83.080.20 - Thermoplastic materials
ICS 83.080.20 Details
Thermoplastic materials
Thermoplaste
Matériaux thermoplastiques
Plastomeri
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 83.080.20 - Thermoplastic materials
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies the dimensions and the method for sampling and preparing test specimens, together with the conditions for carrying out the bend test.
The result of the test is also influenced by the deformation behaviour of the tested material, the kind of welding process and the geometry of the sample.
The test is applicable to plate and tube butt jointed assemblies made from thermoplastic materials filled or unfilled, but not reinforced, irrespective of the welding process used. It is not applicable to assemblies with a wall thickness < 3 mm.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the dimensions and the method for sampling and preparing test specimens, together with the conditions for carrying out the bend test.
The result of the test is also influenced by the deformation behaviour of the tested material, the kind of welding process and the geometry of the sample.
The test is applicable to plate and tube butt jointed assemblies made from thermoplastic materials filled or unfilled, but not reinforced, irrespective of the welding process used. It is not applicable to assemblies with a wall thickness < 3 mm.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the thermal stability at elevated temperature of compounds and products based on vinyl chloride homopolymers and copolymers (in the following text abbreviated as PVC) which undergo dehydrochlorination (the evolution of hydrogen chloride).
This document is applicable to the characterization of PVC compounds and products, especially with regard to the effectiveness of their heat-stabilizing systems.
It is applicable to coloured PVC compounds and products where a discolouration test under the action of heat can be unsatisfactory.
This document is applicable to compounded PVC materials and products. It can be applicable to polymers in powder form under appropriate conditions, depending on the agreement between the interested parties.
This document does not apply to PVC compounds in the form of dry blends, since such materials might not be sufficiently homogeneous.
This document does not apply to PVC compounds and products which evolve other decomposition products, in addition to hydrogen chloride, at elevated temperatures that can affect the conductivity of water when they are absorbed into it.
NOTE In this case, ISO 182-4 [2] provides the suitable method for the determination of chloride ion (Cl−) in the absorbing solution.
This document can also be applied to other plastics materials which can evolve hydrogen chloride or other hydrogen halides when heated under the conditions prescribed by the relevant specifications, or as agreed upon between the interested parties.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the thermal stability at elevated temperature of compounds and products based on vinyl chloride homopolymers and copolymers (in the following text abbreviated as PVC) which undergo dehydrochlorination (the evolution of hydrogen chloride).
This document is applicable to the characterization of PVC compounds and products, especially with regard to the effectiveness of their heat-stabilizing systems.
It is applicable to coloured PVC compounds and products where a discolouration test under the action of heat can be unsatisfactory.
This document is applicable to compounded PVC materials and products. It can be applicable to polymers in powder form under appropriate conditions, depending on the agreement between the interested parties.
This document does not apply to PVC compounds in the form of dry blends, since such materials might not be sufficiently homogeneous.
This document does not apply to PVC compounds and products which evolve other decomposition products, in addition to hydrogen chloride, at elevated temperatures that can affect the conductivity of water when they are absorbed into it.
NOTE In this case, ISO 182-4 [2] provides the suitable method for the determination of chloride ion (Cl−) in the absorbing solution.
This document can also be applied to other plastics materials which can evolve hydrogen chloride or other hydrogen halides when heated under the conditions prescribed by the relevant specifications, or as agreed upon between the interested parties.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the general “design for recycling” guidelines for EPS raw materials. It provides guidance on the impact of specific design characteristics on the recyclability of the product in practice and recommended design options to ensure that the product is recyclable, including target values and performance ranges, where applicable. It also provides a definition of recyclable product and of design for recycling.
This document refers to EPS thermal insulation products but may be used for other EPS construction products where appropriate.
This document refers to the recycling processes of EPS insulation products. The sorting and collecting steps are not part of this document.
This document takes into account all currently known recycling processes that are suitable to enable the circular economy for insulation materials. Particular attention is paid to ensuring that the most energy-efficient processes are given preference, especially mechanical recycling.
For some of these processes, practical experience has been gained over many years, so a basic knowledge base for the development of a guideline is already available.
