Mnemonics and designations of symbols for measuring relays, instruments and related device

IEC/TR 62711:2011(E) provides recommendations for consistent use of mnemonics and qualifying symbols to be applied to symbols representing devices used in systems for monitoring, protection, switching, and controlling of apparatus in electrical substations, generating stations, power utilization and conversion facilities, and equipment designed for automatic protection of power systems. The recommendations are intended for designers, manufacturers and engineers of such systems.

General Information

Status
Published
Publication Date
11-Oct-2011
Current Stage
PPUB - Publication issued
Start Date
31-Dec-2011
Completion Date
12-Oct-2011
Ref Project

Buy Standard

Technical report
IEC TR 62711:2011 - Mnemonics and designations of symbols for measuring relays, instruments and related device
English language
24 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC/TR 62711 ®
Edition 1.0 2011-10
TECHNICAL
REPORT
Mnemonics and designations of symbols for measuring relays, instruments and
related device
IEC/TR 62711:2011(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or
IEC's member National Committee in the country of the requester.
If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication,
please contact the address below or your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de la CEI ou du Comité national de la CEI du pays du demandeur.
Si vous avez des questions sur le copyright de la CEI ou si vous désirez obtenir des droits supplémentaires sur cette
publication, utilisez les coordonnées ci-après ou contactez le Comité national de la CEI de votre pays de résidence.

IEC Central Office
3, rue de Varembé
CH-1211 Geneva 20
Switzerland
Email: inmail@iec.ch
Web: www.iec.ch
About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.
 Catalogue of IEC publications: www.iec.ch/searchpub
The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,…).
It also gives information on projects, withdrawn and replaced publications.
 IEC Just Published: www.iec.ch/online_news/justpub
Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available
on-line and also by email.
 Electropedia: www.electropedia.org
The world's leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions
in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical
Vocabulary online.
 Customer Service Centre: www.iec.ch/webstore/custserv
If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service
Centre FAQ or contact us:
Email: csc@iec.ch
Tel.: +41 22 919 02 11
Fax: +41 22 919 03 00
IEC/TR 62711 ®
Edition 1.0 2011-10
TECHNICAL
REPORT
Mnemonics and designations of symbols for measuring relays, instruments and
related device
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
T
ICS 01.080.40; 29.200 ISBN 978-2-88912-691-0

– 2 – TR 62711  IEC:2011(E)
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 6
3 Terms and definitions . 6
4 Measuring relay symbols . 6
5 Measuring instruments . 6
6 Mnemonics and designations for measuring relays and instruments . 7
6.1 Overview . 7
6.2 Measuring relays . 7
6.3 Power system measuring instruments. 17
Bibliography . 24

Figure 1 – The general symbol for a measuring relay in IEC 60617 . 5
Figure 2 – The general symbols for a measuring instrument in IEC 60617 . 5

Table 1 – Measuring relays – Prefix . 7
Table 2 – Measuring relays – Suffix . 7
Table 3 – Measuring relays – General . 8
Table 4 – Measuring relays – Current . 9
Table 5 – Measuring relays – Voltage . 10
Table 6 – Measuring relays – Frequency . 10
Table 7 – Measuring relays – Impedance . 11
Table 8 – Measuring relays – Power . 11
Table 9 – Measuring relays – Phase . 12
Table 10 – Measuring relays – Other quantities . 12
Table 11 – Measuring relays – Other fault phenomenon. 12
Table 12 – Measuring relays – Pilot wire relay . 13
Table 13 – Measuring relays – Carrier pilot relay . 13
Table 14 – Measuring relays – Microwave relay . 14
Table 15 – Measuring relays – Calculation type . 14
Table 16 – Measuring relays – Apparatus protection and control . 14
Table 17 – Measuring relays – Other type . 15
Table 18 – Measuring relays – Power system control . 17
Table 19 – Measuring instruments – Power system measuring instruments . 18

TR 62711  IEC:2011(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MNEMONICS AND DESIGNATIONS OF SYMBOLS FOR MEASURING
RELAYS, INSTRUMENTS AND RELATED DEVICE

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
The main task of IEC technical committees is to prepare International Standards. However, a
technical committee may propose the publication of a technical report when it has collected data
of a different kind from that which is normally published as an International Standard, for
example "state of the art".
IEC 62711, which is a technical report, was prepared by IEC technical committee 3: Information
structures, documentation and graphical symbols.
The text of this technical report is based on the following documents:
Enquiry draft Report on voting
3/1029A/DTR 3/1041/RVC
Full information on the voting for the approval of this technical report can be found in the report
on voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

– 4 – TR 62711  IEC:2011(E)
The committee has decided that the contents of this publication will remain unchanged until the
stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data related to
the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
A bilingual version of this standard may be issued at a later date.

TR 62711  IEC:2011(E) – 5 –
MNEMONICS AND DESIGNATIONS OF SYMBOLS FOR MEASURING
RELAYS, INSTRUMENTS AND RELATED DEVICE

1 Scope
This Technical Report provides recommendations for consistent use of mnemonics and
qualifying symbols to be applied to symbols representing devices used in systems for monitoring,
protection, switching, and controlling of apparatus in electrical substations, generating stations,
power utilization and conversion facilities, and equipment designed for automatic protection of
power systems. The recommendations are intended for designers, manufacturers and
engineers of such systems.
For symbols of measuring relay and measuring instrument, it is intended to serve two purposes,
namely:
– Give a review of standardized designations (as defined in this report);
– Limit the range of possible variants (after final standardization and introduction in
IEC 60617).
Symbols for measuring relays are symbols in which the functional behaviour of an element,
mostly because of its complexity, is described by qualifying symbols e.g. IEC 60617-S00328
(2001-07), IEC 60617-S00337 (2001-07), particularly by referring to supporting documentation;
the relevant rules and explanations are to be found in IEC 60617 in the application notes
associated with the symbols, e.g. IEC 60617-S00327 (2001-07) (A00091 through A00094).
IEC 60617-S00327 (2001-07):
Measuring relay
Figure 1 – The general symbol for a measuring relay in IEC 60617
Symbols for indicating, recording or integrating instruments are symbols in which the functional
behaviour of an element is fully described by standardized means. The relevant rules and
explanations are to be found in IEC 60617 in the application notes associated with the symbols
IEC 60617-S00910 (2001-07), IEC 60617-S00911 (2001-07) and IEC 60617-S00912 (A00144
through A00147).
IEC 60617-S00910 (2001-07): IEC 60617-S00911 (2001-07): IEC 60617-S00912 (2001-07):
Indicating instrument Recording instrument Integrating instrument

Figure 2 – The general symbols for a measuring instrument in IEC 60617

– 6 – TR 62711  IEC:2011(E)
2 Normative references
The following referenced documents are indispensable for the application of this document. For
dated references, only the edition cited applies. For undated references, the latest edition of the
referenced document (including any amendments) applies.
IEC 60617, Graphical symbols for diagrams
ISO/IEC 81714-1, Design of graphical symbols for use in the technical documentation of
products – Part 1: Basic rules
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
protection relay
measuring relay which, either solely or in combination with other relays, is a constituent of a
protection equipment
[IEC 60050-448:1995, 448-11-02]
4 Measuring relay symbols
Power system
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.