SIST EN ISO 15614-12:2004
(Main)Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2004)
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2004)
This standard specifies the tests which may be used for qualification of welding procedure specifications for spot, seam and projection welding processes.
This standard is part of a series of standards. Details of this series are given in EN ISO 15607:2003, annex A.
This standard defines the conditions for carrying out tests and the limits of validity of a qualified welding procedure for all practical welding operations covered by this standard.
The tests required to qualify the procedure for a particular component/assembly depend on the performance and quality requirements of the component/assembly and shall be established before any qualification is undertaken.
Tests shall be carried out in accordance with this standard unless more severe tests are specified by the relevant application standard or contract when these shall apply.
The acceptability of applying the principles of the standard to other resistance welding processes should be established before any qualification is undertaken.
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Schweißverfahrensprüfung - Teil 12: Widerstandspunkt-, Rollennaht- und Buckelschweißen (ISO 15614-12:2004)
Diese Norm legt fest, wie eine Schweißanweisung durch Schweißverfahrensprüfungen anerkannt wird.
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Epreuve de qualification d'un mode opératoire de soudage - Partie 12: Soudage par points, a la molette et par bossages (ISO 15614-12:2004)
La présente norme spécifie les épreuves qui peuvent etre utilisées pour la qualification de descriptifs de modes opératoires de soudage.
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Preskus postopka varjenja - 12. del: Točkovno, kolutno in projekcijsko varjenje (ISO 15614-12:2004)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 15614-12:2004
01-november-2004
3RSLVLQNYDOLILNDFLMDYDULOQLKSRVWRSNRY]DNRYLQVNHPDWHULDOH3UHVNXVSRVWRSND
YDUMHQMDGHO 7RþNRYQRNROXWQRLQSURMHNFLMVNRYDUMHQMH ,62
Specification and qualification of welding procedures for metallic materials - Welding
procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2004)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Schweißverfahrensprüfung - Teil 12: Widerstandspunkt-, Rollennaht- und
Buckelschweißen (ISO 15614-12:2004)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Epreuve de qualification d'un mode opératoire de soudage - Partie 12:
Soudage par points, a la molette et par bossages (ISO 15614-12:2004)
Ta slovenski standard je istoveten z: EN ISO 15614-12:2004
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 15614-12:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 15614-12:2004
------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.