kSIST FprEN IEC 61340-4-11:2024

SLOVENSKI STANDARD
oSIST prEN IEC 61340-4-11:2024
01-februar-2024
Elektrostatika - 4-11. del: Standardne preskusne metode za posebno uporabo -
Preskušanje elektrostatičnih lastnosti kompozitnih IBC
Electrostatics - Part 4-11: Standard test methods for specific applications - Testing of
electrostatic properties of composite IBC
Ta slovenski standard je istoveten z: prEN IEC 61340-4-11:2023
ICS:
17.220.99 Drugi standardi v zvezi z Other standards related to
elektriko in magnetizmom electricity and magnetism
55.080 Vreče. Vrečke Sacks. Bags
oSIST prEN IEC 61340-4-11:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 61340-4-11:2024

oSIST prEN IEC 61340-4-11:2024
101/698/CDV
COMMITTEE DRAFT FOR VOTE (CDV)

PROJECT NUMBER:
IEC 61340-4-11 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-11-24 2024-02-16
SUPERSEDES DOCUMENTS:
101/673C/CC, 101/694/CC
IEC TC 101 : ELECTROSTATICS
SECRETARIAT: SECRETARY:
Germany Mr Hartmut Berndt
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In So me Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Electrostatics - Part 4-11: Standard test methods for specific applications - Testing of electrostatic
properties of composite IBC
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

oSIST prEN IEC 61340-4-11:2024

IEC CDV 61340-4-11 © IEC 2023 – 2 – 101/698/CDV

2 CONTENTS
4 FOREWORD . 4
5 INTRODUCTION . 6
6 1 Scope . 7
7 2 Normative references . 7
8 3 Terms and definitions . 7
9 4 Electrical resistance measurements . 8
10 4.1 Atmosphere for conditioning and testing . 8
11 4.2 Apparatus . 8
12 4.2.1 Instrumentation for measuring surface resistance and resistance to earth . 8
13 4.2.2 Instrumentation for measuring earth continuity resistance . 9
14 4.2.3 Electrode assembly for measuring surface resistance and resistance to earth of
15 inner receptacles . 9
16 4.3 Test procedures . 13
17 4.3.1 Surface resistance . 13
18 4.3.2 Resistance to earth of inner receptacle . 15
19 4.3.3 Resistance to earth of liquid in the inner receptacle . 16
20 4.3.4 Earth continuity resistance . 17
21 4.4 Test report . 18
22 5 Tests . 19
23 5.1 Tests on new composite IBC . 19
24 5.1.1 General . 19
25 5.1.2 Tests of new conductively encased composite IBC with insulating inner
26 receptacle . 19
27 5.1.3 Tests on new coated and coextruded composite IBC. 19
28 5.2 Tests on composite IBC after the first filling . 20
29 5.2.1 Requirements for periodic examination and testing . 20
30 5.2.2 Tests of conductively encased composite IBC with insulating inner receptacle20
31 5.2.3 Tests on coated and coextruded composite IBC . 20
32 5.2.4 Tests on reconditioned composite IBC . 20
33 6 Test report/documentation . 21
34 Annex A (informative/normative)  . 23
35 A.1 Example of a test report sheet . 23
36 A.2 Safety labels . 25
37 Bibliography . 26
oSIST prEN IEC 61340-4-11:2024

IEC CDV 61340-4-11 © IEC 2023 – 3 – 101/698/CDV

41 Figure 1 – Example of an electrode assembly for laboratory evaluations and acceptance testing
42 ………………………………………………………………………………………………………….11
43 Figure 2 – Example of a contact/support disc with an articulated joint . 12
44 Figure 3 – Operation of the push-rod handle: relaxed position (left) and measuring position
45 (right) . 12
46 (a) – Example showing positioning of the electrode assembly for measuring surface resistance
47 on top of an inner receptacle . 14
48 (b) - Example showing positioning of the electrode assembly for measuring surface resistance
49 on a side of an inner receptacle . 14
50 (c) - Example showing positioning of the electrode assembly for measuring surface resistance
51 on a corner of an inner receptacle . 15
52 Figure 4 – Test procedures for measuring surface resistance . 15
53 Figure 5 – Test procedure for measuring resistance to earth of an inner receptacle . 16
54 Figure 6 – Test procedure for measuring resistance to earth of liquid in an inner receptacle 17
55 Figure 7 – Test procedure for measuring earth continuity resistance . 18
oSIST prEN IEC 61340-4-11:2024

