Clause 5 is dealing with a universal electrical connection used for front mounted mowers, spreaders and other road service area equipment with the following functions: power supply and transmitting CAN BUS signals.

This document applies to surface cleaning machines for outdoor applications in public areas, roads, airports and industrial complexes. Cleaning machines for winter maintenance and/or indoor applications are not included within the scope of this European Standard. Surface cleaning machines in terms of this standard, are self-propelled, truck mounted, attached sweeping equipment or pedestrian controlled.
This standard deals with the performance and functional characteristics and the test methods applied to the sweeping equipment when used as intended and under the conditions foreseen by the manufacturer.
This document does not include carrier vehicles (e.g. trucks). These are covered in national or EU Directives for vehicles.
This document does not apply to road surface cleaning equipment that would be front mounted on tractors according to EN 13524, or other vehicles.
This standard does not apply to machines or components that are specifically designed for cleaning tramlines and rail tracks.
This standard does not cover noise emission or any overload protection as these are covered by regulatory requirements.
Industrial sweepers, within the scope of EN 60335-2-72 are excluded from this standard.

This European Standard specifies the requirements for elements mounted to carrying vehicles to ensure interchangeability between a vehicle and different equipments that are to be mounted frontally. It specifies certain interchangeability dimensions of the front mounting plate as well as the locations of coupling devices for electrical and hydraulic connections.
This European Standard specifies a mounting plate in order to cover road vehicles having a maximum total mass of up to 6,0 tons (commercial vehicles, multi purpose vehicles, communal vehicles, …) which are capable of carrying front mounted equipments for winter maintenance and for road service area maintenance. The mounting plate is designed to allow quick and easy changing of carrying vehicle equipments. Mounting or demounting of front-mounted equipments is generally effectuated by one person using conventional tools (mobile or fixed) prior to securing of the front-mounted equipment (by e.g. bolts or hydraulic element).
This European Standard does not specify vehicle-side lifting systems or receiving devices for mounting plate (device side).
The vehicle body guidelines from the vehicle manufacturer should be adhered to when performing any modifications to the vehicle.
This European Standard specifies, with regard to electrical and hydraulic connections, only location areas and clearance spaces in order to ensure interchangeability.

This European Standard specifies requirements for snow removal machines with rotating tools for winter application on traffic areas. It is valid for design and construction. It also includes the minimum requirement concerning contents of the operating instructions.
This European Standard applies to:
   snow blowers;
   snow cutters;
   snow cutter blowers;
and related products such as side blowers, side cutters, etc.
This European Standard does not apply for:
   requirements for registration and approval;
   vehicle manufacturer requirements;
   safety requirements.

This document is valid for snow ploughs designed to be fitted to winter maintenance vehicles on their front-mounting plates according to EN 15432 and also for side-mounted snow ploughs.
Requirements regarding the testing of override security systems and/or bump security systems of front-mounted or side-mounted snow ploughs for winter service are determined by this document. This document is meant to assess the demands made on snow ploughs operated in traffic.
The document is valid for:
-   single-side snow ploughs;
-   variable V-ploughs.
The following points are not standardized by this document:
-   V-shaped snow ploughs;
-   requirements for registration and approval;
-   requirements made by carrier vehicle manufacturers;
-   requirements on safety – these are dealt with in EN 13021.

This European Standard specifies the requirements for the various elements of carrying vehicles to ensure interchangeability between a vehicle and different equipments that are to be mounted frontally. It specifies certain interchangeability dimensions of the front mounting plate, including its height above the ground, as well as the locations of coupling devices for electrical and hydraulic connections and for mechanical power take off (PTO).
This European Standard specifies three different classes of mounting plates in order to cover road vehicles, independently from vehicle category and maximum permissible load, of the greatest possible variety (commercial vehicles, multi purpose vehicles, communal vehicles,...) which are capable of carrying front mounted equipments for winter maintenance and for road service area maintenance.
This European Standard specifies, with regard to electrical and hydraulic connections and to PTO, only location areas, clearance spaces and preferred layout in order to ensure interchangeability. Requirements applying to connectors, coupling devices and PTO splines are given in EN 15431.
Normative Annex A specifies provisions for an advanced front coupling system that is able to allow for mounting and demounting equipments without the use of tools. Users having to address specific needs (e.g. extreme weather conditions) may require the vehicle be fitted with such automatic coupling system.
Normative Annex B gives provisions for a compact and light front mounting plate intended for combined road and off road applications.

This European Standard specifies the frequency, resolution and content of road weather observation and forecast products for a Road Weather Information Systems (RWIS).

This European Standard defines the "Road Weather Information Systems" (RWIS) concept for public roads and traffic surfaces.
This standard applies to the acquisition of data on weather-related road and environment conditions as well as their forecast.
This information is typically used for road maintenance and can serve other systems like traffic management, road users information, data models, etc.