At the same time, it is important to also take into account future-oriented processes, for which at the moment little but increasing experience is available or which have so far only been implemented on a small scale.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the thermal stability at elevated temperature of compounds and products based on vinyl chloride homopolymers and copolymers (in the following text abbreviated as PVC) which undergo dehydrochlorination (the evolution of hydrogen chloride). This document is applicable to the characterization of PVC compounds and products, especially with regard to the effectiveness of their heat-stabilizing systems. It is applicable to coloured PVC compounds and products where a discolouration test under the action of heat can be unsatisfactory. This document is applicable to compounded PVC materials and products. It can be applicable to polymers in powder form under appropriate conditions, depending on the agreement between the interested parties. This document does not apply to PVC compounds in the form of dry blends, since such materials might not be sufficiently homogeneous. This document does not apply to PVC compounds and products which evolve other decomposition products, in addition to hydrogen chloride, at elevated temperatures that can affect the conductivity of water when they are absorbed into it. NOTE In this case, ISO 182-4 [2] provides the suitable method for the determination of chloride ion (Cl−) in the absorbing solution. This document can also be applied to other plastics materials which can evolve hydrogen chloride or other hydrogen halides when heated under the conditions prescribed by the relevant specifications, or as agreed upon between the interested parties.
- Standard18 pagesEnglish languagesale 15% off
- Standard19 pagesFrench languagesale 15% off
This document specifies the general “design for recycling” guidelines for EPS raw materials. It provides guidance on the impact of specific design characteristics on the recyclability of the product in practice and recommended design options to ensure that the product is recyclable, including target values and performance ranges, where applicable. It also provides a definition of recyclable product and of design for recycling.
This document refers to EPS thermal insulation products but may be used for other EPS construction products where appropriate.
This document refers to the recycling processes of EPS insulation products. The sorting and collecting steps are not part of this document.
This document takes into account all currently known recycling processes that are suitable to enable the circular economy for insulation materials. Particular attention is paid to ensuring that the most energy-efficient processes are given preference, especially mechanical recycling.
For some of these processes, practical experience has been gained over many years, so a basic knowledge base for the development of a guideline is already available.
At the same time, it is important to also take into account future-oriented processes, for which at the moment little but increasing experience is available or which have so far only been implemented on a small scale.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides characteristics and typical values for poly(ethylene terephthalate) (PET) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in the Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides characteristics and typical values for poly(vinyl chloride) (PVC) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides characteristics and typical values for acrylonitrile-butadiene-styrene (ABS) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides characteristics and typical values for polystyrene (PS) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides characteristics and typical values for polyethylene (PE) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides characteristics and typical values for polypropylene (PP) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the main characteristics and associated test methods for assessing of polyethylene (PE) recyclates intended for use in the production of semi-finished or finished products.
It is intended to support parties involved in the use of PE recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides characteristics and typical values for polypropylene (PP) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard25 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides characteristics and typical values for polystyrene (PS) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of relevant properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard34 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides characteristics and typical values for poly(vinyl chloride) (PVC) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides characteristics and typical values for polyethylene (PE) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard28 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides characteristics and typical values for acrylonitrile-butadiene-styrene (ABS) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer’s defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides characteristics and typical values for poly(ethylene terephthalate) (PET) recyclates intended for groups of defined applications (the product families).
The characteristics and typical values for the different product families are derived from the performance requirements of the products belonging to that family, including requirements for product manufacturing processes where applicable.
This document applies to plastic recyclates intended to be used for the manufacturing of (intermediate) products.
This document is intended to be used in conjunction with part 1 of this standard series, which describes the designation system for plastic recyclates. The designation system allows comparison between recycled and virgin material at the level of the polymer's defined designatory properties.
NOTE 1 Examples of designations of plastic recyclates are given in the Annex A.
NOTE 2 The selection of properties for a product family is based on EN ISO 10350 1, extended with specific properties related to plastic recyclates.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the main characteristics and associated test methods for assessing of polyethylene (PE) recyclates intended for use in the production of semi-finished or finished products.
It is intended to support parties involved in the use of PE recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the main characteristics and associated test methods for assessing of polypropylene (PP) recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of PP recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastic wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the main characteristics and associated test methods for assessing of polystyrene (PS) recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of PS recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the quality grades for sorted poly(ethylene terephtalate) (PET) wastes as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. PET waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The document provides for a division of information between “Required Data”, where a statement is required, and additional “Optional Data” as agreed between the supplying and receiving party.
