iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 41017:2024

(Main)

Facility management - Guidance on emergency preparedness and management of an epidemic (ISO 41017:2024)

Facility management - Guidance on emergency preparedness and management of an epidemic (ISO 41017:2024)

The purpose of this guide is to ensure the health and safety of people through facility management in response to outbreaks in all types of workplaces, In order to achieve the normal operation of the organization at the same time, but also to assume the responsibility of society. This guide specifies the general, epidemic prevention and control strategy deployment, organization and leadership, epidemic prevention work requirements, resource guarantee, prevention and control process management, prevention and control supervision as well as improvement requirements of the facility management industry. This guide is applicable to the epidemic prevention and control work in the facility management industry.

Facility Management - Leitfaden für die Notfallvorsorge und Management einer Epidemie (ISO 41017:2024)

Dieses Dokument bietet Organisationen eine allgemeine Anleitung zur Planung, Minderung und/oder Kontrolle der Risiken und Auswirkungen einer Epidemie, um die einrichtungsbezogene Gesundheit und Sicherheit sowie das Wohlbefinden zu schützen.
Dieses Dokument ist anwendbar für alle Organisationen, die ganz oder teilweise in Betrieb sind, den Betrieb wieder fortsetzen oder einen neuen Betrieb aufnehmen.

Facility management - Recommandations relatives à l’anticipation des situations d’urgence et au management d’une épidémie (ISO 41017:2024)

Le présent document fournit des recommandations générales aux organismes sur la manière de prévoir, d’atténuer et/ou de gérer les risques et les impacts d’un événement épidémique afin de protéger la santé, la sécurité et le bien-être liés aux installations.
Le présent document est applicable à tous les organismes, qu’ils soient pleinement ou partiellement en activité, en phase de reprise ou nouvellement en activité.

Upravljanje objektov in storitev - Navodila za pripravljenost na izredne razmere in obvladovanje epidemije (ISO 41017:2024)

Namen te smernice je zagotoviti varnost in zdravje ljudi prek upravljanja objektov v odzivih na izbruhe bolezni na delovnih mestih vseh vrst, da se istočasno zagotovi normalno delovanje organizacije, pri tem pa se prevzame tudi družbena odgovornost. Ta smernica določa splošne zahteve, zahteve za preprečevanje epidemije in izvajanje strategije nadzora, zahteve za organizacijo in vodenje, zahteve dela za preprečevanje epidemije, zahteve za jamstvo za vire, zahteve za upravljanje preprečevanja in nadzornih procesov, nadzora preprečevanja in obvladovanja ter zahteve za izboljšave v panogi upravljanja objektov. Ta smernica se uporablja za preprečevanje epidemije in nadzor v panogi upravljanja objektov.

General Information

Status
Published
Public Enquiry End Date
30-Jan-2023
Publication Date
15-Apr-2024
ICS
03.080.10 - Maintenance services. Facilities management
03.100.01 - Company organization and management in general
Technical Committee
I13 - Imaginarni 13
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
25-Mar-2024
Due Date
30-May-2024
Completion Date
16-Apr-2024
Ref Project
EN ISO 41017:2024 - Facility management - Guidance on emergency preparedness and management of an epidemic (ISO 41017:2024)

Buy Standard

EN ISO 41017:2024EN ISO 41017:2024
PreviousNext
Standard
EN ISO 41017:2024
English language
32 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
prEN ISO 41017:2023 - BARVEprEN ISO 41017:2023 - BARVE
PreviousNext
Draft
prEN ISO 41017:2023 - BARVE
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 41017:2024
01-maj-2024
Upravljanje objektov in storitev - Navodila za pripravljenost na izredne razmere in
obvladovanje epidemije (ISO 41017:2024)
Facility management - Guidance on emergency preparedness and management of an
epidemic (ISO 41017:2024)
Facility Management - Leitfaden für die Notfallvorsorge und Management einer Epidemie
(ISO 41017:2024)
Facility management - Recommandations relatives à l’anticipation des situations
d’urgence et au management d’une épidémie (ISO 41017:2024)
Ta slovenski standard je istoveten z: EN ISO 41017:2024
ICS:
03.080.10 Vzdrževalne storitve. Maintenance services.
Upravljanje objektov Facilities management
03.100.01 Organizacija in vodenje Company organization and
podjetja na splošno management in general
SIST EN ISO 41017:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 41017:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 41017:2024


