Railway applications - Energy measurement on board trains - Part 5: Conformance test

IEC 62888-5:2018 specifies the conformance test arrangements for newly manufactured EMS (Energy management system) installed on a traction unit. This includes the integration conformance test and installation conformance test. In addition, this document also specifies the conformance test procedures for device and ancillary component replacement (e.g. due to damage in service), and periodic check to verify the EMS conformance test remains valid.

Applications ferroviaires - Mesure d'énergie à bord des trains – Partie 5: Essai de conformité

L’IEC 62888-5:2018 spécifie les conditions d’essai de conformité pour un EMS (système de mesure d'énergie) nouvellement fabriqué, installé sur une unité de traction. Cela inclut l’essai de conformité d'intégration et l'essai de conformité d'installation. De plus, ce document spécifie les procédures d'essai de conformité pour le remplacement d'appareil et de composant auxiliaire (par exemple, pour raison de dommages en service) et le contrôle périodique pour vérifier que l'essai de conformité de l'EMS reste valide.

General Information

Status
Published
Publication Date
14-Aug-2018
Current Stage
PPUB - Publication issued
Start Date
03-Aug-2018
Completion Date
15-Aug-2018
Ref Project

Buy Standard

Standard
IEC 62888-5:2018 - Railway applications - Energy measurement on board trains - Part 5: Conformance test
English and French language
46 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


IEC 62888-5 ®
Edition 1.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Railway applications – Energy measurement on board trains –
Part 5: Conformance test
Applications ferroviaires – Mesure d'énergie à bord des trains –
Partie 5: Essai de conformité
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé info@iec.ch
CH-1211 Geneva 20 www.iec.ch
Switzerland
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 21 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - webstore.iec.ch/advsearchform IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 67 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished

Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: sales@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 21 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC -
Glossaire IEC - std.iec.ch/glossary
webstore.iec.ch/advsearchform
67 000 entrées terminologiques électrotechniques, en anglais
La recherche avancée permet de trouver des publications IEC et en français, extraites des articles Termes et Définitions des
en utilisant différents critères (numéro de référence, texte, publications IEC parues depuis 2002. Plus certaines entrées
comité d’études,…). Elle donne aussi des informations sur les antérieures extraites des publications des CE 37, 77, 86 et
projets et les publications remplacées ou retirées. CISPR de l'IEC.

IEC Just Published - webstore.iec.ch/justpublished Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just Si vous désirez nous donner des commentaires sur cette
Published détaille les nouvelles publications parues. publication ou si vous avez des questions contactez-nous:
Disponible en ligne et aussi une fois par mois par email. sales@iec.ch.

IEC 62888-5 ®
Edition 1.0 2018-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Railway applications – Energy measurement on board trains –

Part 5: Conformance test
Applications ferroviaires – Mesure d'énergie à bord des trains –

Partie 5: Essai de conformité
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 45.060.01 ISBN 978-2-8322-5914-6

– 2 – IEC 62888-5:2018 © IEC 2018
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 9
2 Normative references . 9
3 Terms, definitions and abbreviated terms . 10
3.1 Terms and definitions . 10
3.2 Abbreviated terms . 11
4 Conformance test approach . 11
4.1 General . 11
4.2 Situation of applicability . 11
4.3 General methodology . 12
4.4 EMS system level specific methodology . 13
4.4.1 General . 13
4.4.2 EMS integration design review . 13
4.4.3 EMS integration type test . 13
4.4.4 EMS installation design review . 13
4.4.5 EMS installation type test . 14
4.4.6 EMS installation routine test . 14
4.4.7 EMS periodic re-verification . 14
4.4.8 Replacement of devices and ancillary components . 14
5 Conformance test procedures . 14
5.1 General . 14
5.2 EMS integration design review . 14
5.2.1 EMS integration design review documentation . 14
5.2.2 EMS integration design review assessment . 14
5.2.3 Integration Design Review Report (IDRR) . 15
5.3 EMS integration type test . 15
5.3.1 General . 15
5.3.2 Integration type test procedure . 15
5.3.3 Integration type tests . 15
5.3.4 Integration Type Test Report (ITTR) . 16
5.4 EMS installation design review . 16
5.4.1 EMS installation design review documentation . 16
5.4.2 EMS installation design review assessment . 17
5.4.3 Installation Design Review Report (SDRR) . 18
5.5 EMS Installation type test . 18
5.5.1 General . 18
5.5.2 Installation procedure . 18
5.5.3 Installation type test procedure . 18
5.5.4 Installation type tests . 18
5.5.5 Installation Type Test Report (STTR) . 19
5.6 EMS installation routine test . 19
5.6.1 General . 19
5.6.2 Installation routine test procedure . 20
5.6.3 Routine tests . 20
5.6.4 Installation Routine Test Report (IRTR) . 21

5.7 Periodic re-verification . 21
5.7.1 Procedure . 21
5.7.2 Re-verification Report (RVR) . 21
5.8 Replacement of devices and ancillary components . 21
5.8.1 General . 21
5.8.2 Documentation . 22
5.8.3 Item replacement conformance test . 22
5.8.4 Software . 23
5.8.5 Programmable parameters . 23
5.8.6 Replacement report . 23

Figure 1 – EMS functional structure and dataflow diagram . 8
Figure 2 – Methods of conformance test . 13
Figure 3 – Overview of EMS installation routine test process . 19
Figure 4 – Replacement of devices and ancillary components . 22

– 4 – IEC 62888-5:2018 © IEC 2018
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RAILWAY APPLICATIONS –
ENERGY MEASUREMENT ON BOARD TRAINS –

Part 5: Conformance test
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and
non-governmental organizations liaising with the IEC
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.