iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 22488:2011

(Main)

Ships and marine technology — Shipboard fire-fighters' outfits (protective clothing, gloves, boots and helmet)

Ships and marine technology — Shipboard fire-fighters' outfits (protective clothing, gloves, boots and helmet)

ISO 22488:2011 specifies the protective clothing, gloves, boots and helmet to be used by ships' crews in fighting fires on board ships. These outfits are appropriate for the fighting of small- to medium-magnitude fires, before the operation of any installed fixed fire-fighting systems, and are not intended or suitable for entry into flames.

Navires et technologie maritime — Équipement du marin pompier (vêtements de protection, gants, bottes et casque)

General Information

Status
Published
Publication Date
13-Jun-2011
ICS
13.340.10 - Protective clothing
47.020.99 - Other standards related to shipbuilding and marine structures
Technical Committee
ISO/TC 8/SC 1 - Maritime safety
Drafting Committee
ISO/TC 8/SC 1/WG 3 - Fire protection
Current Stage
9093 - International Standard confirmed
Completion Date
05-Feb-2024
Ref Project

Buy Standard

ISO 22488:2011 - Ships and marine technology -- Shipboard fire-fighters' outfits (protective clothing, gloves, boots and helmet)ISO 22488:2011 - Ships and marine technology -- Shipboard fire-fighters' outfits (protective clothing, gloves, boots and helmet)
PreviousNext
Standard
ISO 22488:2011 - Ships and marine technology -- Shipboard fire-fighters' outfits (protective clothing, gloves, boots and helmet)
English language
36 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 22488:2011ISO 22488:2011
PreviousNext
Standard
ISO 22488:2011
Russian language
50 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 22488
First edition
2011-06-15

Ships and marine technology —
Shipboard fire-fighters' outfits (protective
clothing, gloves, boots and helmet)
Navires et technologie maritime — Équipement du marin pompier
(vêtements de protection, gants, bottes et casque)




Reference number
ISO 22488:2011(E)
©
ISO 2011

---------------------- Page: 1 ----------------------
ISO 22488:2011(E)


COPYRIGHT PROTECTED DOCUMENT


©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2011 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 22488:2011(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
4 Design requirements.3
4.1 General .3
4.2 Protective clothing .4
4.3 Gloves.4
4.4 Boots.4
4.5 Helmets.4
5 Performance requirements and test methods for firefighter outfit components .5
5.1 General and sampling requirements .5
5.2 Protective clothing .5
5.3 Boots.7
5.4 Helmet.17
6 Additional requirements .25
6.1 Mass measurement .25
6.2 Donning test.25
6.3 Mobility tests.25
6.4 Retroreflective/fluorescent material tests.25
7 Care and maintenance instructions .25
8 Marking.25
8.1 General .25
Annex A (normative) Footwear designs .27
Annex B (normative) Mobility tests.
...

МЕЖДУНАРОДНЫЙ ISO
СТАНДАРТ 22488
Первое издание
2011-06-15


Суда и морские технологии. Бортовые
противопожарные комплекты
(защитная одежда, перчатки, обувь и
шлемы)
Ships and marine technology — Shipboard fire-fighters’ outfits
(protective clothing, gloves, boots and helmet)



Ответственность за подготовку русской версии несёт GOST R
(Российская Федерация) в соответствии со статьёй 18.1 Устава ISO

Ссылочный номер

ISO 22488:2011(R)
©
ISO 2011

---------------------- Page: 1 ----------------------
ISO 22488:2011(R)
Отказ от ответственности при работе в PDF
Настоящий файл PDF может содержать интегрированные шрифты. В соответствии с условиями лицензирования, принятыми
фирмой Adobe, этот файл можно распечатать или смотреть на экране, но его нельзя изменить, пока не будет получена
лицензия на установку интегрированных шрифтов в компьютере, на котором ведется редактирование. В случае загрузки
настоящего файла заинтересованные стороны принимают на себя ответственность за соблюдение лицензионных условий
фирмы Adobe. Центральный секретариат ISO не несет никакой ответственности в этом отношении.
Adobe - торговый знак Adobe Systems Incorporated.
Подробности, относящиеся к программным продуктам, использованным для создания настоящего файла PDF, можно найти в
рубрике General Info файла; параметры создания PDF оптимизированы для печати. Были приняты во внимание все меры
предосторожности с тем, чтобы обеспечить пригодность настоящего файла для использования комитетами – членами ISO. В
редких случаях возникновения проблемы, связанной со сказанным выше, просим информировать Центральный секретариат
по адресу, приведенному ниже.