This Technical Specification is a product specification standard. It applies to bulk spreadable products for absorbing hydrocarbons, mineral oils and similar liquids from road surfaces or traffic areas. Each country may add usage regulations.

This standard applies to:
-   mowers;
and
-   mechanical brush cutters;
used by road maintenance services.
The standard provides harmonised expressions/characteristic parameters by means of which operators can specify the above-mentioned equipment's performance to suppliers.
The standard also describes procedures for testing delivered equipment's compliance with operator requirements.

This document is valid for snow ploughs designed to be fitted to winter maintenance vehicles, on their frontmounting
plates according to EN 15432 and also for side-mounted snow ploughs.
Demands on design and construction of front-mounted or side-mounted snow ploughs for winter service are
determined by this document. This document is meant to assess the demands made on snow ploughs
operated in traffic.
The document is valid for:
single-side snow ploughs;
variable V-ploughs.
The following points are not standardized by this document:
v-shaped snow ploughs;
requirements for registration and approval;
requirements made by carrier vehicle manufacturers;
requirements on safety these are dealt with in EN 13021.

This European Standard defines terms for road service area maintenance equipment described in the scope of CEN/TC 337, i.e.:
-   grass cutting, brushcutting;
-   mechanical cutting of plants.
This European Standard does not deal with the collection of plants or their transport.

This document applies to power systems equipped for the operation and able to drive implements and attachments such as snow ploughs and/or spreaders on winter service vehicles or mowers on road service area maintenance vehicles, equipped with front-mounting plates according to prEN 15432.
The purpose of this standard is to ensure interchangeability of vehicles and implements. The minimum requirements on the performance and the components of the hydraulic system as well as the kind, the size and the location of the connecting elements between the vehicle and the implement are specified in this standard.
This standard does not deal with airport equipment.
This standard does not cover applications, where the implements need a continuous hydraulic oil flow exceeding 45 l/min.

This document applies to surface cleaning machines for outdoor applications on public areas, roads, airports and industrial plants. Cleaning machines for winter maintenance or indoor applications are not under the scope of this European Standard. Surface cleaning machines in terms of this Standard are self propelled, truck mounted, attached sweeping equipment or pedestrian controlled.
This document deals with the classification of sweeping equipment and its performance specifications when they are used as intended and under the conditions foreseen by the manufacturer.
This document does not include the carrier vehicles (e.g. truck). These will be handled in national or EC Directives for vehicles.
This document does not apply to road surface cleaning machines such as front mounted on tractors according to EN 13524, or other vehicles.
This document does not apply to machines or components that are specifically designed for cleaning tram lines and rail tracks.
This document applies to machines that are manufactured after the date of approval of this standard by CEN.
Industrial sweepers within the scope of EN 60335-2-72 are excluded.

This standard constitutes a compilation of technical terms and definitions related to winter maintenance equipment.

This document specifies a standardized protocol for downloading data from the equipment control box to an in vehicle board computer to ensure interchangeability between a vehicle and different equipment that the same vehicle can carry.
It specifies the interface connection as well as variables, records and reports which permit standardized protocol to cover applications with the greatest possible variety of equipment for performing winter maintenance and road service area maintenance.

This document applies to surface cleaning machines for outdoor applications in public areas, roads, airports and industrial complexes. Cleaning machines for winter maintenance and/or indoor applications are not included within the scope of this European Standard. Surface cleaning machines in terms of this standard, are self-propelled, truck mounted, attached sweeping equipment or pedestrian controlled.
This standard deals with the performance characteristics and the test methods applied to the sweeping equipment when used as intended and under the conditions foreseen by the manufacturer.
This document does not include carrier vehicles (e.g. trucks). These are covered in national or EC Directives for vehicles.
This document does not apply to road surface cleaning equipment that would be front mounted on tractors according to prEN 13524, or other vehicles.
This standard does not apply to machines or components that are specifically designed for cleaning tramlines and rail tracks.
This standard does not cover noise emission or any overload protection as these are covered by regulatory requirements.
This standard applies to machines manufactured after the approval date of the standard by CEN.
Industrial sweepers, within the scope of EN 60335-2-72 are excluded from this standard.

This European Standard specifies a standardized protocol for downloading data from the equipment control box to an in vehicle board computer to ensure interchangeability between a vehicle and different equipments that the same vehicle can carry.
It specifies the interface connection as well as variables, records and reports which permit standardized protocol to cover applications with the greatest possible variety of equipments for performing winter maintenance and road service area maintenance.

