49.030.30 - Nuts
ICS 49.030.30 Details
Nuts
Muttern. Gewindeeinsatze
Ecrous
Matice
General Information
Frequently Asked Questions
ICS 49.030.30 is a classification code in the International Classification for Standards (ICS) system. It covers "Nuts". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 454 standards classified under ICS 49.030.30 (Nuts). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
e-Library Subscription
Create subscription and get permanent access to documents within 49.030.30 - Nuts
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies the technical and quality assurance requirements for externally threaded fasteners in material FE-PA92HT (A286) of tensile strength class 900 MPa at room temperature, maximum test temperature of material 650 °C, either manufactured by machining from bar or forging.
Primarily for aerospace applications, it is applicable to such externally threaded fasteners when referenced on the product standard or drawing.
- Standard24 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self-locking serrated shank nuts in FE-PA2601, for aerospace applications.
Classification: 1 100 MPa /650 °C .
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the technical and quality assurance requirements for externally threaded fasteners in material FE-PA92HT (A286) of tensile strength class 900 MPa at room temperature, maximum test temperature of material 650 °C, either manufactured by machining from bar or forging.
Primarily for aerospace applications, it is applicable to such externally threaded fasteners when referenced on the product standard or drawing.
- Standard24 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self-locking serrated shank nuts in FE-PA2601, for aerospace applications.
Classification: 1 100 MPa /650 °C .
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self-locking bihexagonal nuts in NI-PH2601, MoS2 coated, for aerospace applications.
Classification: 1 550 MPa /425 °C .
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self-locking bihexagonal nuts in NI-PH2601, MoS2 coated, for aerospace applications.
Classification: 1 550 MPa /425 °C .
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies test methods for metric self-locking nuts with MJ threads intended for use in aerospace applications at maximum operating temperature greater than 425 °C. It describes the test device and the method for each test. It applies to self-locking nuts as defined above, provided that the relevant documents (dimensional standard, product standard, drawing, procurement specification, etc.) refer to this document.
- Standard21 pagesEnglish languagesale 15% off
This document specifies the characteristics of self-locking, shank nuts, in NI-PH2601, silver plated, for aerospace applications.
Classification: 1 550 MPa /600 °C .
- Standard6 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self-locking shank nuts in NI-P101HT, silver plated, for use in 30° cone holes, for aerospace applications.
Classification: 1 210 MPa /730 °C .
- Standard7 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self-locking shank nuts in NI-P101HT, silver plated, for use in 30° cone holes, for aerospace applications.
Classification: 1 210 MPa /730 °C .
- Standard7 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics, qualification and acceptance requirements for helical coil screw thread inserts.
It is applicable whenever referenced.
- Standard21 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics, qualification and acceptance requirements for helical coil screw thread inserts.
It is applicable whenever referenced.
- Standard21 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics for hexagon nuts, with counterbore and captive washer, with a self-locking feature achieved by forming the upper portion out-of-round, in steel, cadmium plated, MoS2 lubricated, classification 1 100 MPa /235 °C .
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics for hexagon nuts, with counterbore and captive washer, with a self-locking feature achieved by forming the upper portion out-of-round, in steel, cadmium plated, MoS2 lubricated, classification 1 100 MPa /235 °C .
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies test methods for metric self-locking nuts with MJ threads intended for use in aerospace construction at maximum operating temperatures less than or equal to 425 °C. It describes the test device and the method for each test. It applies to self-locking nuts as defined above, provided that the relevant documents (dimensional standard, drawing, procurement specification, etc.) refer to this document.
- Standard19 pagesEnglish languagesale 15% off
This document specifies the characteristics of hexagonal plain nuts, reduced height, normal across flats, in aluminium alloy, anodized, for aerospace applications.
Classification: 450 MPa /120 °C .
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of hexagonal plain nuts, reduced height, normal across flats, in aluminium alloy, anodized, for aerospace applications.
Classification: 450 MPa /120 °C .
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the dimensions of self-locking, silver-coated bi-hexagonal nuts with MJ-thread in heat resisting nickel base alloy NI-P101HT for aerospace applications.
Maximum test temperature of the material 730 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self-locking, floating, two lug anchor nuts, reduced series,
with counterbore, in steel, cadmium plated, MoS 2 lubricated.
Classification: 1 100 MPa1/235 °C2
- Standard9 pagesEnglish languagee-Library read for1 day
This document specifies the dimensions of self-locking, silver-coated bi-hexagonal nuts with MJ-thread in heat resisting nickel base alloy NI-P101HT for aerospace applications.
Maximum test temperature of the material 730 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self-locking, floating, two lug anchor nuts, reduced series,
with counterbore, in steel, cadmium plated, MoS 2 lubricated.
Classification: 1 100 MPa1/235 °C2
- Standard9 pagesEnglish languagee-Library read for1 day
This standard specifies characteristics of self-locking hexagonal slotted/castellated nuts, in steel, cadmium plated, MoS2 lubricated, for aerospace applications.
Classification: 900 MPa /235 °C .
