ISO/IEC 24700:2005
(Main)Quality and performance of office equipment that contains reused components
Quality and performance of office equipment that contains reused components
ISO/IEC 24700:2004 specifies product characteristics for use in an original equipment manufacturer's or authorized third party's declaration of conformity to demonstrate that a marketed product that contains reused components performs equivalent to new, meeting equivalent to new component specifications and performance criteria, and continues to meet all the safety and environmental criteria required by responsibly built products. It is relevant to marketed products whose manufacturing and recovery processes result in the reuse of components. Annex C has a description of how reuse relates to other recycling processes. ISO/IEC 24700:2004 is applicable to: A situation in which a government requires a neutral benchmark to evaluate the quality, safety and performance of equipment that contains reused components and to demonstrate the environmental responsibility of the supplier. When regulations mandate a neutral benchmark for equipment, ISO/IEC 24700:2004 provides the benchmark for proving compliance with such regulations. A situation in which a commercial supplier requires a neutral benchmark to demonstrate and communicate the quality, safety and performance of equipment that contains reused components and to demonstrate the environmental responsibility of the supplier. Situations in which consumers require a neutral benchmark to identify or distinguish environmentally responsible products. ISO/IEC 24700:2004 reflects the world's current approaches that yield products from many manufacturing processes including the reuse of components, with the equipment's warranties and guarantees playing an important role in market acceptance. In today's procurement processes, technical equipment definitions used by regulators must be addressed and, in that sense, ISO/IEC 24700:2004 will be useful in procurement and in the trade facilitation area, to communicate with regulators. ISO/IEC 24700:2004 specifically addresses office equipment. However, in the future it may provide valuable directions for other industries and industrial sectors.
Qualité et performance d'équipement de bureau qui contient des composants réutilisés
General Information
Standards Content (Sample)
INTERNATIONAL ISO/IEC
STANDARD 24700
First edition
2005-07-01
Quality and performance of office
equipment that contains reused
components
Qualité et performance d'équipement de bureau qui contient des
composants réutilisés
Reference number
ISO/IEC 24700:2005(E)
©
ISO/IEC 2005
---------------------- Page: 1 ----------------------
ISO/IEC 24700:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO/IEC 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO/IEC 2005 – All rights reserved
---------------------- Page: 2 ----------------------
ISO/IEC 24700:2005(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references. 1
3 Terms and definitions. 2
4 Office equipment requirements. 2
4.1 Performance. 2
4.2 Upgrades. 2
4.3 Testing. 3
4.4 Quality. 3
4.5 Safety and electromagnetic emissions . 3
4.6 Warranties/Guarantees. 3
4.7 Service. 3
4.8 Environmental responsibility. 3
5 Demonstration of conformance . 4
5.1 Supplier Declaration of conformity. 4
5.2 Documentation. 4
Annex A (normative) Supplier’s declaration of conformity In accordance with ISO/IEC 17050-1 . 5
Annex B (informative) Regulatory summaries . 7
Annex C (informative) Schematic of recycling related technology. 10
© ISO/IEC 2005 – All rights reserved iii
-------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.