The function of the standard is to combine any vehicle equipment with different board computers to any client application server. The communication interface on vehicle is defined by Part 1 of EN 15430. The interface between the information supplier server and the client application server is defined as a specific protocol (flow 3) object of this document. This makes interchangeability possible on both sides of the communication without any restriction in the range of communication technology including memory card, WLAN, GPRS or any other communication media.

This document applies to bulk spreadable products for absorbing hydrocarbons, mineral oils and similar liquids from road surfaces or traffic areas.

This European Standard specifies the terminology and performance requirements for all components of stationary equipment within a Road Weather Information Systems (RWIS).

This Technical Specification specifies the test methods, the experimental set-up and result analysis for the laboratory qualification of stationary equipment within a RWIS.

The function of this Technical Specification is to combine any vehicle equipment with different board computers to any client application server. The communication interface on vehicle is defined by EN 15430-1:2007+A1:2011. The interface between the information supplier server and the client application server is defined as a specific protocol (flow 3), object of the present Technical Specification. This makes interchangeability possible on both sides of the communication without any restriction in the range of communication technology including memory card, WLAN, GPRS or any other communication media.

Demands on design and construction of bulk spreaders, trailer spreaders and towed spreaders with speed related spreading for winter service are determined by this document. At the same time, information is given on the minimum content required for operating manuals.
The standard is valid for machines which are used to spread the following media:
a)   spreading agents with or without pre-wetted agent;
b)   abrasive spreading agents;
c)   brine.
The following points are not covered by this standard:
-   requirements for registration and approval;
-   requirements made by automobile manufacturers;
-   requirements on safety – these are dealt with in EN 13021.

This Technical Specification gives the possibility to certify a model of vehicle-mounted or (trailer-)dragged spreading machines for winter service with standard parameters, leaving the possibility for the manufacturer to evolve performance. At the same time, information is given on the minimum content required for operating manuals.
This Technical Specification is valid for machines which are used to spread the following media:
-   solid thawing media with or without pre-wetted media;
-   liquid thawing media.
The following points are not covered by this Technical Specification:
-   requirements for registration and approval;
-   requirements made by automobile manufacturers;
-   requirements on safety - these are dealt with in EN 13021.

This European Standard specifies a standardized protocol for downloading data from the equipment control box to an in vehicle board computer to ensure interchangeability between a vehicle and different equipments that the same vehicle can carry.
It specifies the interface connection as well as variables, records and reports which permit standardized protocol to cover applications with the greatest possible variety of equipments for performing winter maintenance and road service area maintenance.

This Technical Specification defines the classification criteria of the road service area maintenance equipment described in the scope of EN 15436-1 and used for:
- grass cutting and brushcutting;
- mechanical plant cutting.
This equipment is mounted on self-propelled carrying vehicles and is intended, on the one hand, for cutting and shredding grass and brushwood, and, on the other hand, for trimming trees, saplings and bushes in road service areas.

This European Standard specifies the accuracy of the performance measurement system of road service area maintenance equipment described in the scope of CEN/TC 337 and used for:
   grass-cutting and brush-cutting;
   mechanical plant-cutting.
This equipment is mounted on self-propelled carrying vehicles and is designed to cut and shred grass, brushwood, trees, saplings and bushes in road service areas.
This European Standard does not cover the collection and transportation of shredded grass.

TC - Correction of Figure 3 in 3.1.5 in the three language versions.

This European Standard specifies the requirements for the various elements of carrying vehicles to ensure interchangeability between a vehicle and different equipments that are frontally mounted. It specifies certain interchangeability dimensions of the front mounting plate, including its height above the ground, as well as the locations of coupling devices for electrical and hydraulic connections and for mechanical power take off (PTO).
This European Standard specifies two different classes of mounting plates in order to cover road vehicles, having a maximum design total mass higher than 3,5 t, of the greatest possible variety (commercial vehicles, multi purpose vehicles, communal vehicles, …), which are capable of carrying front mounted equipments for winter maintenance and for road service area maintenance.
This European Standard specifies, with regard to electrical and hydraulic connections and to PTO, only location areas, clearance spaces and preferred layout in order to ensure interchangeability. Requirements applying to connectors, coupling devices and PTO splines are given in EN 15431.
Normative Annex A specifies provisions for an advanced front coupling system that is able to allow for mounting and demounting equipments without the use of tools. Users having to address specific needs (e.g. extreme weather conditions) may require the vehicle be fitted with such automatic coupling system.
Normative Annex B gives provisions for a compact and light front mounting plate intended for combined road and off road applications.

This European Standard specifies a standardized protocol for downloading data from the equipment control box to an in vehicle board computer to ensure interchangeability between a vehicle and different equipments that the same vehicle can carry.
It specifies the interface connection as well as variables, records and reports which permit standardized protocol to cover applications with the greatest possible variety of equipments for performing winter maintenance and road service area maintenance.