iTeh Standards logo
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 8861:2000/AC:2000

(Amendment)

Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998)

Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998)

DIN - Several mistakes in German translation (No corresponding ISO corrigendum).

Schiffbau - Maschinenraum-Lüftung auf Schiffen mit Dieselmotoren-Antrieb - Grundlagen für Entwurf und Auslegung (ISO 8861:1998)

Construction navale - Ventilation du compartiment machines des navires a moteurs diesels - Exigences de conception et bases de calcul (ISO 8861:1998)

Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998)

General Information

Status
Published
Publication Date
30-Nov-2000
ICS
47.020.90 - Marine ventilation, air-conditioning and heating systems
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2000
Due Date
01-Dec-2000
Completion Date
01-Dec-2000
Ref Project
EN ISO 8861:1998/AC:1998 - Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998)

Relations

Corrects
SIST EN ISO 8861:2000 - Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998)
Effective Date
22-Dec-2008
SIST EN ISO 8861:2000/AC:2000SIST EN ISO 8861:2000/AC:2000
PreviousNext
Corrigendum
SIST EN ISO 8861:2000/AC:2000
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998)Schiffbau - Maschinenraum-Lüftung auf Schiffen mit Dieselmotoren-Antrieb - Grundlagen für Entwurf und Auslegung (ISO 8861:1998)Construction navale - Ventilation du compartiment machines des navires a moteurs diesels - Exigences de conception et
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

This May Also Interest You

SIST
SIST EN ISO 7547:2005(Main)
Ships and marine technology - Air-conditioning and ventilation of accommodation spaces - Design conditions and basis of calculations (ISO 7547:2002)
EN ISO 7547:2004
  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 9785:2004(Main)
Ships and marine technology - Ventilation of cargo spaces where vehicles with internal combustion engines are driven - Calculation of theoretical total airflow required (ISO 9785:2002)
EN ISO 9785:2002

This International Standard specifies methods of calculating the theoretical quantity of outdoor air required in cargo spaces of ships where vehicles with internal combustion engines are driven, in order to dilute the polluted air to within the permitted occupational exposure limits.
Annex A specifies average values of the amounts of pollutants in exhaust gases from vehicles with internal combustion engines driven in cargo spaces in ships.
Annex B gives general information and guidance as to good practice for the ventilation of cargo spaces in ships where vehicles with internal combustion engines may be driven.
Users of this International Standard should note that, while observing the requirements of the standard, they should at the same time ensure compliance with such statutory requirements, rules, and regulations as may be applicable to the individual ship concerned. Users should also refer to guidelines developed by the International Maritime Organization (IMO) contained in the Maritime Safety Committee Circular 729 (MSC Circ. 729), Guidelines and Recommendations for Ventilation systems in RO-RO Cargo Spaces.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 8861:2000(Main)
Shipbuilding - Engine-room ventilation in diesel-engined ships - Design requirements and basis of calculations (ISO 8861:1998)
EN ISO 8861:1998
  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 624:2011(Main)
Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats
EN 624:2011

This European standard specifies the characteristics of safety, construction, performance and efficiency, the test methods and marking, of room sealed space heating equipment of type C (see CEN/TR 1749) with combustion air intake and outlet for the products of combustion in the wall, roof or floor, combined or not. These are referred to in the body of the text as "heaters", burning LPG, for vehicles and boats.
This European standard only covers room sealed heaters also including those which have a combustion air fan, an integral hot air fan or both, only for vehicles and boats which are used for residential, recreational and commercial purposes.
This European standard applies to heaters which are installed either outside or inside the habitable volume, but which have a combustion circuit sealed from the vehicle's interior, and nominal heat input which does not exceed 10 kW (Hs) operated at supply pressure of 30 mbar, 28 mbar, 37 mbar and 50 mbar, using, where appropriate, 12 V or 24 V DC electrical supply.
Room sealed LPG space heating appliances for vehicles and boats are using very often warm air as a heat transfer medium. Annex B specifies additional requirements for appliances using water as a heat transfer medium.
For private cars and vehicles or boats used for the transport of dangerous goods or for commercial personnel transport additional requirements may be necessary.
This European standard does not cover requirements for storage water heaters (boilers) (see EN 15033). For appliances producing additional sanitary hot water (combi-boilers), see relevant clauses of EN 15033.
NOTE   If a LPG operated heater is installed in a motorized vehicle being subject to European road traffic legislation, the directives of the Council for the approximation of the laws, regulations and administrative provisions of the member states relating to the heating of the interior of motor vehicles should be applied.
These heaters are also suitable for caravan holiday homes.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 7547:2005/AC:2009(Corrigendum)
Ships and marine technology - Air-conditioning and ventilation of accommodation spaces - Design conditions and basis of calculations (ISO 7547:2002/Cor 1:2008)
EN ISO 7547:2004/AC:2009

TC - Technical modifications on the standard.

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 624:2002/oprA1:2005
Specification for dedicated LPG appliances - Room sealed LPG space heating equipment for installation in vehicles and boats - Amendment A1
EN 624:2000/prA1

Add as a new 3rd paragraph:
"Room sealed LPG space heating appliances for vehicles and boats are using very often warm air as a heat transfer medium. Annex B specifies additional requirements for appliances using water as a heat transfer medium."