EN ISO 41017
EUROPEAN STANDARD

NORME EUROPÉENNE

March 2024
EUROPÄISCHE NORM
ICS 03.080.10
English Version

Facility management - Guidance on emergency
preparedness and management of an epidemic (ISO
41017:2024)
Facility management - Recommandations relatives à Facility Management - Leitfaden für die
l'anticipation des situations d'urgence et au Notfallvorsorge und Management einer Epidemie (ISO
management d'une épidémie (ISO 41017:2024) 41017:2024)
This European Standard was approved by CEN on 6 January 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 41017:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 41017:2024
EN ISO 41017:2024 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 41017:2024
EN ISO 41017:2024 (E)
European foreword
This document (EN ISO 41017:2024) has been prepared by Technical Committee ISO/TC 267 "Facility
management" in collaboration with Technical Committee CEN/TC 348 “Facility Management” the
secretariat of which is held by SN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards
shall be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 41017:2024 has been approved by CEN as EN ISO 41017:2024 without any modification.

3

------
...

SLOVENSKI STANDARD
oSIST prEN ISO 41017:2023
01-januar-2023
Upravljanje objektov in storitev - Navodila za pripravljenost na izredne razmere in
obvladovanje epidemije (ISO/DIS 41017:2022)
Facility management - Guidance on emergency preparedness and management of an
epidemic (ISO/DIS 41017:2022)
Facility Management - Leitfaden für die Notfallvorsorge und Management einer Epidemie
(ISO/DIS 41017:2022)
Facility management - Recommandations relatives à l’anticipation des situations
d’urgence et au management d’une épidémie (ISO/DIS 41017:2022)
Ta slovenski standard je istoveten z: prEN ISO 41017
ICS:
03.080.10 Vzdrževalne storitve. Maintenance services.
Upravljanje objektov Facilities management
03.100.01 Organizacija in vodenje Company organization and
podjetja na splošno management in general
oSIST prEN ISO 41017:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 41017:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 41017:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 41017
ISO/TC 267 Secretariat: BSI
Voting begins on: Voting terminates on:
2022-11-09 2023-02-01
Facility management – Guidance on emergency
preparedness and management of an epidemic
ICS: 03.080.10
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 41017:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 3 ----------------------
oSIST prEN ISO 41017:2023
ISO/DIS 41017:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 41017
ISO/TC 267 Secretariat: BSI
Voting begins on: Voting terminates on:

Facility management – Guidance on emergency
preparedness and management of an epidemic
ICS: 03.080.10
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 41017:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2022 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022

---------------------- Page: 4 ----------------------
oSIST prEN ISO 41017:2023
ISO/DIS 41017:2022(E)
Contents Page
Foreword .v
Introduction . vi
1 Scope . 1
2 Normative references .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50726-1:2024(Main)
Emergency and danger systems - Part 1: Emergency and danger response systems (EDRS) - Basic requirements, duties, responsibilities and activities
EN 50726-1:2024

