SIST EN 1592-1:1998
(Main)Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery
Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery
This part of EN 1592 specifies the technical conditions for inspection and delivery of HF seam welded aluminium tubes. It is applicable to HF seam welded tubes obtained by forming cold-rolled strips. It is applicable to aluminium tubes produced from uncoated aluminium strip, as well as to tubing that is pre-lacquered, pre-painted or pre-anodized prior to forming.
Aluminium und Aluminiumlegierungen - HF-längsnahtgeschweißte Rohre - Teil 1: Technische Lieferbedingungen
Dieser Teil von prEN 1592 legt die technischen Lieferbedingungen für HF- längsnahtgeschweißte Aluminiumrohre fest. Er gilt für HF- längsnahtgeschweißte Rohre, die durch Formgebung aus Kaltwalzband hergestellt werden. Er gilt sowohl für Aluminiumrohre, die aus unbeschichtetem Aluminiumband hergestellt werden, als auch für Aluminiumrohre aus vorlackiertem, vorbeschichtetem oder voranodisiertem Walzband.
Aluminium et alliages d'aluminium - Tubes électrosoudés HF - Partie 1: Conditions techniques de contrôle et de livraison
La présente partie du prEN 1592 spécifie les conditions techniques de contrôle et de livraison des tubes électrosoudés HF en aluminium. Elle s'applique aux tubes électrosoudés HF obtenus par formage de bandes laminées à froid. Elle s'applique aux tubes en aluminium fabriqués à partir de bande en aluminium non revêtue ainsi qu'aux tubes qui sont pré-laqués, pré-peints ou pré-anodisés avant leur formage.
Aluminij in aluminijeve zlitine - VF varjene cevi - 1. del: Tehnični pogoji za prevzem in dobavo
General Information
- Status
- Published
- Publication Date
- 31-Oct-1998
- Technical Committee
- INEK - Nonferrous metals
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Nov-1998
- Due Date
- 01-Nov-1998
- Completion Date
- 01-Nov-1998
Overview
EN 1592-1:1997 (CEN) - Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery defines the technical conditions governing inspection and delivery of high-frequency (HF) seam welded aluminium tubes. The standard applies to HF seam welded tubes produced by forming cold-rolled aluminium strips, and it covers tubes made from uncoated, pre-lacquered, pre-painted or pre-anodized strip prior to forming.
Key Topics
This part of EN 1592 focuses on the technical conditions relevant to ensuring consistent product quality and clear contractual delivery terms. Typical topics and requirements addressed include:
- Scope of applicability for HF seam welded aluminium tubes formed from cold‑rolled strip
- Inspection and acceptance criteria to verify conformity at delivery
- Conditions for delivery and documentation that buyers and sellers should agree upon
- Surface condition and pre-treatment considerations for uncoated, pre-lacquered, pre-painted and pre-anodized strip
- Marking, packaging and transport practices associated with delivery (as part of inspection/delivery conditions)
(These subjects reflect the standard’s purpose to set technical conditions for inspection and delivery rather than dimensional or alloy-specific chemistry details.)
Applications
EN 1592-1 is useful wherever HF seam welded aluminium tubes are specified and procured. Common practical applications include:
- Procurement and quality control by aluminium tube manufacturers and suppliers
- Specification writing by engineers, architects and project managers
- Purchase contracts and technical tenders for industries using aluminium tubing
- Quality assurance, incoming inspection and acceptance procedures in fabrication shops
Because the standard explicitly covers tubes formed from pre-treated strip (lacquered/painted/anodized), it is particularly relevant when surface finish and pre-treatment must be preserved through forming and welding processes.
Who Should Use This Standard
- Aluminium tube producers and process engineers
- Purchasers and procurement teams specifying HF seam welded tubes
- Quality managers and inspectors responsible for delivery acceptance
- Designers and specifiers requiring clear inspection/delivery criteria in contracts
Related Standards
EN 1592-1:1997 should be used alongside other CEN standards and product-specific specifications for aluminium alloys, welding, and tube dimensions when detailed mechanical, chemical or dimensional requirements are needed.
Keywords: EN 1592-1, HF seam welded aluminium tubes, technical conditions, inspection and delivery, cold-rolled strip, pre-lacquered, pre-painted, pre-anodized, CEN.
Frequently Asked Questions
SIST EN 1592-1:1998 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery". This standard covers: This part of EN 1592 specifies the technical conditions for inspection and delivery of HF seam welded aluminium tubes. It is applicable to HF seam welded tubes obtained by forming cold-rolled strips. It is applicable to aluminium tubes produced from uncoated aluminium strip, as well as to tubing that is pre-lacquered, pre-painted or pre-anodized prior to forming.
This part of EN 1592 specifies the technical conditions for inspection and delivery of HF seam welded aluminium tubes. It is applicable to HF seam welded tubes obtained by forming cold-rolled strips. It is applicable to aluminium tubes produced from uncoated aluminium strip, as well as to tubing that is pre-lacquered, pre-painted or pre-anodized prior to forming.
SIST EN 1592-1:1998 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1592-1:1998 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 1592-1:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - HF-längsnahtgeschweißte Rohre - Teil 1: Technische LieferbedingungenAluminium et alliages d'aluminium - Tubes électrosoudés HF - Partie 1: Conditions techniques de contrôle et de livraisonAluminium and aluminium alloys - HF seam welded tubes - Part 1: Technical conditions for inspection and delivery77.150.10Aluminijski izdelkiAluminium
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...