SIST EN 50643:2019/A1:2021
(Amendment)Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment
Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment
Elektrische und elektronische Haushalts- und Bürogeräte - Messung der Leistungsaufnahme im vernetzten Bereitschaftsbetrieb von Geräten am Netzwerkrand
Appareils électriques et électroniques pour application domestique et équipement de bureau - Mesure de la consommation d'énergie en veille avec maintien de la connexion au réseau des équipements de périphérie
Električna in elektronska gospodinjska in pisarniška oprema - Merjenje porabe električne energije v stanju omrežne pripravljenosti na robu omrežja
General Information
- Status
- Published
- Publication Date
- 03-Jan-2021
- Technical Committee
- AVM - Audio, video and multimedia systems and equipment
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 21-Apr-2020
- Due Date
- 26-Jun-2020
- Completion Date
- 04-Jan-2021
Relations
- Effective Date
- 03-Mar-2020
Overview
EN 50643:2018/A1:2020 is a CENELEC European standard for the measurement of networked standby power consumption of edge equipment in electrical and electronic household and office products. The amendment A1 (2020) updates EN 50643:2018 and provides a voluntary, harmonised method to assess power drawn when devices remain connected to a network (wired or wireless) but are not in active use. When cited in the Official Journal of the EU, compliance with its normative clauses gives a presumption of conformity with ecodesign requirements.
Key topics and requirements
- Scope: Edge equipment in household and office electrical/electronic appliances (networked standby conditions).
- Networked standby definition and measurement focus: Addresses conditions where equipment maintains a network connection and consumes power to remain reachable.
- Power management and standby modes:
- Requirement to define and measure power consumption in “networked standby” into which a device may be switched by a power management function.
- Distinction between regular networked equipment and HiNA (High Network Availability) functionality, with different measurement/management considerations.
- Wired and wireless network port states:
- Measurement requirements consider scenarios when all wired ports are disconnected and when all wireless network ports are deactivated, and when all ports are connected/activated.
- Includes the possibility of deactivating wireless network connections as a design/measurement consideration.
- Technical documentation: Specifies information to be provided in technical documentation to demonstrate compliance with ecodesign requirements (as mapped in Annex ZZ).
- Regulatory linkage: Maps clauses to ecodesign Regulations (EC) No 1275/2008 and No 642/2009 as amended by Commission Regulation (EU) No 801/2013.
Applications
- Manufacturers of household and office equipment (including televisions) use this standard to:
- Design energy-efficient networked standby behavior and power management features.
- Generate documentation and measurement data for ecodesign compliance.
- Test laboratories and certification bodies apply the standard to measure standby power and verify conformity.
- Product designers, compliance engineers, and sustainability teams use it to reduce standby energy use and meet regulatory requirements.
- Regulators and procurement teams use it as a technical reference for energy performance specifications.
Related standards and references
- Commission Regulation (EC) No 1275/2008 (standby and off mode, networked standby) - as amended by EU No 801/2013
- Commission Regulation (EC) No 642/2009 (ecodesign for televisions) - as amended by EU No 801/2013
- Issued by CENELEC / CLC/TC 100X; national adoption occurs through member bodies.
Keywords: EN 50643, networked standby, standby power, edge equipment, ecodesign, power management, HiNA, measurement, household and office equipment, CENELEC.
Frequently Asked Questions
SIST EN 50643:2019/A1:2021 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment". This standard covers: Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment
Electrical and electronic household and office equipment - Measurement of networked standby power consumption of edge equipment
SIST EN 50643:2019/A1:2021 is classified under the following ICS (International Classification for Standards) categories: 35.260 - Office machines; 97.030 - Domestic electrical appliances in general. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 50643:2019/A1:2021 has the following relationships with other standards: It is inter standard links to SIST EN 50643:2019. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 50643:2019/A1:2021 is associated with the following European legislation: EU Directives/Regulations: 1275/2008, 2019/2017, 2019/2022, 642/2009, 801/2013; Standardization Mandates: M/544. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 50643:2019/A1:2021 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2021
Električna in elektronska gospodinjska in pisarniška oprema - Merjenje porabe
električne energije v stanju omrežne pripravljenosti na robu omrežja
Electrical and electronic household and office equipment - Measurement of networked
standby power consumption of edge equipment
Elektrische und elektronische Haushalts- und Bürogeräte - Messung der
Leistungsaufnahme im vernetzten Bereitschaftsbetrieb von Geräten am Netzwerkrand
Appareils électriques et électroniques pour application domestique et équipement de
bureau - Mesure de la consommation d'énergie en veille avec maintien de la connexion
au réseau des équipements de périphérie
Ta slovenski standard je istoveten z: EN 50643:2018/A1:2020
ICS:
35.260 Pisarniški stroji Office machines
97.030 Električni aparati za dom na Domestic electrical
splošno appliances in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 50643:2018/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2020
ICS 35.260; 97.030
English Version
Electrical and electronic household and office equipment -
Measurement of networked standby power consumption of edge
equipment
Appareils électriques et électroniques pour application Elektrische und elektronische Haushalts- und Bürogeräte -
domestique et équipement de bureau - Mesure de la Messung der Leistungsaufnahme im vernetzten
consommation d'énergie en veille avec maintien de la Bereitschaftsbetrieb von Geräten am Netzwerkrand
connexion au réseau des équipements de périphérie
This amendment A1 modifies the European Standard EN 50643:2018; it was approved by CENELEC on 2020-02-19. CENELEC members
are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the status of a
national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50643:2018/A1:2020 E
European foreword
This document (EN 50643:2018/A1:2020) has been prepared by CLC/TC 100X "Audio, video and
multimedia systems and equipment and related sub-systems".
The following dates are fixed:
• latest date by which this document has (dop) 2021-02-19
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2023-02-19
standards conflicting with this document
have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
1 Modifications to Annex ZA "Relationship between this European Standard
and the eco-design requirements of Commission Regulation (EU) No
801/2013 aimed to be covered"
Replace Annex ZA with the following Annex ZZ:
"
Annex ZZ
(informative)
Relationship between this European Standard and the ecodesign
requirements of both Commission Regulation (EC) No 1275/2008 and
Commission Regulation (EC) No 642/2009, as jointly amended by
Commission Regulation (EU) No 801/2013
This European standard has been prepared under a Commission’s standardisation request to the
European standardisation organisations as regards ecodesign requirements for networked standby in
support of Regulation (EC) No 1275/2008 and Regulation (EC) No 642/2009, M/544 / C(2015) 9468
final of 5 January 2016, to provide one voluntary means of conforming to the ecodesign requirements
on networked standby of the following:
— Commission Regula
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...