iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ISO

ISO 13856-1:2013

(Main)

Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors

Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors

ISO 13856-1:2013 establishes general principles and specifies requirements for the design and testing of pressure-sensitive mats and pressure-sensitive floors normally actuated by the feet for use as devices for protecting persons from hazardous machinery. The minimum safety requirements for the performance, marking and documentation are given. ISO 13856-1:2013 is applicable to pressure-sensitive mats and pressure-sensitive floors, regardless of the type of energy used (e.g. electrical, hydraulic, pneumatic or mechanical), designed to detect — persons weighing more than 35 kg, and — persons (e.g. children) weighing more than 20 kg. It is not applicable to the detection of persons weighing less than 20 kg. It does not specify the following because they are application-specific: a) dimensions or configuration of the effective sensing area of pressure-sensitive mat(s) or pressure-sensitive floor(s) in relation to any particular application; b) when pressure-sensitive mats or floors are appropriate in a particular situation; c) performance levels (PLs) for safety-related parts of control systems (SRP/CSs) other than providing a minimum level. ISO 13856-1:2013 gives guidance to assist the user (i.e. machinery manufacturer and/or user of the machinery) in providing an adequate arrangement.

Sécurité des machines — Dispositifs de protection sensibles à la pression — Partie 1: Principes généraux de conception et d'essai des tapis et planchers sensibles à la pression

L'ISO 13856-1:2013 établit les principes généraux et spécifie les exigences relatives à la conception et aux essais des tapis et planchers sensibles à la pression, normalement actionnés par les pieds, destinés à être utilisés comme dispositifs de protection des personnes contre les machines dangereuses. Les exigences de sécurité minimales pour les performances, le marquage et la documentation sont données. L'ISO 13856-1:2013 est applicable aux tapis et planchers sensibles à la pression, quel que soit le type d'énergie mise en ?uvre (par exemple électrique, hydraulique, pneumatique ou mécanique), conçus pour détecter des personnes pesant plus de 35 kg, et des personnes (par exemple des enfants) pesant plus de 20 kg. Elle n'est pas applicable à la détection de personnes pesant moins de 20 kg et ne couvre pas les applications spécifiques suivantes: détermination des dimensions ou de la configuration de la surface sensible effective du (des) tapis ou plancher(s) pour toute application spécifique; détermination de l'aptitude des tapis et planchers sensibles à la pression pour des applications particulières; niveaux de performance (PL) des parties des systèmes de commande relatives à la sécurité (SRP/CS) autres que ceux fournissant un niveau minimal. L'ISO 13856-1:2013 donne des conseils pour permettre à l'utilisateur (c'est-à-dire le fabricant de la machine et/ou l'utilisateur de la machine) de fournir un aménagement adapté.

General Information

Status
Published
Publication Date
11-Apr-2013
ICS
13.110 - Safety of machinery
Technical Committee
ISO/TC 199 - Safety of machinery
Drafting Committee
ISO/TC 199 - Safety of machinery
Current Stage
9093 - International Standard confirmed
Completion Date
16-Jan-2024
Ref Project

Relations

Revises
ISO 13856-1:2001 - Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for design and testing of pressure-sensitive mats and pressure-sensitive floors
Effective Date
17-Jul-2010

Buy Standard

ISO 13856-1:2013 - Safety of machinery -- Pressure-sensitive protective devicesISO 13856-1:2013 - Safety of machinery -- Pressure-sensitive protective devices
PreviousNext
Standard
ISO 13856-1:2013 - Safety of machinery -- Pressure-sensitive protective devices
English language
49 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 13856-1:2013 - Sécurité des machines -- Dispositifs de protection sensibles a la pressionISO 13856-1:2013 - Sécurité des machines -- Dispositifs de protection sensibles a la pression
PreviousNext
Standard
ISO 13856-1:2013 - Sécurité des machines -- Dispositifs de protection sensibles a la pression
French language
47 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 13856-1
Second edition
2013-04-15
Safety of machinery — Pressure-
sensitive protective devices —
Part 1:
General principles for design and
testing of pressure-sensitive mats and
pressure-sensitive floors
Sécurité des machines — Dispositifs de protection sensibles à la
pression —
Partie 1: Principes généraux de conception et d’essai des tapis et
planchers sensibles à la pression
Reference number
ISO 13856-1:2013(E)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 13856-1:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 2 ----------------------
ISO 13856-1:2013(E)

Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Requirements for design and testing . 3
4.1 General . 3
4.2 Actuating force . 5
4.3 Response time. 7
4.4 Static loading . 7
4.5 Number of operations . 7
4.6 Output state of sensor . 7
4.7 Response of output signal switching device(s) to actuating force . 8
4.8 Access for maintenance . 8
4.9 Adjustments . 8
4.10 Connections . 9
4.11 Environmental conditions . 9
4.12 Power supply .10
4.13 Electrical equipment .
...

NORME ISO
INTERNATIONALE 13856-1
Deuxième édition
2013-04-15
Sécurité des machines — Dispositifs de
protection sensibles à la pression —
Partie 1:
Principes généraux de conception
et d’essai des tapis et planchers
sensibles à la pression
Safety of machinery — Pressure-sensitive protective devices —
Part 1: General principles for design and testing of pressure-sensitive
mats and pressure-sensitive floors
Numéro de référence
ISO 13856-1:2013(F)
©
ISO 2013

---------------------- Page: 1 ----------------------
ISO 13856-1:2013(F)

DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2013
Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite ni utilisée
sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie, l’affichage sur
l’internet ou sur un Intranet, sans autorisation écrite préalable. Les demandes d’autorisation peuvent être adressées à l’ISO à
l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2013 – Tous droits réservés

---------------------- Page: 2 ----------------------
ISO 13856-1:2013(F)

Sommaire Page
Avant-propos .v
Introduction .vi
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 2
4 Exigences de conception et d’essais . 4
4.1 Généralités . 4
4.2 Force d’actionnement . 6
4.3 Temps de réponse. 8
4.4 Force statique . 8
4.5 Nombre d’actionnements . 8
4.6 État de sortie du capteur . 8
4.7 Réponse de(s) l’interface(s) de sortie à la force d’actionnement . . 9
4.8 Accès pour maintenance . 9
4.9 Réglage .10
4.10 Connexions .10
4.11 Conditions environnementales .10
4.12 Alimentation .11
4.13 Équipement électrique .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ISO
ISO 13849-1:2023(Main)
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design

This document specifies a methodology and provides related requirements, recommendations and guidance for the design and integration of safety‐related parts of control systems (SRP/CS) that perform safety functions, including the design of software. This document applies to SRP/CS for high demand and continuous modes of operation including their subsystems, regardless of the type of technology and energy (e.g. electrical, hydraulic, pneumatic, and mechanical). This document does not apply to low demand mode of operation. NOTE 1 See 3.1.44 and the IEC 61508 series for low demand mode of operation. This document does not specify the safety functions or required performance levels (PLr) that are to be used in particular applications. NOTE 2 This document specifies a methodology for SRP/CS design without considering if certain machinery (e.g. mobile machinery) has specific requirements. These specific requirements can be considered in a Type‑C standard. This document does not give specific requirements for the design of products/components that are parts of SRP/CS. Specific requirements for the design of some components of SRP/CS are covered by applicable ISO and IEC standards. This document does not provide specific measures for security aspects (e.g. physical, IT-security, cyber security). NOTE 3 Security issues can have an effect on safety functions. See ISO/TR 22100-4 and IEC/TR 63074 for further information.

  • Standard
    152 pages
    English language
    sale 15% off
  • Standard
    152 pages
    English language
    sale 15% off
  • Standard
    165 pages
    French language
    sale 15% off
  • Standard
    165 pages
    French language
    sale 15% off
  • Draft
    155 pages
    English language
    sale 15% off
  • Draft
    155 pages
    English language
    sale 15% off
  • Draft
    174 pages
    French language
    sale 15% off
ISO
ISO/TR 22053:2021(Main)
Safety of machinery — Safeguarding supportive system

This document provides guidance for the design and integration of a safeguarding supportive system (SSS) which is intended to include a mode selection as part of an SRP/CS or to add a layer of personnel authentication and authorization to an IMS designed according to ISO 11161. This document is meant to be used in conjunction with ISO 11161. This document is applicable to the SSS but does not address personnel qualification and competency.

