SIST EN 61010-2-202:2017
(Main)Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators (IEC 61010-2-202:2016)
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-202: Particular requirements for electrically operated valve actuators (IEC 61010-2-202:2016)
This part of IEC 61010 specifies the safety requirements for electric ACTUATORs and
SOLENOIDs, as applied to valves, intended to be installed in an industrial process or discrete
control environment.
This part of IEC 61010 specifies:
– particular safety requirements for general purpose electrically operated valve ACTUATORs
and SOLENOIDs,
– related verification tests.
The general purpose electrically operated valve ACTUATORs and SOLENOIDs, covered by this
part of IEC 61010 are limited to:
– those rated 600 V alternative current/ 840 V direct current or less,
Service personnel interface to equipment included in the scope of this document.
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2-202: Besondere Anforderungen für elektrisch betriebene Ventile und Stellantriebe (IEC 61010-2-202:2016)
Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-202: Exigences particulières pour les actionneurs à vanne à commande électrique (IEC 61010-2-202:2016)
L'IEC 61010-2-202:2016 spécifie les exigences de sécurité relatives aux ACTIONNEURs et SOLENOÏDEs électriques, telles qu'appliquées aux vannes destinées à être installées dans un processus industriel ou dans un environnement de commande discret.
Cette publication doit être lue conjointement avec la IEC 61010-1:2010
Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko uporabo - 2-202. del: Posebne zahteve za električni pogon ventilov (IEC 61010-2-202:2016)
Ta del standarda IEC 61010 določa varnostne zahteve za električna SPROŽILA in ELEKTROMAGNETE, ki se uporabljajo za ventile, namenjene inštalaciji v industrijskih procesih ali diskretnih kontrolnih okoljih.
Ta del standarda IEC 61010 določa:
– posebne varnostne zahteve za električna SPROŽILA in ELEKTROMAGNETE za splošni namen,
– povezane preskuse.
Električna SPROŽILA in ELEKTROMAGNETI za splošni namen, ki so zajeti v tem delu standarda IEC 61010, so omejeni na:
– tiste z nazivno napetostjo 600 V za izmenični tok/840 V za enosmerni tok ali manj.
Vmesnik opreme za servisno osebje spada na področje uporabe tega dokumenta.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 61010-2-202:2017
01-september-2017
9DUQRVWQH]DKWHYH]DHOHNWULþQRRSUHPR]DPHULWYHQDG]RULQODERUDWRULMVNR
XSRUDERGHO 3RVHEQH]DKWHYH]DHOHNWULþQLSRJRQYHQWLORY ,(&
6DIHW\UHTXLUHPHQWVIRUHOHFWULFDOHTXLSPHQWIRUPHDVXUHPHQWFRQWURODQGODERUDWRU\
XVH3DUW 3DUWLFXODUUHTXLUHPHQWVIRUHOHFWULFDOO\RSHUDWHGYDOYHDFWXDWRUV
,(&
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2
-202: Besondere Anforderungen für elektrisch betriebene Ventile und Stellantriebe (IEC
61010-2-202:2016)
Règles de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire - Partie 2-202: Exigences particulières pour les actionneurs à vanne à
commande électrique (IEC 61010-2-202:2016)
Ta slovenski standard je istoveten z: EN 61010-2-202:2017
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
23.060.01 Ventili na splošno Valves in general
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
SIST EN 61010-2-202:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 61010-2-202:2017
---------------------- Page: 2 ----------------------
SIST EN 61010-2-202:2017
EUROPEAN STANDARD EN 61010-2-202
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2017
ICS 13.110; 17.020; 19.020; 25.040.40
English Version
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 2-202: Particular requirements
for electrically operated valve actuators
(IEC 61010-2-202:2016)
Règles de sécurité pour appareils électriques Sicherheitsbestimmungen für elektrische Mess-,
de mesurage, de régulation et de laboratoire - Steuer-, Regel- und Laborgeräte -
Partie 2-202: Exigences particulières pour les actionneurs Teil 2-202: Besondere Anforderungen für elektrisch
à vanne à commande électrique betriebene Ventile und Stellantriebe
(IEC 61010-2-202:2016) (IEC 61010-2-202:2016)
This European Standard was approved by CENELEC on 2016-08-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61010-2-202:2017 E
---------------------- Page: 3 ----------------------
SIST EN 61010-2-202:2017
EN 61010-2-202:2017
European foreword
The text of document 65/627/FDIS, future edition 1 of IEC 61010-2-202, prepared by IEC/TC 65
"Industrial-process measurement, control and automation" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN 61010-2-202:2017.
The following dates are fixed:
(dop) 2017-10-21
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2020-04-21
• latest date by which the national standards conflicting with
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61010-2-202:2016 was approved by CENELEC as a
European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST EN 61010-2-202:2017
EN 61010-2-202:2017
Annex ZA
(normative)
Normative references to international publications
with their
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.