This document does not apply to the general characterization addressed in EN 15347-1.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the quality grades for sorted poly(vinyl chloride) (PVC) wastes as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. PVC waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The document provides for a division of information between “Required Data”, where a statement is required, and additional “Optional Data” as agreed between the supplying and receiving party.
This document does not apply to the general characterization addressed in EN 15347-1.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the quality grades for sorted polystyrene (PS) wastes as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. PS waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The document provides for a division of information between “Required Data”, where a statement is required, and additional “Optional Data” as agreed between the supplying and receiving party.
This document does not apply to the general characterization addressed in EN 15347-1.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the quality grades for sorted polypropylene (PP) wastes as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. Polypropylene waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The document provides for a division of information between “Required Data”, where a statement is required, and additional “Optional Data” as agreed between the supplying and receiving party.
This document does not apply to the general characterization addressed in EN 15347-1.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the quality grades for sorted Polyethylene (PE) wastes as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. Polyethylene waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The document provides for a division of information between “Required Data”, where a statement is required, and additional “Optional Data” as agreed between the supplying and receiving party.
This document does not apply to the general characterization addressed in EN 15347-1.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the main characteristics and associated test methods for assessing of polypropylene (PP) recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of PP recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastic wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the main characteristics and associated test methods for assessing of polystyrene (PS) recyclates intended for use in the production of semi-finished/finished products.
It is intended to support parties involved in the use of PS recyclates to agree on specifications for specific and generic applications.
This document does not cover the characterization of plastics wastes, which is covered by the EN 15347 series, neither traceability topics which are covered by EN 15343.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the minimum values for expected strength as a function of time and temperature in the form of reference lines, for use in calculations on polysulfone (PSU) injection moulded fittings. This document is applicable for polysulfone homopolymer compounds only.
- Standard10 pagesEnglish languagesale 15% off
This document specifies the minimum values for expected strength as a function of time and temperature in the form of reference lines, for use in calculations on polyvinylidene fluoride (PVDF) homopolymer extruded pipes and injection moulded fittings.
- Standard10 pagesEnglish languagesale 15% off
This document specifies the quality grades for sorted poly(vinyl chloride) (PVC) wastes as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. PVC waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The document provides for a division of information between “Required Data”, where a statement is required, and additional “Optional Data” as agreed between the supplying and receiving party.
This document does not apply to the general characterization addressed in EN 15347-1.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the quality grades for sorted polypropylene (PP) wastes as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. Polypropylene waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The document provides for a division of information between “Required Data”, where a statement is required, and additional “Optional Data” as agreed between the supplying and receiving party.
This document does not apply to the general characterization addressed in EN 15347-1.
- Standard13 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the quality grades for sorted polystyrene (PS) wastes as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. PS waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The document provides for a division of information between “Required Data”, where a statement is required, and additional “Optional Data” as agreed between the supplying and receiving party.
This document does not apply to the general characterization addressed in EN 15347-1.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the quality grades for sorted Polyethylene (PE) wastes as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. Polyethylene waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The document provides for a division of information between “Required Data”, where a statement is required, and additional “Optional Data” as agreed between the supplying and receiving party.
This document does not apply to the general characterization addressed in EN 15347-1.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the quality grades for sorted poly(ethylene terephtalate) (PET) wastes as well as specific test methods laying out those properties for which the supplying party of the waste makes information available to the receiving party. PET waste quality grades are based on pre-determined sets of characteristics, taking into account sectorial and market specificities and related information needs and tests methods. The document provides for a division of information between “Required Data”, where a statement is required, and additional “Optional Data” as agreed between the supplying and receiving party.
This document does not apply to the general characterization addressed in EN 15347-1.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies three methods for the determination of the ash of poly(vinyl chloride).
The general procedures given in ISO 3451-1 are followed. For ash, method A is used. For sulfated ash, methods B and C are used. All three methods are applicable to resins, compounds and finished products. Methods B and C are applicable when lead-containing compounds are present.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies two methods for the determination of co-monomer contents of polyethylene products by solution state 13C-NMR spectrometry (nuclear magnetic resonance spectrometry): — Method A: inverse gated decoupling method; — Method B: insensitive nuclei enhanced by polarization transfer method. This document is applicable to copolymers of ethylene having a content of other 1-olefinic monomers of less than a mass fraction of 50 %. This document is not applicable to ethylene homopolymers or copolymers in which ethylene is polymerized with two or more type 1-olefin comonomers.