IEC CDV 61340-4-11 © IEC 2023 – 4 – 101/698/CDV

58 INTERNATIONAL ELECTROTECHNICAL COMMISSION
59 ____________
61 ELECTROSTATICS –
63 Part 4-11: Standard test methods for specific applications – Testing of
64 electrostatic properties of composite IBC
66 FOREWORD
67 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
68 electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all
69 questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities ,
70 IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS)
71 and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC
72 National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental
73 and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with
74 the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between
75 the two organizations.
76 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus
77 of opinion on the relevant subjects since each technical committee has representation from all interested IEC National
78 Committees.
79 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in
80 that sense. While all reasonable efforts are made to ensure that the technical content o f IEC Publications is accurate, IEC
81 cannot be held responsible for the way in which they are used or for any misinterpretation by any end user.
82 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications tra nsparently to
83 the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and
84 the corresponding national or regional publication shall be clearly indicated in the latter.
85 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment
86 services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by
87 independent certification bodies.
88 6) All users should ensure that they have the latest edition of this publication.
89 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of
90 its technical committees and IEC National Committees for any personal injury, property damage or other damage of any
91 nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publicatio n,
92 use of, or reliance upon, this IEC Publication or any other IEC Publications.
93 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable
94 for the correct application of this publication.
95 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights.
96 IEC shall not be held responsible for identifying any or all such patent rights.
97 International Standard IEC 61340-4-11 has been prepared by IEC technical committee 101:
98 Electrostatics.
99 The text of this International Standard is based on the following documents:
FDIS Report on voting
XX/XX/FDIS XX/XX/RVD
101 Full information on the voting for the approval of this International Standard can be found in the report
102 on voting indicated in the above table.
103 This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

oSIST prEN IEC 61340-4-11:2024

IEC CDV 61340-4-11 © IEC 2023 – 5 – 101/698/CDV

104 The committee has decided that the contents of this document will remain unchanged until the stability
105 date indicated on the IEC website under "http://webstore.iec.ch" in the data related to the specific
106 document. At this date, the document will be
107 • reconfirmed,
108 • withdrawn,
109 • replaced by a revised edition, or
110 • amended.
112 The National Committees are requested to note that for this document the stability date is 20XX.
113 THIS TEXT IS INCLUDED FOR THE INFORMATION OF THE NATIONAL COMMITTEES AND WILL BE DELETED AT THE
114 PUBLICATION STAGE.
oSIST prEN IEC 61340-4-11:2024

IEC CDV 61340-4-11 © IEC 2023 – 6 – 101/698/CDV

116 INTRODUCTION
117 Rigid Intermediate Bulk Containers (RIBC), including composite IBC, are widely used for storage,
118 transportation and handling of liquids.
119 Only composite IBC are considered in this part of IEC 61340. The detailed definition of composite IBC
120 is specified in clause 6.5.1.3.4 of the Reference [1] . Composite IBC with plastic inner receptacles
121 comprise a rigid outer casing surrounding a plastic inner receptacle, together with appropriate
122 service and structural equipment. The assembled outer casing and inner receptacle form an
123 integral unit for filling, storage, transportation and emptying.
124 The inner receptacle is not intended to perform a containment function without its outer casing. A “rigid”
125 inner receptacle is a receptacle which retains its general shape when empty without closures in place
126 and without benefit of the outer casing. Any inner receptacle that is not “rigid” is conside red to be
127 “flexible” (see paragraph 6
...