This document applies to the planning, installation, commissioning, operation and maintenance of an emergency and danger response system. An emergency and danger response system is part of an overall solution for dealing with specific events such as emergencies or crises.
This document
-   specifies:
-   technical processes and responsibilities for supporting all procedures from the registration of an event (emergency, danger) up to its final processing;
-   the technical risk management including the definition of safety/security goals and the workflow organization as well as the necessary specifications regarding a technical risk management file;
-   associated duties, responsibilities and activities as parts of an integrated overall risk management process to achieve the safety and security goals, effectiveness and efficiency as well as data and system safety/security;
-   three different grades of safety/security, with the respective product functionalities required to achieve them;
-   the basic requirements for emergency and danger response systems (EDRS) in public buildings such as education facilities (e.g. schools, universities), government facilities, kindergartens and similar facilities;
-   the responsibilities under applicable national law about Safety and Health at Work Laws and thus particularly addresses the responsibility of employers;
-   describes:
-   the process of establishing, maintaining and updating a risk management file in which, inter alia, the technical risks are listed and evaluated and the residual technical risks are defined, resulting in the grade and structure of the EDRS;
-   is intended to support the implementation of:
-   National legal and other provisions (e.g. Act on Equal Opportunities for People with Disabilities, Safety and Health at Work Laws, education laws);
-   gives relevant guidance on:
-   the organizational risk management;
-   does not replace the specifications of standards to the following systems:
-   fire safety systems including, but not limited to, fire detection and fire alarm systems, fixed firefighting systems, smoke and heat control systems,
-   security systems including, but not limited to, intrusion and hold-up alarm systems, electronic access control systems, external perimeter security systems and video surveillance systems,
-   applicable national standards on call systems.
All such systems can, however, be integrated into an emergency and danger response system (EDRS), taking into account the relevant provisions made in the respective standards for such products and systems.
Other products and systems from the entire field of standardization, such as alarm systems, danger warning and danger alarm systems, escape routing systems, public address systems used to respond to a danger, can also be used in or integrated into an emergency and danger response system if the relevant requirements of the standards for such products or systems are met.
This document does not specify any risk levels, in particular no acceptable residual risks. Technical risk management and organizational risk management are equal parts of the overall risk management.
This document is also applicable to non-public buildings with a similar risk and requirement for protection.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1751:2024(Main)
Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves
EN 1751:2024

This document specifies methods for the testing and rating of dampers and valves used in air distribution systems with pressure differences up to 2 000 Pa.
The tests incorporated in this document will address:
-   leakage past a closed damper or valve (for classification see Annex C);
-   casing leakage (for classification see Annex C);
-   flow rate/pressure requirement characteristics;
-   torque: (see Annex A);
-   thermal transmittance: (see Annex B).
The acoustic testing of dampers and valves is not included in this document. The tests specified above apply to the following:
-   measurement of leakage past a closed damper or valve;
-   measurement of casing leakage;
-   determination of flow rate and pressure requirements;
-   measurement of torque characteristics (see Annex A);
-   measurement of thermal transfer characteristics to determine insulation properties (see Annex B).
NOTE   Certain aspects of the dynamic performance of dampers and/or valves are dependent upon the air distribution system to which they are connected and are, therefore, difficult to measure in isolation. Such considerations have led to the omission of these aspects of the dynamic performance measurements from this document. Also, in common with other air distribution components, the results from tests carried out in accordance with this document may not be directly applicable if the damper or valve is situated in an area of non-uniform flow.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50528:2024(Main)
Insulating ladders for use on or near low voltage electrical installations
EN 50528:2024

This document is applicable to portable ladders made only of non-conductive stiles, including accessories (pole leaning device, adjustable levelling device, adjustable ladder stabilizer, etc.) used to work on or near electrical systems and installations in the low voltage range (up to 1 000 V AC/1 500 V DC.).
These ladders are used, to provide temporary access, generally on overhead line structures and to undertake electrical operations. They are intended to be used by one person only.
These ladders, in conjunction with other protective equipment provide sufficient insulation level to protect against inadvertent contact with live low voltage installations.
This document does not cover ladders used for live working on electrical installations at voltages above 1 000 V AC and above 1 500 V DC. These insulating ladders are separately covered by EN 61478.
This document does not cover products not made entirely with non-conductive stiles generally called mixed ladders. In this case EN 131 series apply.
This document does not cover step stools which are covered by EN 14183.
These ladders are only for professional use. Only skill persons, after an appropriate training can use this type of ladder for professional applications.
The products designed and manufactured according to this document contribute to the safety of the users provided they are used by skilled persons, in accordance with safe methods of work and the instructions for use (where appropriate).