  • Technical report
    8 pages
    English language
    sale 15% off
  • Draft
    8 pages
    English language
    sale 15% off
ISO
ISO/TR 22100-1:2021(Main)
Safety of machinery — Relationship with ISO 12100 — Part 1: How ISO 12100 relates to type-B and type-C standards

This document provides assistance to the designer/manufacturer of machinery and related components as to how the system of existing type-A, type-B and type-C machinery safety standards should be applied in order to design a machine to achieve a level of tolerable risk by adequate risk reduction. This document explains the general principles of ISO 12100 and how this type-A standard is used for practical cases in conjunction with type-B and type-C machinery safety standards. This document provides assistance to standards-writing committees on how ISO 12100 and type-B and type-C standards relate and explains their function in the risk assessment and risk reduction process according to ISO 12100. This document includes an overview of existing categories of type-B standards to assist standards readers and writers to navigate the many standards.

  • Technical report
    16 pages
    English language
    sale 15% off
  • Draft
    16 pages
    English language
    sale 15% off
ISO
ISO/TR 22100-5:2021(Main)
Safety of machinery — Relationship with ISO 12100 — Part 5: Implications of artificial intelligence machine learning

This document addresses how artificial intelligence machine learning can impact the safety of machinery and machinery systems. This document describes how hazards being associated with artificial intelligence (AI) applications machine learning in machinery or machinery systems, and designed to act within specific limits, can be considered in the risk assessment process. This document is not applicable to machinery or machinery systems with AI applications machine learning designed to act beyond specified limits that can result in unpredictable effects. This document does not address safety systems with AI, for example, safety-related sensors and other safety-related parts of control systems.

  • Technical report
    6 pages
    English language
    sale 15% off
  • Technical report
    6 pages
    French language
    sale 15% off
  • Draft
    6 pages
    English language
    sale 15% off
ISO
ISO 13857:2019(Main)
Safety of machinery — Safety distances to prevent hazard zones being reached by upper and lower limbs

This document establishes values for safety distances in both industrial and non-industrial environments to prevent machinery hazard zones being reached. The safety distances are appropriate for protective structures. It also gives information about distances to impede free access by the lower limbs (see Annex B). This document covers people of 14 years and older (the 5th percentile stature of 14-year-olds is approximately 1 400 mm). In addition, for upper limbs only, it provides information for children older than 3 years (5th percentile stature of 3-year-olds is approximately 900 mm) where reaching through openings needs to be addressed. NOTE 1 It is not practical to specify safety distances for all persons. Therefore, the values presented are intended to cover the 95th percentile of the population. Data for preventing lower limb access for children is not considered. The distances apply when sufficient risk reduction can be achieved by distance alone. Because safety distances depend on size, some people of extreme dimensions will still be able to reach hazard zones even when the requirements of this document are met. Compliance with the requirements in this document will prevent access to the hazard zone. Nevertheless the user of this document is advised that it does not provide the required risk reduction for every hazard (e.g. hazards related to machine emissions such as ionizing radiation, heat sources, noise, dust). The clauses covering lower limbs apply on their own only when access by the upper limbs to the same hazard zone is not foreseeable according to the risk assessment. The safety distances are intended to protect those persons trying to reach hazard zones under the conditions specified (see 4.1.1). NOTE 2 This document is not intended to provide measures against reaching a hazard zone by climbing over (see ISO 14120:2015, 5.18).

  • Standard
    20 pages
    English language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off
ISO
ISO 20607:2019(Main)
Safety of machinery — Instruction handbook — General drafting principles

This document specifies requirements for the machine manufacturer for preparation of the safety-relevant parts of an instruction handbook for machinery. This document: — provides further specifications to the general requirements on information for use given in ISO 12100:2010, 6.4.5; and — deals with the safety-related content, the corresponding structure and presentation of the instruction handbook, taking into account all phases of the life cycle of the machine. NOTE 1 The strategy for risk reduction at the machine is given in ISO 12100:2010, Clause 6, and includes inherently safe design measures, safeguarding and complementary risk reduction measures as well as information for use. NOTE 2 Annex A contains a correspondence table between ISO 12100:2010, 6.4, and this document. NOTE 3 Information for conception and preparation of instructions in general is available in IEC/IEEE 82079-1. This document establishes the principles which are indispensable to provide information on residual risks. This document does not address requirements for declaration of noise and vibration emissions. This document is not applicable to machinery manufactured before the date of its publication.

