35.260 - Office machines

This document provides background information and guidelines for the development of an ontology for office equipment. An example of how such a standard can be used to automate the identification of resources for colour is provided. NOTE Often the terms vocabulary and ontology are used with the same meaning.

This document specifies accessibility guidelines to be considered when planning, developing and designing electrophotographic copying machines, page printers and multi-function devices. These guidelines are intended to improve accessibility required when primarily older persons, persons with disabilities and persons with temporary disabilities (hereafter referred to as older persons and persons with disabilities) use office equipment.

This document specifies the information to be included in the specification sheets for front projection type data projectors and the form of specification sheets. This document is not applicable to units for a rear screen projection.

1.1   Equipment in the scope of this standard
This European Standard specifies methods of measurement of electrical power consumption in networked standby and the reporting of the results for edge equipment.
Power consumption in standby (other than networked standby) is covered by EN 50564, including the input voltage range.
This European Standard also provides a method to test power management and whether it is possible to deactivate wireless network connection(s).
NOTE 1   This standard has be...view more

The present document specifies methods of measurement of electrical power consumption in networked standby and the
reporting of the results for network interconnecting equipment.
Example of interconnecting equipment are in Annex B.
Power consumption in standby (other than networked standby) is covered by CENELEC EN 50564 [1], including the
input voltage range.
The present document also provides a method to test power management and whether it is possible to deactivate
wireless network conn...view more

1.1 Equipment in the scope of this standard This European Standard specifies methods of measurement of electrical power consumption in networked standby and the reporting of the results for edge equipment. Power consumption in standby (other than networked standby) is covered by EN 50564, including the input voltage range. This European Standard also provides a method to test power management and whether it is possible to deactivate wireless network connection(s). NOTE 1 This standard has been w...view more

The present document specifies methods of measurement of electrical power consumption in networked standby and the
reporting of the results for network interconnecting equipment.
Example of interconnecting equipment are in Annex B.
Power consumption in standby (other than networked standby) is covered by CENELEC EN 50564 [1], including the
input voltage range.
The present document also provides a method to test power management and whether it is possible to deactivate
wireless network conn...view more

ISO 9295:2015 specifies four methods for the determination of the sound power levels of high-frequency noise emitted by machinery and equipment in the frequency range covered by the octave band centred at 16 kHz, which includes frequencies between 11,2 kHz and 22,4 kHz. They are complementary to the methods described in ISO 3741 and ISO 3744. The first three methods are based on the reverberation test room technique. The fourth method makes use of a free field over a reflecting plane.
The test ...view more

2019-12-10: TC 108X decision: link GPSD was for sound pressure requirements personal music players. GPSD citation no longer needed because most music players are RED. Link citation under GPSD removed.
2019-10-01: PR reactivated further to D156/C057 (extension of DOW of the superseding EN)
FprAE (PR=23360) merged and published as EN 60950-1:2006/A2:2013(PR= 23359), with the implementation dates of FprAE

IEC/TS 62441:2011 Introduces safeguards to reduce the likelihood of room flash-over as a result of accidental ignition of exterior housings of audio/video and information communication technology products likely to be used in the home, caused by a candle flame. This second edition of IEC 62441 cancels and replaces the first edition published in 2006 and constitutes a technical revision. This edition includes the following technical changes with respect to the previous edition: - acceptance of wo...view more

2019-12-10: TC 108X decision: link GPSD was for sound pressure requirements personal music players. GPSD citation no longer needed because most music players are RED. Link citation under GPSD removed.
2019-10-01: PR reactivated further to D156/C057 (extension of DOW of the superseding EN)
D139/C138: To modify the Swiss A-deviation in EN 60950-1:2006 (PR=16298) in accordance with BT139/CH0114/NCP

2019-12-10: TC 108X decision: link GPSD was for sound pressure requirements personal music players. GPSD citation no longer needed because most music players are RED. Link citation under GPSD removed.
2019-10-01: PR reactivated further to D156/C057 (extension of DOW of the superseding EN)
Implementation of the results of WG 03 * NWI approved because in light of the mandate * Change of dow in dor + 24 months was requested in M/452

IEC/TS 62441:2011 Introduces safeguards to reduce the likelihood of room flash-over as a result of accidental ignition of exterior housings of audio/video and information communication technology products likely to be used in the home, caused by a candle flame. This second edition of IEC 62441 cancels and replaces the first edition published in 2006 and constitutes a technical revision. This edition includes the following technical changes with respect to the previous edition:
- acceptance of w...view more

The contents of the corrigendum of August 2012 have been included in this copy.

The contents of the corrigendum of August 2012 have been included in this copy.

2019-10-01: PR reactivated further to D156/C057 (extension of DOW of the superseding EN)
TC request (approved by D129/C108): Not offered to IEC as only valid for Europe * Voted as prAB

Applicable to mains-powered or battery-powered information technology equipment, including electrical business equipment and associated equipment, with a RATED VOLTAGE not exceeding 600 V. Also applicable are components and subassemblies intended for incorporation in information technology equipment. It is not expected that such components and subassemblies comply with every aspect of the standard, provided that the complete information technology equipment, incorporating such components and sub...view more

ISO/IEC 24700:2004 specifies product characteristics for use in an original equipment manufacturer's or authorized third party's declaration of conformity to demonstrate that a marketed product that contains reused components performs equivalent to new, meeting equivalent to new component specifications and performance criteria, and continues to meet all the safety and environmental criteria required by responsibly built products. It is relevant to marketed products whose manufacturing and recov...view more

This International Standard defines the test methods used to measure power consumption of information technology equipment (ITE) under various modes of operation for the purpose of energy management. ITE includes the products identified in the scope of EN 60950-1.