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 2719:2026(Main)
Determination of flash point - Pensky-Martens closed cup method (ISO 2719:2025)
EN ISO 2719:2025

This document specifies three procedures, A, B and C, using the Pensky-Martens closed cup tester, for determining the flash point of combustible liquids, liquids with suspended solids, liquids that tend to form a surface film under the test conditions, biodiesel and other liquids in the temperature range of 40 °C to 370 °C.
NOTE 1        Although, technically, kerosene with a flash point above 40 °C can be tested using this document, it is standard practice to test kerosene according to ISO 13736.[5] Similarly, lubricating oils are normally tested according to ISO 2592.[2]
Procedure A is applicable to distillate fuels (diesel, biodiesel blends, heating oil and turbine fuels), new and in-use lubricating oils, paints and varnishes, and other homogeneous liquids not included in the scope of procedures B or C.
Procedure B is applicable to residual fuel oils, cutback residuals, used lubricating oils, mixtures of liquids with solids, and liquids that tend to form a surface film under test conditions or are of such kinematic viscosity that they are not uniformly heated under the stirring and heating conditions of procedure A.
Procedure C is applicable to fatty acid methyl esters (FAME) as specified in specifications such as EN 14214[11] or ASTM D6751.[13]
This document is not applicable to water-borne paints and varnishes.
NOTE 2        Water-borne paints and varnishes can be tested using ISO 3679.[3] Liquids containing traces of highly volatile materials can be tested using ISO 1523[1] or ISO 3679.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18862:2026(Main)
Coffee and coffee products - Determination of acrylamide - Methods using high-performance liquid chromatography with tandem mass spectrometric detection (HPLC-MS/MS) and gas chromatography with mass spectrometric detection (GC-MS) after derivatization (ISO 18862:2025)
EN ISO 18862:2025

This document specifies methods for the determination of acrylamide in coffee and coffee products by extraction with water, clean-up by solid-phase extraction (SPE) and determination by high-performance liquid chromatography with tandem mass spectrometric detection (HPLC-MS/MS) and gas chromatography with mass spectrometric detection (GC-MS) after derivatization. The methods were validated in a validation study for roasted coffee, soluble coffee, coffee substitutes and coffee products with ranges from 53 μg/kg to 612,1 μg/kg.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 18227:2026(Main)
Automotive fuels - E20 petrol - Requirements and test methods
CEN/TS 18227:2025

This document specifies requirements and test methods for E20 petrol marketed and delivered as such, containing a minimum oxygen content of 3,7 % (m/m) and a maximum of 8,0 % (m/m). The fuel has a maximum of 20,0 % (V/V) ethanol.
It is applicable to fuel for use in spark-ignition petrol-fuelled engines and vehicles.
This document is complementary to EN 228, which describes unleaded petrol containing an oxygen content up to 3,7 % (m/m) and a maximum ethanol content of 10 % (V/V).
NOTE 1   For general petrol engine vehicle warranty, E20 petrol might not be suitable for all vehicles and it is advised that the recommendations of the vehicle manufacturer are consulted before use. E20 petrol might need a validation step to confirm the compatibility of the fuel with the vehicle, which for some existing engines might still be needed.
NOTE 2   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction, µ, and the volume fraction, φ.

  • Technical specification
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80601-2-70:2026(Main)
Medical electrical equipment - Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment (ISO 80601-2-70:2025)
EN ISO 80601-2-70:2025

This document is applicable to the basic safety and essential performance of sleep apnoea breathing therapy equipment, hereafter referred to as ME equipment, intended to alleviate the symptoms of patients who suffer from obstructive sleep apnoea by delivering a therapeutic breathing pressure to the respiratory tract of the patient. Sleep apnoea breathing therapy equipment is intended for use in the home healthcare environment by lay operators as well as in professional healthcare institutions.
Sleep apnoea breathing therapy equipment is not considered to utilize a physiologic closed-loop-control system unless it uses a physiological patient variable to adjust the therapy settings.
This document excludes sleep apnoea breathing therapy equipment intended for use with neonates.
This document is applicable to ME equipment or an ME system intended for those patients who are not dependent on artificial ventilation. This document is not applicable to ME equipment or an ME system intended for those patients who are dependent on artificial ventilation such as patients with central sleep apnoea.
This document is also applicable to those accessories intended by their manufacturer to be connected to sleep apnoea breathing therapy equipment, where the characteristics of those accessories can affect the basic safety or essential performance of the sleep apnoea breathing therapy equipment.
Masks and application accessories intended for use during sleep apnoea breathing therapy are additionally addressed by ISO 17510. Refer to Figure AA.1 for items covered further under this document.
If a clause or subclause is specifically intended to be applicable to ME equipment only, or to ME systems only, the title and content of that clause or subclause will say so. If that is not the case, the clause or subclause applies both to ME equipment and to ME systems, as relevant.
Hazards inherent in the intended physiological function of ME equipment or ME systems within the scope of this document are not covered by specific requirements in this document except in 7.2.13 and 8.4.1 of the general standard.
NOTE 2        See also 4.2 of the general standard.
This document does not specify the requirements for:
–    ventilators or accessories intended for critical care ventilators for ventilator-dependent patients, which are given in ISO 80601‑2‑12.
–    ventilators or accessories intended for anaesthetic applications, which are given in ISO 80601-2-13.
–    ventilators or accessories intended for home care ventilators for ventilator-dependent patients, which are given in ISO 80601-2-72.
–    ventilators or accessories intended for emergency and transport, which are given in ISO 80601-2-84.
–    ventilators or accessories intended for home-care ventilatory support, which are given in ISO 80601‑2-79 and ISO 80601‑2‑80.
–    high-frequency ventilators[23], which are given in ISO 80601-2-87.
–    respiratory high flow equipment, which are given in ISO 80601‑2‑90;
NOTE 3      ISO 80601-2-80 ventilatory support equipment can incorporate high-flow therapy operational mode, but such a mode is only for spontaneously breathing patients.
–    user-powered resuscitators, which are given in ISO 10651-4;
–    gas-powered emergency resuscitators, which are given in ISO 10651-5;
–    oxygen therapy constant flow ME equipment; and
–    cuirass or “iron-lung” ventilation equipment.

  • Standard
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day