SIST EN IEC 60704-2-3:2025

SLOVENSKI STANDARD
01-november-2025
Nadomešča:
SIST EN 60704-2-3:2019
SIST EN 60704-2-3:2019/A11:2019
Gospodinjski in podobni električni aparati - Preskuševalni kod za ugotavljanje
zvočnega hrupa v zraku - 2-3. del: Posebne zahteve za pomivalne stroje (IEC 60704
-2-3:2025)
Household and similar electrical appliances - Test code for the determination of airborne
acoustical noise - Part 2-3: Particular requirements for dishwashers (IEC 60704-2-
3:2025)
Elektrische Geräte für den Hausgebrauch und ähnliche Zwecke - Prüfvorschrift für die
Bestimmung der Luftschallemission - Teil 2-3: Besondere Anforderungen für
Geschirrspülmaschinen (IEC 60704-2-3:2025)
Appareils électrodomestiques et analogues - Code d'essai pour la détermination du bruit
aérien - Partie 2-3: Exigences particulières pour les lave-vaisselle (IEC 60704-2-3:2025)
Ta slovenski standard je istoveten z: EN IEC 60704-2-3:2025
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
97.040.40 Pomivalni stroji Dishwashers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60704-2-3

NORME EUROPÉENNE
EUROPÄISCHE NORM September 2025
ICS 97.040.40; 17.140.20 Supersedes EN 60704-2-3:2019; EN 60704-2-
3:2019/A11:2019
English Version
Household and similar electrical appliances - Test code for the
determination of airborne acoustical noise - Part 2-3: Particular
requirements for dishwashers
(IEC 60704-2-3:2025)
Appareils électrodomestiques et analogues - Code d'essai Elektrische Geräte für den Hausgebrauch und ähnliche
pour la détermination du bruit aérien - Partie 2-3: Exigences Zwecke - Prüfvorschrift für die Bestimmung der
particulières pour les lave-vaisselle Luftschallemission - Teil 2-3: Besondere Anforderungen für
(IEC 60704-2-3:2025) Geschirrspülmaschinen
(IEC 60704-2-3:2025)
This European Standard was approved by CENELEC on 2025-07-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60704-2-3:2025 E

European foreword
The text of document 59A/272/FDIS, future edition 4 of IEC 60704-2-3, prepared by SC 59A "Electric
dishwashers" of IEC/TC 59 "Performance of household and similar electrical appliances" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60704-2-3:2025.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2026-09-30
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2028-09-30
document have to be withdrawn
This document supersedes EN 60704-2-3:2019 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 60704-1:2021.
This document has been prepared under a standardization request addressed to CENELEC by the
European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Member States.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60704-2-3:2025 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Addition:
Publication Year Title EN/HD Year
IEC 60436 2025 Electric dishwashers for household use - EN IEC 60436 2025
Methods for measuring the performance

+ A11 2025
IEC 60704-2-3 ®
Edition 4.0 2025-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Test code for the determination of
airborne acoustical noise –
Part 2-3: Particular requirements for dishwashers

Appareils électrodomestiques et analogues – Code d'essai pour la détermination
du bruit aérien –
Partie 2-3: Exigences particulières pour les lave-vaisselle
ICS 97.040.40, 17.140.20 ISBN 978-2-8327-0446-2

IEC 60704-2-3:2025-06(en-fr)
– 2 – IEC 60704-2-3:2025 © IEC 2025
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Measurement methods and acoustical environments . 7
6 Operation and location of appliances under test . 8
7 Measurement of sound pressure levels . 10
9 Information to be recorded . 11
10 Information to be reported . 11
Annex A (normative) Standard test table . 12
Annex B (normative) Test enclosure . 13

Table 1 – Standard deviations of sound power levels . 7
Table 2 – Standard deviations for declaration and verification . 7

IEC 60704-2-3:2025 © IEC 2025 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES – TEST CODE
FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE –

Part 2-3: Particular requirements for dishwashers

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement this document. However, implementers are cautioned that this may not represent
the latest information, which may be obtained from the patent database available at https://patents.iec.ch. IEC
shall not be held responsible for identifying any or all such patent rights.
IEC 60704-2-3 has been prepared by subcommittee 59A: Electric dishwashers, of IEC technical
committee 59: Performance of household and similar electrical appliances. It is an International
Standard.
This fourth edition cancels and replaces the third edition published in 2017. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) alignment to IEC 60704-1:2021,
b) change of the position of the test sample in the test enclosure (aligned to
IEC 60704-1:2021),
– 4 – IEC 60704-2-3:2025 © IEC 2025
c) detergent changed (aligned to IEC 60436:2025).
The text of this International Standard is based on the following documents:
Draft Report on voting
59A/272/FDIS 59A/275/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/publications.
This International Standard is intended to be used in conjunction with the fourth edition of
IEC 60704-1:2021.
This document supplements or modifies the corresponding clauses in IEC 60704-1:2021, so as
to establish the test code for dishwashers. When a particular subclause of IEC 60704-1:2021
is not mentioned in this Part 2-3, that subclause is applicable as far as reasonable. Where this
standard states "addition", "modification" or "replacement", the relevant requirements, test
specifications or explanatory matter in IEC 60704-1:2021 should be adapted accordingly.
Subclauses, tables and figures that are numbered starting from 101 are additional to those in
IEC 60704-1:2021.
Unless notes are in a new subclaus
...