SIST EN 302 064-2 V1.1.1:2004
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive
- Abstract
Wireless video links for professional and semi-professional use.
- Status
- Published
- Publication Date
- 30-Sep-2004
- Technical Committee
- RES - Radio equipment and systems
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Oct-2004
- Due Date
- 01-Oct-2004
- Completion Date
- 01-Oct-2004
- Directive
- 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/ECOJ Ref: DATUM UMIKA 15.11.2026 Conflicting Date: 15-Nov-2026
- Mandate
- M/284
SIST EN 302 064-2 V1.1.1:2004 is an ETSI harmonized European standard, transposed by SIST, for Electromagnetic compatibility and Radio spectrum Matters (ERM) and Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz band. It specifies the radio-spectrum requirements and the compliance tests for terrestrial wireless digital video link equipment used under article 3.2 of the R&TTE Directive.
What does SIST EN 302 064-2 V1.1.1:2004 specify?
SIST EN 302 064-2 V1.1.1:2004 covers the minimum technical characteristics for wireless video links so they use spectrum efficiently and avoid harmful interference. It applies to terrestrial wireless digital video link equipment above 1,3 GHz, and it allows digital modulation as long as the modulated signal stays within the stated limits.
The scope is written for professional and semi-professional use, with user categories ranging from broadcasters and programme-makers to industrial and consumer users. It also sets presentation rules for equipment submitted for testing, which matters because the same device must be configured consistently when labs check conformance.
| Annex | What it covers |
|---|---|
| Annex A | EN Requirements Table (EN-RT) for conformity assessment |
| Annex B | Bibliography |
| Annex C | EN title in the official languages |
The document is organized into scope, references, definitions/symbols/abbreviations, technical requirements, and testing for compliance. Clause 4 states the requirements, clause 5 states how to test them, and Annex A turns those requirements into a conformity checklist.
What are the key requirements of SIST EN 302 064-2 V1.1.1:2004?
SIST EN 302 064-2 V1.1.1:2004 focuses on four mandatory radio requirements: transmitter rated output power, transmitter channel bandwidth, transmitter spurious emissions, and receiver spurious emissions. In practice, a supplier must be able to measure these items and show that the results stay within the limits taken from EN 302 064-1.
Environmental profile
Clause 4.1 says the technical requirements apply within the equipment’s environmental profile, determined by its environmental class. That means the device must keep meeting the radio requirements across the specified operating conditions, not only in a laboratory-friendly setup.
Transmitter requirements
Clause 4.2 covers the transmitter. Rated output power, channel bandwidth, and spurious emissions are each defined by reference to EN 302 064-1, with limits also taken from that part, and conformity is checked by the test suites in clause 5.3.1. For users, this means the transmitter must stay inside its intended power and bandwidth behavior and must not radiate unwanted signals beyond the allowed level.
Receiver requirement
Clause 4.3 covers receiver spurious emissions. The receiver must meet the limit from EN 302 064-1 and pass the test in clause 5.3.2.1, which matters because receivers can also create unwanted emissions that affect other radio systems.
Testing and measurement
Clause 5.1 points testers to the environmental conditions and procedures in EN 302 064-1, and clause 5.2 requires the test report to include measurement uncertainty. The uncertainty values follow ETSI TR 100 028, so labs need to document how close each result is to the limit, not just the measured value.
Conformity structure
Annex A lists the EN Requirements Table (EN-RT) and marks all four EN-Rs as mandatory. That gives conformity assessors a simple checklist for static assessment of an equipment type.
What terms does SIST EN 302 064-2 V1.1.1:2004 define?
ERM means Electromagnetic compatibility and Radio spectrum Matters, the ETSI area covering radio spectrum use and related compatibility issues.
WVL means Wireless Video Links, the equipment family covered by this standard.
R&TTE Directive is the European directive for radio equipment and telecommunications terminal equipment whose article 3.2 is addressed here.
Environmental profile is the operating condition set for the equipment, based on its environmental class, under which the requirements must still be met.
Rated output power is the transmitter power parameter used to show the equipment stays within its permitted radiating level.