ДОКУМЕНТ ЗАЩИЩЕН АВТОРСКИМ ПРАВОМ


©  ISO 2011
Все права сохраняются. Если не указано иное, никакую часть настоящей публикации нельзя копировать или использовать в
какой-либо форме или каким-либо электронным или механическим способом, включая фотокопии и микрофильмы, без
предварительного письменного согласия ISO по соответствующему адресу, указанному ниже, или комитета-члена ISO в стране
заявителя.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Опубликовано в Швейцарии

ii © ISO 2011 – Все права сохраняются

---------------------- Page: 2 ----------------------
ISO 22488:2011(R)
Оглавление Страница
Предисловие. iv
Введение . v
1 Область применения . 1
2 Нормативные ссылки . 1
3 Термины и определения . 2
4 Требования к проектированию . 4
4.1 Общие положения . 4
4.2 Защитная одежда . 4
4.3 Перчатки . 5
4.4 Обувь . 5
4.5 Шлемы . 5
5 Требования к характеристикам и методы испытаний для компонентов
противопожарных комплектов . 6
5.1 Общие положения и требования к отбору образцов . 6
5.2 Защитная одежда . 6
5.3 Обувь . 8
5.4 Шлем . 17
6 Дополнительные требования .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 7745:2024(Main)
Hydraulic fluid power — Fire-resistant fluids — Requirements and guidelines for use

This document specifies the operational characteristics for the various categories of fire-resistant fluids defined by ISO 6743-4. It includes requirements and guidelines for use of these fluids and specifies the factors to consider when selecting a fluid from these categories for a proposed application. This document identifies difficulties which can arise from the use of such fluids and indicates how they can be minimized. Procedures are given for replacing one fluid with another from a different category. Health and safety aspects when handling and disposing of fire-resistant fluids are also covered. This document does not apply to fire-resistant fluids used in the hydraulic systems of commercial or military aircraft.

  • Draft
    24 pages
    English language
    sale 15% off
  • Draft
    24 pages
    English language
    sale 15% off
ISO
ISO 5820:2024(Main)
Microbeam analysis — Hyper-dimensional data file specification (HMSA)

The MSA/MAS/AMAS hyper-dimensional data file specification (HMSA, for short) is a platform-independent data format to permit the exchange of hyper-dimensional microscopy and microanalytical data between different software applications. The applications include, but are not limited to: — Hyper-spectral maps, such as electron energy loss spectroscopy (EELS), energy dispersive x-ray spectrometry (XEDS), or cathodoluminescence spectroscopy (CL). — ‘Hyper-image’ maps, such as pattern maps using electron backscatter diffraction (EBSD) or convergent beam electron diffraction (CBED). — 3-dimensional maps, such as confocal microscopy, or focused ion beam (FIB) serial section maps. — 4-dimensional maps, such as double-tilt electron tomography. — Time-resolved microscopy and spectroscopy. In addition to storing hyper-dimensional data, the HMSA file format is applicable for storing conventional microscopy and microanalysis data, such as spectra, line profiles, images, and quantitative analyses, as well as experimental conditions and other metadata.

  • Draft
    78 pages
    English language
    sale 15% off
  • Draft
    78 pages
    English language
    sale 15% off
ISO
ISO 24173:2024(Main)
Microbeam analysis — Guidelines for orientation measurement using electron backscatter diffraction

This document gives guidance on how to generate reliable and reproducible crystallographic orientation measurements using electron backscatter diffraction (EBSD). It addresses the requirements for specimen preparation, instrument configuration, instrument calibration and data acquisition.

  • Draft
    43 pages
    English language
    sale 15% off
  • Draft
    43 pages
    English language
    sale 15% off
ISO
ISO 9319:2024(Main)
Traditional Chinese medicine — Poria cocos sclerotium

This document specifies the quality, safety requirements and test methods for Poria cocos sclerotium that is derived from the fungus Poria cocos (Schw.) Wolf. It is applicable to Poria cocos sclerotium sold and used as natural medicines in international trade, including Chinese materia medica (whole medicinal materials) and decoction pieces.

  • Draft
    14 pages
    English language
    sale 15% off
  • Draft
    14 pages
    English language
    sale 15% off
ISO
ISO 7921:2024(Main)
Ophthalmic optics and instruments — Near reading charts

This document applies to printed, projected, and electronic displays of high-contrast text that are designed for assessment and measurement of near reading acuity under photopic conditions. The definitions and requirements of this document apply to the Latin alphabet.

  • Draft
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off
ISO
ISO 19694-7:2024(Main)
Stationary source emissions — Determination of greenhouse gas emissions in energy-intensive industries — Part 7: Semiconductor and display industries

This document provides a methodology for calculating greenhouse gas (GHG) emissions from the semiconductor and display industry. This document includes the manufacture of semiconductor devices, microelectromechanical systems (MEMS), photovoltaic (PV) devices and displays. This document allows to report GHG emissions for various purposes and on different bases, such as a per-plant basis, per-company basis (by country or by region) or an international group basis. This document addresses all of the following direct and indirect sources of GHG: — direct GHG emissions [as defined in ISO 14064-1:2018, 5.2.4 a)] from sources that are owned or controlled by the company, such as emissions resulting from the following sources: — process: fluorinated compound (FC) gases and nitrous oxide (N2O) used in etching and wafer cleaning (EWC), remote plasma cleaning (RPC), in situ plasma cleansing (IPC), in situ thermal cleaning (ITC), N2O thin film deposition (TFD), and other N2O using process; — fuel combustion related to equipment and on-site vehicles, room heating/cooling; — fuel combustion of fuels for on-site power generation; — indirect GHG emissions [as defined in ISO 14064-1:2018, 5.2.4 b)] from the generation of imported electricity, heat or steam consumed by the organization. Other indirect GHG emissions [as defined in ISO 14064-1:2018, 5.2.4 c) to f)], which are the consequence of an organization’s activities, but arise from GHG sources that are owned or controlled by other organizations, are excluded from this document.