- Standard8 pagesEnglish languagee-Library read for1 day
This standard specifies characteristics of self-locking hexagonal slotted/castellated nuts, in steel, cadmium plated, MoS2 lubricated, for aerospace applications.
Classification: 900 MPa /235 °C .
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of plain hexagonal nuts, reduced height, normal across flats, in steel, cadmium plated, for aerospace applications.
Classification: 900 MPa/235 °C.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of plain hexagonal nuts, reduced height, normal across flats, in steel, cadmium plated, for aerospace applications.
Classification: 900 MPa/235 °C.
- Standard10 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self-locking, shank nuts, in NI-PH2601, silver plated, for aerospace applications.
Classification: 1 550 MPa /600 °C .
- Standard6 pagesEnglish languagee-Library read for1 day
This document defines the tolerances of form and position of metric nuts meant for aerospace construction. These tolerances comply with ISO 1101, ISO 2692 and ISO 5459.
- Standard19 pagesEnglish languagesale 15% off
This document specifies the characteristics, qualification and acceptance requirements for self locking shaft-nuts and threaded rings, with right- or left-hand MJ threads, in FE-PA2601, silver plated, for aerospace applications.
Temperature class: 450 °C ).
It is applicable whenever referenced.
- Standard22 pagesEnglish languagee-Library read for1 day
This European standard specifies the characteristics of self-locking, air resistant, sealing, floating, two lug anchor nuts, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated.
Classification: 900 MPa/235 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This European standard specifies the characteristics of self-locking, fuel resistant, sealing, floating, two lug anchor nuts, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated.
Classification: 900 MPa/120 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of hexagon plain nuts, reduced height, reduced across flats, with left hand thread, in heat resisting steel, silver plated.
Classification: 600 MPa /425 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of hexagon plain nuts, reduced height, reduced across flats, in heat resisting steel, silver plated.
Classification: 600 MPa/425 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of hexagonal slotted/castellated nuts, normal height, normal across flats, in heat resisting steel, silver plated.
Classification: 1 100 MPa/650 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics, qualification and acceptance requirements for self locking shaft-nuts and threaded rings, with right- or left-hand MJ threads, in FE-PA2601, silver plated, for aerospace applications.
Temperature class: 450 °C ).
It is applicable whenever referenced.
- Standard22 pagesEnglish languagee-Library read for1 day
This European standard specifies the characteristics of self-locking, air resistant, sealing, floating, two lug anchor nuts, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated.
Classification: 900 MPa/235 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This European standard specifies the characteristics of self-locking, fuel resistant, sealing, floating, two lug anchor nuts, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated.
Classification: 900 MPa/120 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This standard specifies the characteristics of self-locking bihexagonal nuts, with counterbore, in heat resisting nickel base alloy, passivated, MoS2 lubricated.
Classification: 1 550 MPa / 315 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of hexagon plain nuts, reduced height, reduced across flats, with left hand thread, in heat resisting steel, silver plated.
Classification: 600 MPa /425 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of hexagon plain nuts, reduced height, reduced across flats, in heat resisting steel, silver plated.
Classification: 600 MPa/425 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of hexagonal slotted/castellated nuts, normal height, normal across flats, in heat resisting steel, silver plated.
Classification: 1 100 MPa/650 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self locking shank nuts in NI PH1302, silver plated on thread, for use in 60° cone holes, for aerospace applications.
Classification: 1 210 MPa / 730 °C.
- Standard6 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self-locking shank nuts in NI PH2601, silver plated on thread, for aerospace applications.
Classification: 1 550 MPa / 600 °C.
- Standard6 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self-locking shank nuts in FE PA2601, silver plated on thread, for aerospace applications.
Classification: 1 100 MPa / 650 °C.
- Standard6 pagesEnglish languagee-Library read for1 day
This standard specifies the characteristics of self-locking bihexagonal nuts, with counterbore, in heat resisting nickel base alloy, passivated, MoS2 lubricated.
Classification: 1 550 MPa / 315 °C.
- Standard8 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of inserts, self locking, helical coil, tanged insertion drive, screw thread in NI PH2801, for aerospace applications.
Maximum test temperature: 350 °C.
- Standard9 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of inserts, self locking, helical coil, tanged insertion drive, with MJ screw thread in NI PH2801 material, for aerospace applications.
Maximum test temperature: 550 °C.
- Standard9 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of thrust wire nuts for pipe couplings 8°30', in titanium alloy, for aerospace applications.
Nominal pressure: up to 28 000 kPa.
Temperature range: −55 °C to 135 °C.
- Standard7 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self locking shank nuts in NI PH1302, silver plated on thread, for use in 60° cone holes, for aerospace applications.
Classification: 1 210 MPa / 730 °C.
- Standard6 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self-locking shank nuts in NI PH2601, silver plated on thread, for aerospace applications.
Classification: 1 550 MPa / 600 °C.
- Standard6 pagesEnglish languagee-Library read for1 day
This document specifies the characteristics of self-locking shank nuts in FE PA2601, silver plated on thread, for aerospace applications.
Classification: 1 100 MPa / 650 °C.
- Standard6 pagesEnglish languagee-Library read for1 day