  • Standard
    68 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16867:2020+A2:2024(Main + Amendment)
Building hardware - Mechatronic door furniture - Requirements and test methods
EN 16867:2020+A2:2024

1.1   General
This document applies to Mechatronic door furniture (MDF) fitted on the door set which gives the possibility to control the locking and/or release part through an electronic authorization means. This can be operable by credentials (i.e. card, code, biometric).
The MDF according to this document is combined with locks according to EN 12209, EN 14846, prEN 15685 or may be a part of an emergency exit device according to EN 179, EN 1125 or EN 13637.
The MDF may be standalone or linkable to an external control system.
The document would allow classifying the MDF upon several characteristics such as category of use, durability, environmental, security, and type of operating device.
The suitability of the MDF for use on fire or smoke-door assemblies is determined by fire resistance tests conducted in addition to the performance testing specified by this document.
1.2   Exclusions
This document does not cover:
-   mechatronic cylinders according to EN 15684;
-   electromechanical operated locks and striking plates according to EN 14846.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 6806:2024(Main)
Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2024)
EN ISO 6806:2024

ISO 6806:2017 specifies the minimum requirements for rubber hoses and hose assemblies for use in oil burners.
The following two types of hose assembly are specified.
- Type 1: Hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection; maximum working pressure 1,0 MPa (10 bar); maximum oil temperature 100 °C.
- Type 2: Hose assemblies for insertion between the oil burner pump and the atomizing connection; maximum working pressure 4,0 MPa (40 bar); maximum oil temperature 100 °C.
The hose assemblies specified in this document are not intended to be used, without special assessment, for purposes other than oil burner installations.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13557:2024(Main)
Cranes - Controls and control stations
EN 13557:2024

This document specifies health and safety design requirements for control devices and control stations for all types of cranes.
Specific requirements for particular types of crane are given in the appropriate European standard for the particular crane type.
Control systems are covered by other standards, e.g. EN 60204-32:2008 and EN 13135:2013+A1:2018.
This document does not deal with noise hazards because these are dealt with in safety standards for specific types of cranes. It also does not address the design of the cabin with regard to its sound insulation properties.
This document covers specific hazards, which could occur during the use of control devices and control stations. It does not cover hazards, which could occur during transport, construction, modification, de-commissioning or disposal. The hazards covered by this standard are identified in Clause 4.
This document is applicable after the date of approval by CEN of this standard.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12183:2024(Main)
Nuclear fuel technology - Controlled-potential coulometric measurement of plutonium (ISO 12183:2024)
EN ISO 12183:2024

ISO 12183:2016 describes an analytical method for the electrochemical assay of pure plutonium nitrate solutions of nuclear grade, with a total uncertainty not exceeding ±0,2 % at the confidence level of 0,95 for a single determination (coverage factor, K = 2). The method is suitable for aqueous solutions containing more than 0,5 g/L plutonium and test samples containing between 4 mg and 15 mg of plutonium. Application of this technique to solutions containing less than 0,5 g/L and test samples containing less than 4 mg of plutonium requires experimental demonstration by the user that applicable data quality objectives will be met.
For some applications, purification of test samples by anion exchange is required before measurement to remove interfering substances when present in significant amounts.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63281-3-1:2024(Main)
E-Transporters - Part 3-1: Performance test method for total run time of e-scooters with consideration to environmental conditions of actual use (IEC 63281-3-1:2024)
EN IEC 63281-3-1:2024

IEC 63281-3-1:2024 specifies the test method for the total run time of an e-scooter for single-person transportation with consideration of the temperature conditions of actual use when the e-scooter is operated by the user in various temperatures for use on the road or in public spaces.
This document does not cover e-scooters for persons with disabilities or elderly persons. Also, this document excludes cargo e-scooters.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 2559:2023/A1:2024(Amendment)
Aerospace series - Carbon, glass and aramid fibre preimpregnates - Determination of the resin and fibre content and the mass of fibre per unit area
EN 2559:2022/A1:2024

This document specifies methods for determining the resin content, fibre content and mass of fibre per unit area of fibre preimpregnates for aerospace use.

  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17134-1:2024(Main)
Textiles and textile products - Determination of biocide additives - Part 1: 2-Phenylphenol and triclosan, method using liquid chromatography
EN 17134-1:2024

This document specifies a test method for the determination of the content of the preservative agents (biocidal products) 2-phenylphenol (OPP) and triclosan in textile materials and articles composed of textile products, by liquid chromatography.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day