oSIST prEN 478:2024
(Main)Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance after exposure at 150 °C
This document specifies a method for determining the effect of heat on unplasticized poly(vinyl chloride) (PVC-U) profiles, to be carried out in air at 150 °C.
It is also applicable to PVC-based profiles at specified temperatures/test conditions.
Kunststoffe - Profile auf Basis von Polyvinylchlorid (PVC) - Bestimmung des Erscheinungsbildes nach Lagerung bei 150 °C
Dieses Dokument legt ein Verfahren zur Bestimmung des Einflusses von Wärme bei 150 °C an der Luft auf Profile aus weichmacherfreiem Polyvinylchlorid (PVC U) fest.
Es ist auch für Profile auf Basis von PVC bei vorgegebenen Temperaturen/Prüfbedingungen anwendbar.
Plastiques - Profilés à base de poly(chlorure de vinyle) (PVC) - Caractérisation de l'aspect après conditionnement à 150 °C
Le présent document spécifie une méthode de détermination du comportement à la chaleur des profilés en poly(chlorure de vinyle) non plastifié (PVC-U), à une température de l’air de 150 °C.
Elle s’applique également aux profilés à base de PVC à des températures/dans des conditions d’essai spécifiées.
Polimerni materiali - Profili na osnovi polivinilklorida (PVC) - Ugotavljanje videza po izpostavi temperaturi 150 °C
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 478:2024
01-julij-2024
Polimerni materiali - Profili na osnovi polivinilklorida (PVC) - Ugotavljanje videza
po izpostavi temperaturi 150 °C
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the appearance
after exposure at 150 °C
Kunststoffe - Profile auf Basis von Polyvinylchlorid (PVC) - Bestimmung des
Erscheinungsbildes nach Lagerung bei 150 °C
Plastiques - Profilés à base de poly(chlorure de vinyle) (PVC) - Caractérisation de
l'aspect après conditionnement à 150 °C
Ta slovenski standard je istoveten z: prEN 478
ICS:
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
oSIST prEN 478:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 478:2024
---------------------- Page: 2 ----------------------
oSIST prEN 478:2024
DRAFT
EUROPEAN STANDARD
prEN 478
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2024
ICS 97.220.30; 97.220.40 Will supersede EN 478:2018
English Version
Plastics - Poly(vinyl chloride) (PVC) based profiles -
Determination of the appearance after exposure at 150 °C
Plastiques - Profilés à base de poly(chlorure de vinyle) Kunststoffe - Profile auf Basis von Polyvinylchlorid
(PVC) - Caractérisation de l'aspect après (PVC) - Bestimmung des Erscheinungsbildes nach
conditionnement à 150 °C Lagerung bei 150 °C
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 249.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 478:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 478:2024
prEN 478:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Apparatus . 4
6 Test specimen . 4
7 Test procedure . 4
8 Expression of results . 5
9 Test report .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.