SIST EN ISO 9013:2017/A1:2024
(Amendment)Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Amendment 1 (ISO 9013:2017/Amd 1:2024)
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Amendment 1 (ISO 9013:2017/Amd 1:2024)
Thermisches Schneiden - Einteilung thermischer Schnitte - Geometrische Produktspezifikation und Qualität - Änderung 1 (ISO 9013:2017/Amd 1:2024)
Coupage thermique - Classification des coupes thermiques - Spécification géométrique des produits et tolérances relatives à la qualité - Amendement 1 (ISO 9013:2017/Amd 1:2024)
Toplotno rezanje - Razvrstitev toplotnih rezov - Geometrijska specifikacija izdelkov in tolerance kakovosti - Dopolnilo A1 (ISO 9013:2017/Amd 1:2024)
General Information
Relations
Overview
EN ISO 9013:2017/A1:2024 is Amendment 1 to ISO 9013:2017 - the international standard for thermal cutting that defines the classification of thermal cuts and the associated geometrical product specification (GPS) and quality tolerances. Published as a CEN-endorsed amendment in 2024, it updates normative references and aligns surface texture requirements with the newer ISO GPS series for profile surface texture.
Key factual points:
- Amendment modifies EN ISO 9013:2017 without other technical changes.
- Approved by CEN on 16 April 2024 and to be implemented by CEN members (national adoption deadline March 2025).
- Prepared by ISO/TC 44 (Welding and allied processes) in collaboration with CEN/TC 121.
Key topics and technical changes
This amendment focuses on updating references related to surface texture and indication within the GPS framework:
- Removes the reference to withdrawn ISO 1302:2002.
- Replaces references to withdrawn ISO 4288 with ISO 21920-3: Geometrical product specifications (GPS) - Surface texture: Profile - Part 3: Specification operators.
- Updates clause cross-references: clauses 6.2.2.3, 6.2.3 and 10.2.1 now reference ISO 21920-3 or ISO 21920-1 as applicable.
- Adds ISO 21920-1 (Surface texture: Profile - Part 1: Indication of surface texture) to the bibliography.
What this means practically:
- Surface texture measurement terminology and indication methods in ISO 9013 are now consistent with the latest GPS profile standards (ISO 21920 series).
- Quality tolerances and specification operators for thermal cutting will reference current GPS methods rather than withdrawn standards.
Applications and users
EN ISO 9013 (with Amendment 1) is used by professionals and organizations involved in thermal cutting and downstream processes where cut geometry and surface quality matter:
- Welding and cutting shops, plate and structural fabricators
- Welding engineers, quality control and inspection personnel
- Designers and procurement specialists specifying cut tolerances and surface requirements
- Equipment manufacturers for oxy-fuel, plasma, laser and other thermal cutting systems
- Certification bodies and standards committees implementing GPS-based surface specification
Practical uses:
- Specifying acceptable cut classes and tolerances on drawing notes and contracts
- Defining surface texture and profile acceptance criteria for post-cut fabrication or welding
- Harmonizing inspection procedures with up-to-date GPS standards
Related standards
- ISO 9013:2017 (base standard - Thermal cutting, classification and tolerances)
- ISO 21920-1 (Surface texture: Profile - Indication of surface texture)
- ISO 21920-3 (Surface texture: Profile - Specification operators)
Keywords: EN ISO 9013:2017/A1:2024, thermal cutting, classification of thermal cuts, geometrical product specification, GPS, surface texture, quality tolerances, ISO 21920, welding processes.
Frequently Asked Questions
SIST EN ISO 9013:2017/A1:2024 is a amendment published by the Slovenian Institute for Standardization (SIST). Its full title is "Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Amendment 1 (ISO 9013:2017/Amd 1:2024)". This standard covers: Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Amendment 1 (ISO 9013:2017/Amd 1:2024)
Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Amendment 1 (ISO 9013:2017/Amd 1:2024)
SIST EN ISO 9013:2017/A1:2024 is classified under the following ICS (International Classification for Standards) categories: 17.040.20 - Properties of surfaces; 17.040.30 - Measuring instruments; 25.160.10 - Welding processes. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 9013:2017/A1:2024 has the following relationships with other standards: It is inter standard links to SIST EN ISO 9013:2017. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase SIST EN ISO 9013:2017/A1:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Toplotno rezanje - Razvrstitev toplotnih rezov - Geometrijska specifikacija izdelkov
in tolerance kakovosti - Dopolnilo A1 (ISO 9013:2017/Amd 1:2024)
Thermal cutting - Classification of thermal cuts - Geometrical product specification and
quality tolerances - Amendment 1 (ISO 9013:2017/Amd 1:2024)
Thermisches Schneiden - Einteilung thermischer Schnitte - Geometrische
Produktspezifikation und Qualität - Änderung 1 (ISO 9013:2017/Amd 1:2024)
Coupage thermique - Classification des coupes thermiques - Spécification géométrique
des produits et tolérances relatives à la qualité - Amendement 1 (ISO 9013:2017/Amd
1:2024)
Ta slovenski standard je istoveten z: EN ISO 9013:2017/A1:2024
ICS:
17.040.20 Lastnosti površin Properties of surfaces
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 9013:2017/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2024
EUROPÄISCHE NORM
ICS 25.160.10
English Version
Thermal cutting - Classification of thermal cuts -
Geometrical product specification and quality tolerances -
Amendment 1 (ISO 9013:2017/Amd 1:2024)
Coupage thermique - Classification des coupes Thermisches Schneiden - Einteilung thermischer
thermiques - Spécification géométrique des produits et Schnitte - Geometrische Produktspezifikation und
tolérances relatives à la qualité - Amendement 1 (ISO Qualität - Änderung 1 (ISO 9013:2017/Amd 1:2024)
9013:2017/Amd 1:2024)
This amendment A1 modifies the European Standard EN ISO 9013:2017; it was approved by CEN on 16 April 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9013:2017/A1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 9013:2017/A1:2024) has been prepared by Technical Committee ISO/TC 44
"Welding and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and
allied processes” the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 9013:2017 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2025, and
conflicting national standards shall be withdrawn at the latest by March 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 9013:2017/Amd 1:2024 has been approved by CEN as EN ISO 9013:2017/A1:2024
without any modification.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...