IEC 62828-2:2017

IEC 62828-2 ®
Edition 1.0 2017-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Reference conditions and procedures for testing industrial and process
measurement transmitters –
Part 2: Specific procedures for pressure transmitters

Conditions de référence et procédures pour l’essai des transmetteurs de mesure
industrielle et de processus –
Partie 2: Procédures spécifiques pour les transmetteurs de pression

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from
either IEC or IEC's member National Committee in the country of the requester. If you have any questions about IEC
copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or
your local IEC member National Committee for further information.

Droits de reproduction réservés. Sauf indication contraire, aucune partie de cette publication ne peut être reproduite
ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie
et les microfilms, sans l'accord écrit de l'IEC ou du Comité national de l'IEC du pays du demandeur. Si vous avez des
questions sur le copyright de l'IEC ou si vous désirez obtenir des droits supplémentaires sur cette publication, utilisez
les coordonnées ci-après ou contactez le Comité national de l'IEC de votre pays de résidence.

IEC Central Office Tel.: +41 22 919 02 11
3, rue de Varembé Fax: +41 22 919 03 00
CH-1211 Geneva 20 info@iec.ch
Switzerland www.iec.ch
About the IEC
The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes
International Standards for all electrical, electronic and related technologies.

About IEC publications
The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the
latest edition, a corrigenda or an amendment might have been published.

IEC Catalogue - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
The stand-alone application for consulting the entire The world's leading online dictionary of electronic and
bibliographical information on IEC International Standards, electrical terms containing 20 000 terms and definitions in
Technical Specifications, Technical Reports and other English and French, with equivalent terms in 16 additional
documents. Available for PC, Mac OS, Android Tablets and languages. Also known as the International Electrotechnical
iPad. Vocabulary (IEV) online.

IEC publications search - www.iec.ch/searchpub IEC Glossary - std.iec.ch/glossary
The advanced search enables to find IEC publications by a 65 000 electrotechnical terminology entries in English and
variety of criteria (reference number, text, technical French extracted from the Terms and Definitions clause of
committee,…). It also gives information on projects, replaced IEC publications issued since 2002. Some entries have been
and withdrawn publications. collected from earlier publications of IEC TC 37, 77, 86 and

CISPR.
IEC Just Published - webstore.iec.ch/justpublished
Stay up to date on all new IEC publications. Just Published IEC Customer Service Centre - webstore.iec.ch/csc
details all new publications released. Available online and If you wish to give us your feedback on this publication or
also once a month by email. need further assistance, please contact the Customer Service
Centre: csc@iec.ch.
A propos de l'IEC
La Commission Electrotechnique Internationale (IEC) est la première organisation mondiale qui élabore et publie des
Normes internationales pour tout ce qui a trait à l'électricité, à l'électronique et aux technologies apparentées.

A propos des publications IEC
Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possédez l’édition la
plus récente, un corrigendum ou amendement peut avoir été publié.

Catalogue IEC - webstore.iec.ch/catalogue Electropedia - www.electropedia.org
Application autonome pour consulter tous les renseignements
Le premier dictionnaire en ligne de termes électroniques et
bibliographiques sur les Normes internationales,
électriques. Il contient 20 000 termes et définitions en anglais
Spécifications techniques, Rapports techniques et autres
et en français, ainsi que les termes équivalents dans 16
documents de l'IEC. Disponible pour PC, Mac OS, tablettes
langues additionnelles. Egalement appelé Vocabulaire
Android et iPad.
Electrotechnique International (IEV) en ligne.

Recherche de publications IEC - www.iec.ch/searchpub
Glossaire IEC - std.iec.ch/glossary
65 000 entrées terminologiques électrotechniques, en anglais
La recherche avancée permet de trouver des publications IEC
en utilisant différents critères (numéro de référence, texte, et en français, extraites des articles Termes et Définitions des
comité d’études,…). Elle donne aussi des informations sur les publications IEC parues depuis 2002. Plus certaines entrées
projets et les publications remplacées ou retirées. antérieures extraites des publications des CE 37, 77, 86 et

CISPR de l'IEC.
IEC Just Published - webstore.iec.ch/justpublished

Service Clients - webstore.iec.ch/csc
Restez informé sur les nouvelles publications IEC. Just
Published détaille les nouvelles publications parues. Si vous désirez nous donner des commentaires sur cette
Disponible en ligne et aussi une fois par mois par email. publication ou si vous avez des questions contactez-nous:
csc@iec.ch.
IEC 62828-2 ®
Edition 1.0 2017-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Reference conditions and procedures for testing industrial and process

measurement transmitters –
Part 2: Specific procedures for pressure transmitters

Conditions de référence et procédures pour l’essai des transmetteurs de

mesure industrielle et de processus –

Partie 2: Procédures spécifiques pour les transmetteurs de pression

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 17.100; 25.040.40 ISBN 978-2-8322-4850-8

– 2 – IEC 62828-2:2017  IEC 2017
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
3.1 General . 7
3.2 Terms related the process conditions . 9
4 General description of the device and overview . 9
5 Reference test conditions . 9
6 Test procedures . 10
6.1 General . 10
6.2 Tests at standard and operating reference test conditions. 10
6.2.1 General . 10
6.2.2 Accuracy test suitable for routine and acceptance tests . 10
6.2.3 Overpressure . 11
6.2.4 Influence of static pressure . 13
6.2.5 Long-term drift . 15
6.2.6 Leakage test . 16
6.2.7 Additional tests for diaphragm/remote seals – Influence of process
temperature (long term) . 16
7 Test report and technical documentation . 16
7.1 General . 16
7.2 Total probable error . 17
Annex A (informative) Relationship between the SI unit and other pressure related
units . 18
Annex B (informative) Pressure process measurement transmitter (PMT) . 19
B.1 General description of a pressure PMT . 19
B.2 Typical PMTs . 19
Annex C (informative) Example of signal current range for a 4 to 20 mA PMT . 21
C.1 Signal current range of a 4 mA to 20 mA transmitter (before adjustment) . 21
C.2 Proportional range . 21
C.3 Normal range . 21
C.4 Underrange . 21
C.5 Overrange . 22
C.6 Low alarm . 22
C.7 High alarm . 22
Bibliography . 23

Figure 1 – Measuring range and associated properties of a pressure PMT . 8
Figure 2 – Schematic example of a test set-up for pressure PMT . 10
Figure 3 – Example of measured error plot . 11
Figure 4 – Procedure for the determination of the unilateral overpressure error . 12
Figure 5 – Schematic example of test set-up for determine the effect of the static
pressure . 13
Figure 6 – Procedure for the determination of the zero point error with static pressure . 14

Figure 7 – Procedure for the determination of the span error for static pressure . 15
Figure B.1 – Schematic example of intelligent PMT model . 20
Figure C.1 – Signal current range of a 4 mA – 20 mA transmitter (before adjustment) . 21

Table 1 – Example of measured errors. 11
Table A.1 – Relationship between the SI unit and other pressure related units. 18

– 4 – IEC 62828-2:2017  IEC 2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
REFERENCE CONDITIONS AND PROCEDURES FOR TESTING INDUSTRIAL
AND PROCESS MEASUREMENT TRANSMITTERS –

Part 2: Specific procedures for pressure transmitters

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committe
...