  • Draft
    41 pages
    English language
    sale 15% off
  • Draft
    41 pages
    English language
    sale 15% off
ISO
ISO 34504:2024(Main)
Road vehicles — Test scenarios for automated driving systems — Scenario categorization

This document defines an approach for the categorization of scenarios by providing tags that carry information about the scenarios. This document is applicable to SAE level 3 to SAE level 5 Automated Driving System (ADS)[19].

  • Draft
    51 pages
    English language
    sale 15% off
  • Draft
    51 pages
    English language
    sale 15% off
ISO
ISO 19848:2024(Main)
Ships and marine technology — Standard data for shipboard machinery and equipment

This document provides requirements and guidance on the capture and processing of data from sensors monitoring: ¾ the structure of the ship; ¾ shipboard machinery and equipment on board the ship; ¾ ship operational information. It is intended for implementers of software used to capture and process such data. This document describes how to name the sensor and required data item, as well as how to describe the data for shipboard machinery and equipment.

  • Draft
    139 pages
    English language
    sale 15% off
  • Draft
    139 pages
    English language
    sale 15% off
ISO
ISO/TR 5604:2024(Main)
Electrochemical noise measurement for assessing the protection of metal afforded by organic coatings

This document describes the principle of electrochemical noise measurement (EN), specifically focusing on the application of the technique to indicate the level of protection provided by an organic coating to the underlying metal. It discusses the principles behind the measurement method but also the type of electrochemical apparatus, the experimental set-up and electrodes configurations, the presentation of measured data, and analysis of results that have been used in the work done so far and reported in the references. This work has mainly been done in the laboratory, and there are some examples of work conducted in the field. NOTE At the time of publication of this document, electrochemical noise measurement for coatings is mainly used by a number of academic groups. This document aims to encourage more general application of this method, particularly to field work.

  • Draft
    15 pages
    English language
    sale 15% off
  • Draft
    15 pages
    English language
    sale 15% off
ISO
ISO 26900:2024(Main)
Space data and information transfer systems — Orbit data messages

This document specifies four standard message formats for use in transferring spacecraft orbit information between space agencies and commercial or governmental spacecraft operators: The Orbit Parameter Message (OPM), the Orbit Mean-Elements Message (OMM), the Orbit Ephemeris Message (OEM), and the Orbit Comprehensive Message (OCM). Such exchanges are used for: a) pre-flight planning for tracking or navigation support; b) scheduling tracking support; c) carrying out tracking operations (sometimes called metric predicts); d) performing orbit comparisons; e) carrying out navigation operations such as orbit propagation and orbit reconstruction; f) assessing mutual physical and electromagnetic interference among satellites orbiting the same celestial body (primarily Earth, Moon, and Mars at present); g) performing orbit conjunction (collision avoidance) studies; and h) developing and executing collaborative maneuvers to mitigate interference or enhance mutual operations. This document includes sets of requirements and criteria that the message formats have been designed to meet. For exchanges in which these requirements do not capture the needs of the participating agencies and satellite operators, another mechanism may be selected. This document is an international standard published under the auspices of CCSDS and International Standards Organization (ISO) Technical Committee 20, Subcommittee 13, developed jointly and in concert with the ISO TC20/SC14. As such, this CCSDS standard is also properly labeled as ISO 26900. The recommended Orbit Data Message format is ASCII (reference REF R_ISO_IEC_8859_1_1998 \h [4] 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000001600000052005F00490053004F005F004900450043005F0038003800350039005F0031005F0031003900390038000000 ). This document describes both ‘Keyword = Value Notation’ (KVN) as well as Extensible Markup Language (XML) (reference REF R_505x0b3XMLSpecificationforNavigationDa \h[5] 08D0C9EA79F9BACE118C8200AA004BA90B02000000080000002800000052005F00350030003500780030006200330058004D004C00530070006500630069006600690063006100740069006F006E0066006F0072004E0061007600690067006100740069006F006E0044000000 ) formatted messages. Selection of KVN or XML format should be mutually agreed between message exchange partners. NOTE – As currently specified, an OPM, OMM, or OEM file is to represent orbit data for a single spacecraft, and the OCM is to represent orbit data for either a single spacecraft or single parent spacecraft of a parent/child spacecraft deployment scenario. It is possible that the architecture may support multiple spacecraft per file; this could be considered in the future.

  • Draft
    117 pages
    English language
    sale 15% off