Channel bandwidth is the occupied channel width used to judge how much spectrum the equipment uses.
Spurious emissions are unwanted emissions outside the intended transmission, checked for both transmitter and receiver behavior.
EN-RT means EN Requirements Table, the annex table that summarizes the conformity requirements and their mandatory status.
Who uses SIST EN 302 064-2 V1.1.1:2004?
Manufacturers and design teams use SIST EN 302 064-2 V1.1.1:2004 to set transmitter power, bandwidth, and spurious-emission targets for WVL products. Test laboratories use it to plan measurements, interpret uncertainty, and report compliance in the format expected for harmonized radio standards.
It is also relevant to broadcasters, programme-makers, professional users, industrial users, emergency services, utilities, consumer users, hobbyists, and amateur users, because the scope distinguishes equipment categories by intended use and channel-bandwidth class. Quality managers and buyers can use those categories to decide whether a device is aimed at their application.
Which standards are used with SIST EN 302 064-2 V1.1.1:2004?
SIST EN 302 064-1 gives the technical characteristics, definitions, limits, and measurement methods that this part refers to for all of its radio requirements. ETSI TR 100 028 provides the method for handling measurement uncertainty in test reports.
Directive 1999/5/EC, the R&TTE Directive, is the legal framework for the harmonized status of the standard. Directive 98/34/EC appears in the foreword as the basis for the standardization mandate.
What does the SIST EN 302 064-2 V1.1.1:2004 document contain?
The document contains the requirement clauses, the related test suites, and the annexed EN-RT checklist used in conformity assessment. It also includes the reference model for measurement uncertainty, so test reports can be interpreted consistently.
Annex A gives a compact table linking each mandatory requirement to its clause reference. Annex B lists related documents, and Annex C records the title in official languages for publication and administrative use.
Get Certified
Connect with accredited certification bodies for this standard
ANCE
Mexican certification and testing association.
Intertek Slovenia
Intertek testing, inspection, and certification services in Slovenia.
LNE (Laboratoire National de Métrologie et d'Essais)
French national laboratory for metrology and testing.
Sponsored listings
Frequently Asked Questions
SIST EN 302 064-2 V1.1.1:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive". This standard covers: Wireless video links for professional and semi-professional use.
Wireless video links for professional and semi-professional use.
SIST EN 302 064-2 V1.1.1:2004 is classified under the following ICS (International Classification for Standards) categories: 33.100.01 - Electromagnetic compatibility in general; 33.160.40 - Video systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 302 064-2 V1.1.1:2004 is associated with the following European legislation: EU Directives/Regulations: 2014/53/EU, TRRTP124; Standardization Mandates: M/284. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 302 064-2 V1.1.1:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Electromagnetic compatibility and Radio spectrum Matters (ERM); Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive33.160.40Video sistemiVideo systems33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in generalICS:Ta slovenski standard je istoveten z:EN 302 064-2 Version 1.1.1SIST EN 302 064-2 V1.1.1:2004en01-oktober-2004SIST EN 302 064-2 V1.1.1:2004SLOVENSKI
STANDARD
ETSI ETSI EN 302 064-2 V1.1.1 (2004-04) 2
Reference DEN/ERM-TG17-001-2 Keywords radio, regulation, SHF, SRD, UHF, video ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2004. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 302 064-2 V1.1.1:2004
ETSI ETSI EN 302 064-2 V1.1.1 (2004-04) 3