- Standard28 pagesEnglish languagesale 15% off
This document specifies a test method for the estimation of the short chain branching distribution of semicrystalline ethylene 1-olefin copolymers by successive self-nucleation and annealing (SSA) with conventional, high performance and fast differential scanning calorimetry. This document is applicable to the estimation of the short chain branching distribution of raw materials of semicrystalline ethylene 1-olefin copolymers and its products. Quantitative calculation of short chain branching content, degree of crystallinity and short chain branching distribution is applicable to ethylene/1-butene copolymers, ethylene/1-hexene copolymers and ethylene/1-octene copolymers.
- Standard20 pagesEnglish languagesale 15% off
This document specifies three methods for the determination of the ash of poly(vinyl chloride).
The general procedures given in ISO 3451-1 are followed. For ash, method A is used. For sulfated ash, methods B and C are used. All three methods are applicable to resins, compounds and finished products. Methods B and C are applicable when lead-containing compounds are present.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies three methods for the determination of the ash of poly(vinyl chloride). The general procedures given in ISO 3451-1 are followed. For ash, method A is used. For sulfated ash, methods B and C are used. All three methods are applicable to resins, compounds and finished products. Methods B and C are applicable when lead-containing compounds are present.
- Standard8 pagesEnglish languagesale 15% off
- Standard8 pagesFrench languagesale 15% off
This document specifies a method for determining the effect of heat on unplasticized poly(vinyl chloride) (PVC-U) profiles, to be carried out in air at 150 °C.
It is also applicable to PVC-based profiles at specified temperatures/test conditions.
- Standard5 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for determining the effect of heat on unplasticized poly(vinyl chloride) (PVC-U) profiles, to be carried out in air at 150 °C.
It is also applicable to PVC-based profiles at specified temperatures/test conditions.
- Standard5 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines test procedures for the acquisition and presentation of comparable data for moulding materials. This document applies predominantly to unreinforced and reinforced thermoplastic and thermosetting materials that can be injection- or compression-moulded or prepared as sheets of specified thickness.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This document establishes a system of designation for thermoplastic polyurethane elastomers. The designation system can be used as the basis for specifications. The designation system is applicable to all thermoplastic polyurethane elastomers. It applies to materials ready for normal use in the form of powder, granules or pellets, unmodified or modified by colourants, fillers or other additives, etc. This document does not intend to imply that materials having the same designation give necessarily the same performance. This document does not provide engineering data, performance data, or data on processing conditions which might be required to specify a material for a particular application and/or method of processing. NOTE If such additional properties are required, they can be determined according to the test methods specified in ISO 16365-2, if suitable.
- Standard8 pagesEnglish languagesale 15% off
This document defines test procedures for the acquisition and presentation of comparable data for moulding materials. This document applies predominantly to unreinforced and reinforced thermoplastic and thermosetting materials that can be injection- or compression-moulded or prepared as sheets of specified thickness.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This document defines test procedures for the acquisition and presentation of comparable data for moulding materials. This document applies predominantly to unreinforced and reinforced thermoplastic and thermosetting materials that can be injection- or compression-moulded or prepared as sheets of specified thickness.
- Standard10 pagesEnglish languagesale 15% off
- Standard11 pagesFrench languagesale 15% off
This document specifies the methods of preparation of test specimens and the test methods for determining the properties of polypropylene (PP) moulding and extrusion materials. It gives requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing.
This document specifies procedures and conditions for the preparation of test specimens, and procedures for measuring properties of the materials from which these specimens are made. Properties and test methods which are suitable and essential to characterize PP moulding and extrusion materials are listed.
The properties have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for, or of particular significance to PP moulding and extrusion materials are also included in this document, as are the designatory properties specified in ISO 19069-1.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the methods of preparation of test specimens and the test methods for determining the properties of polypropylene (PP) moulding and extrusion materials. It gives requirements for handling test material and for conditioning both the test material before moulding and the specimens before testing.
This document specifies procedures and conditions for the preparation of test specimens, and procedures for measuring properties of the materials from which these specimens are made. Properties and test methods which are suitable and essential to characterize PP moulding and extrusion materials are listed.
The properties have been selected from the general test methods in ISO 10350-1. Other test methods in wide use for, or of particular significance to PP moulding and extrusion materials are also included in this document, as are the designatory properties specified in ISO 19069-1.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day