  • Standard
    24 pages
    English language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off
ISO
ISO 13851:2019(Main)
Safety of machinery — Two-hand control devices — Principles for design and selection

This document specifies the safety requirements of a two-hand control device (THCD) and the dependency of the output signal from the actuation by hand of the control actuating devices. This document describes the main characteristics of THCDs for the achievement of safety and sets out combinations of functional characteristics for three types. It does not apply to devices intended to be used as enabling devices, as hold-to-run devices or as special control devices. This document does not specify with which machines THCDs shall be used. It also does not specify which types of two-hand-control device shall be used for a specific application. Moreover, while guidance is given, it does not specify the required distance between the THCD and the danger zone (see 8.8). This document provides requirements for design and guidance on the selection (based on a risk assessment) of THCDs including the prevention of defeat, the avoidance of faults and verification of compliance. NOTE 1 A THCD only offers protection for the person using it. NOTE 2 For specific machines, the suitability of a two-hand control as a suitable protective device can be defined in a type-C standard. If such a standard does not exist or is not appropriate, the risk assessment and determination of suitable protective measures is the responsibility of the manufacturer of the machine. This document applies to all THCDs, independent of the energy used, including: — THCDs which are fully assembled for installation; — THCDs which are assembled by the machine manufacturer or integrator. This document is not applicable to THCDs manufactured before the date of its publication.

  • Standard
    21 pages
    English language
    sale 15% off
  • Standard
    22 pages
    French language
    sale 15% off
ISO
ISO 19353:2019(Main)
Safety of machinery — Fire prevention and fire protection

This document specifies methods for identifying fire hazards resulting from machinery and for performing a risk assessment. It gives the basic concepts and methodology of protective measures for fire prevention and protection to be taken during the design and construction of machinery. The measures consider the intended use and reasonably foreseeable misuse of the machine. It provides guidelines for consideration in reducing the risk of machinery fires to acceptable levels through machine design, risk assessment and operator instructions. This document is not applicable to: — mobile machinery; — machinery designed to contain controlled combustion processes (e.g. internal combustion engines, furnaces), unless these processes can constitute the ignition source of a fire in other parts of the machinery or outside of this; — machinery used in potentially explosive atmospheres and explosion prevention and protection; and — fire detection and suppression systems that are integrated in building fire safety systems. It is also not applicable to machinery or machinery components manufactured before the date of its publication.

  • Standard
    49 pages
    English language
    sale 15% off
  • Standard
    50 pages
    French language
    sale 15% off
ISO
ISO/TR 22100-4:2018(Main)
Safety of machinery — Relationship with ISO 12100 — Part 4: Guidance to machinery manufacturers for consideration of related IT-security (cyber security) aspects

This document gives machine manufacturers guidance on potential security aspects in relation to safety of machinery when putting a machine into service or placing on the market for the first time. It provides essential information to identify and address IT-security threats which can influence safety of machinery. This document gives guidance but does not provide detailed specifications on how to address IT-security aspects which can influence safety of machinery. This document does not address the bypass or defeat of risk reduction measures through physical manipulation.

  • Technical report
    15 pages
    English language
    sale 15% off
ISO
ISO/TS 19837:2018(Main)
Safety of machinery — Trapped key interlocking devices — Principles for design and selection

ISO/TS 19837:2018 specifies principles for the design, selection and application of trapped key interlocking devices and systems for machinery applications, independent of the type of energy used to control them or that they control. The requirements of this document apply to the safety related aspects of trapped key interlocking devices and systems. ISO 14119 always applies unless an exception is given in this document. ISO/TS 19837:2018 is intended to be used in conjunction with ISO 14119. ISO/TS 19837:2018 does not provide testing requirements. NOTE Documents addressing testing requirements can be found in the Bibliography.

  • Technical specification
    30 pages
    English language
    sale 15% off