Contents Intellectual Property Rights.4 Foreword.4 Introduction.5 1 Scope.7 2 References.8 3 Definitions, symbols and abbreviations.8 3.1 Definitions.8 3.2 Symbols.8 3.3 Abbreviations.8 4 Technical requirements specifications.9 4.1 Environmental profile.9 4.2 Transmitter requirements.9 4.2.1 Rated output power.9 4.2.1.1 Definition.9 4.2.1.2 Limit.9 4.2.1.3 Conformance.9 4.2.2 Channel bandwidth.9 4.2.2.1 Definition.9 4.2.2.2 Limit.9 4.2.2.3 Conformance.9 4.2.3 Spurious emissions.9 4.2.3.1 Definition.9 4.2.3.2 Limit.9 4.2.3.3 Conformance.9 4.3 Receiver requirements.10 4.3.1 Spurious emissions.10 4.3.1.1 Definition.10 4.3.1.2 Limit.10 4.3.1.3 Conformance.10 5 Testing for compliance with technical requirements.10 5.1 Environmental conditions for testing.10 5.2 Interpretation of the measurement results.10 5.3 Essential radio test suites.11 5.3.1 Transmitter test suites.11 5.3.1.1 Rated output power.11 5.3.1.2 Channel bandwidth.11 5.3.1.3 Spurious emissions.11 5.3.2 Receiver test suites.11 5.3.2.1 Spurious emissions.11 Annex A (normative): The EN Requirements Table (EN-RT).12 Annex B (informative): Bibliography.13 Annex C (informative): The EN title in the official languages.14 History.15
ETSI ETSI EN 302 064-2 V1.1.1 (2004-04) 4
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Candidate Harmonized European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Council Directive 98/34/EC [3] (as amended) laying down a procedure for the provision of information in the field of technical standards and regulations. The present document is intended to become a Harmonized Standard, the reference of which will be published in the Official Journal of the European Communities referencing the Directive 1999/5/EC [1] of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity ("the R&TTE Directive") [1]. Technical specifications relevant to Directive 1999/5/EC [1] are given in annex A. The present document is part 2 of a multipart deliverable covering the technical characteristics and methods for Wireless Video Links (WVL) operating in the 1,3 GHz to 50 GHz frequency band, as identified below: Part 1: "Technical characteristics and methods of measurement"; Part 2: "Harmonized EN under article 3.2 of the R&TTE Directive".
National transposition dates Date of adoption of this EN: 2 April 2004 Date of latest announcement of this EN (doa): 31 July 2004 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 January 2005 Date of withdrawal of any conflicting National Standard (dow): 31 January 2006
ETSI ETSI EN 302 064-2 V1.1.1 (2004-04) 5
Introduction The present document is part of a set of standards designed to fit in a modular structure to cover all radio and telecommunications terminal equipment under the R&TTE Directive [1]. Each standard is a module in the structure. The modular structure is shown in figure 1.
Use of spectrum * If needed Scoped by
equipment
class or type Scoped by frequency and/or equipment type Disability* Privacy* Fraud* No harm to the network* Emergency* Inter-working via
the network* Inter-working with the network Non-radio Radio (RE) Non-TTE TTE 3.1b 3.2 3.3c 3.3b 3.3a 3.3d 3.3e 3.3f Radio Product EMC Generic and product standards also notified under EMC Directive Standards also notified under LV Directive 3.1a New radio harmonized standards Spectrum EMC Safety - If needed, new standards for human exposure to Electromagnetic Fields, - if needed, new standards for acoustic safety EN 301 489 multi-part EMC standard
Figure 1: Modular structure for the various standards used under the R&TTE Directive SIST EN 302 064-2 V1.1.1:2004
ETSI ETSI EN 302 064-2 V1.1.1 (2004-04) 6
The left hand edge of the figure 1 shows the different clauses of article 3 of the R&TTE Directive [1]. For article 3.3 various horizontal boxes are shown. Dotted lines indicate that at the time of publication of the present document essential requirements in these areas have to be adopted by the Commission. If such essential requirements are adopted and as far and as long as they are applicable, they will justify individual standards whose scope is likely to be specified by function or interface type. The vertical boxes show the standards under article 3.2 for the use of the radio spectrum by radio equipment. The scopes of these standards are specified either by frequency (normally in the case where frequency bands are harmonized) or by radio equipment type. For article 3.1b the diagram shows EN 301 489, the multi-part product EMC standard for radio used under the EMC Directive. For article 3.1a the diagram shows the existing safety standards currently used under the LV Directive and new standards covering human exposure to electromagnetic fields. New standards covering acoustic safety may also be required. The bottom of the figure shows the relationship of the standards to radio equipment and telecommunications terminal equipme
...