Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type

Amendement 1 - Outils électroportatifs à moteur - Sécurité - Partie 2-4: Règles particulières pour les ponceuses et les lustreuses autres que du type à disque

General Information

Status
Published
Publication Date
26-May-2008
Current Stage
PPUB - Publication issued
Start Date
15-Jun-2008
Completion Date
27-May-2008
Ref Project

Relations

Buy Standard

Standard
IEC 60745-2-4:2002/AMD1:2008 - Amendment 1 - Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type
English and French language
9 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 60745-2-4
Edition 2.0 2008-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Hand-held motor-operated electric tools – Safety –
Part 2-4: Particular requirements for sanders and polishers other than disk type

Outils électroportatifs à moteur – Sécurité –
Partie 2-4: Règles particulières pour les ponceuses et les lustreuses autres que
du type à disque
IEC 60745-2-4 A1:2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
ƒ Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
ƒ IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
ƒ Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
ƒ Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
A propos de la CEI
La Commission Electrotechnique Internationale (CEI) est la première organisation mondiale qui élabore et publie des
normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications CEI
Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possédez
l’édition la plus récente, un corrigendum ou amendement peut avoir été publié.
ƒ Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm
Le Catalogue en-ligne de la CEI vous permet d’effectuer des recherches en utilisant différents critères (numéro de référence,
texte, comité d’études,…). Il donne aussi des informations sur les projets et les publications retirées ou remplacées.
ƒ Just Published CEI: www.iec.ch/online_news/justpub
Restez informé sur les nouvelles publications de la CEI. Just Published détaille deux fois par mois les nouvelles
publications parues. Disponible en-ligne et aussi par email.
ƒ Electropedia: www.electropedia.org
Le premier dictionnaire en ligne au monde de termes électroniques et électriques. Il contient plus de 20 000 termes et
définitions en anglais et en français, ainsi que les termes équivalents dans les langues additionnelles. Egalement appelé
Vocabulaire Electrotechnique International en ligne.
ƒ Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm
Si vous désirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du
Service clients ou contactez-nous:
Email: csc@iec.ch
Tél.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC 60745-2-4
Edition 2.0 2008-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Hand-held motor-operated electric tools – Safety –
Part 2-4: Particular requirements for sanders and polishers other than disk type

Outils électroportatifs à moteur – Sécurité –
Partie 2-4: Règles particulières pour les ponceuses et les lustreuses autres que
du type à disque
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
E
CODE PRIX
ICS 25.140.20; 24.140.30; 25.080.50 ISBN 2-8318-9803-X

– 2 – 60745-2-4 Amend. 1 © IEC:2008
FOREWORD
This amendment has been prepared by subcommittee 61F: Safety of hand-held motor-
operated electric tools, of IEC technical committee 61: Safety of household and similar
electrical appliances.
The text of this amendment is based on the following documents:
FDIS Report on voting
61F/733/FDIS 61F/753/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
With this amendment, this Part 2 is established on the basis of the fourth edition (2006) of
IEC 60745-1, Hand-held motor-operated electric tools – Safety – Part 1: General
requirements.
Main changes include editorial modifications to match with the fourth edition of IEC 60745-1,
addition of a new safety warning to Clause 8: Marking and instructions, and clarifications in
Annex K.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
1 Scope
Replace the existing text of Clause 1 by the following:
This clause of Part 1 is applicable, except as follows:
Addition:
This standard applies to sanders and polishers with the exception of all types of disc-type
tools, which are covered by IEC 60745-2-3.
Tools covered by this standard include but are not limited to belt sanders, reciprocating
sanders or polishers, orbital sanders or polishers, and random orbit sanders or polishers.
3 Definitions
Change the title of Clause 3 to read:

60745-2-4 Amend. 1 © IEC:2008 – 3 –
3 Terms and definitions
8 Marking and instructions
Add the following new subclause:
8.12.1.1 Addition:
– Hold power tool by insulated gripping surfaces, because the belt may contact its
own cord. Cutting a "live" wire may make exposed metal parts of the power tool "live" and
could give the operator an electric shock.
NOTE The above safety warning applies only to belt sanders and may be omitted for other types of sanders.
17 Endurance
Replace the existing text of 17.2 by the following:
17.2 Replacement of the fifth paragraph, except for belt sanders:
Orbital sanders and polishers, random orbit sanders and polishers, and reciprocating sanders
and polishers are operated while the platen, fitted with abrasive paper in reverse position or a
polishing bonnet as applicable, is resting under the weight of the sander or polisher on a steel
plate. The abrasive paper should be replaced as required to avoid direct contact between
platen and steel plate. These tools are only tested in the upright position where the platen is
horizontal.
20 Mechanical strength
Replace the existing text of Clause 20 by the following:
This clause of Part 1 is appl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.