EN IEC 63033-2:2022

SLOVENSKI STANDARD
01-december-2022
Nadomešča:
SIST EN IEC 63033-2:2019
Multimedijski sistemi in oprema za vozila - Sistem prostorskega pogleda - 2. del:
Metode snemanja prostorskega pogleda (IEC 63033-2:2022)
Multimedia Systems and equipment for vehicles - Surround view system - Part 2:
Recording methods of the surround view system (IEC 63033-2:2022)
Multimedia Systeme und Einrichtungen für Fahrzeuge - Rundumsicht System - Teil 2:
Verfahren zur Aufzeichnung des Rundumsicht Systems (IEC 63033-2:2022)
Systèmes et équipements multimédias pour véhicules - Système de vision panoramique
- Partie 2: Méthodes d'enregistrement du système de vision panoramique (IEC 63033-
2:2022)
Ta slovenski standard je istoveten z: EN IEC 63033-2:2022
ICS:
33.160.60 Večpredstavni (multimedijski) Multimedia systems and
sistemi in oprema za teleconferencing equipment
telekonference
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 63033-2

NORME EUROPÉENNE
EUROPÄISCHE NORM May 2022
ICS 33.160.99; 43.040.15 Supersedes EN IEC 63033-2:2019
English Version
Multimedia Systems and equipment for vehicles - Surround view
system - Part 2: Recording methods of the surround view system
(IEC 63033-2:2022)
Systèmes et équipements multimédias pour véhicules - Multimedia Systeme und Einrichtungen für Fahrzeuge -
Système de vision panoramique - Partie 2: Méthodes Rundumsicht System - Teil 2: Verfahren zur Aufzeichnung
d'enregistrement du système de vision panoramique des Rundumsicht Systems
(IEC 63033-2:2022) (IEC 63033-2:2022)
This European Standard was approved by CENELEC on 2022-05-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63033-2:2022 E

European foreword
The text of document 100/3733/FDIS, future edition 2 of IEC 63033-2, prepared by IEC/TC 100
"Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 63033-2:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-02-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-05-25
document have to be withdrawn
This document supersedes EN IEC 63033-2:2019 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63033-2:2022 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 63033-1 - Multimedia systems and equipment for EN IEC 63033-1 -
vehicles - Surround view system - Part 1:
General
IEC 63033-2 ®
Edition 2.0 2022-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Multimedia systems and equipment for vehicles – Surround view system –

Part 2: Recording methods of the surround view system

Systèmes et équipements multimédias pour véhicules – Système de vision

panoramique –
Partie 2: Méthodes d'enregistrement du système de vision panoramique

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.160.99; 43.040.15 ISBN 978-2-8322-1095-1

– 2 – IEC 63033-2:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions and abbreviated terms . 6
3.1 Abbreviated terms . 6
4 System model . 6
4.1 General . 6
4.2 Video recording. 7
4.2.1 General . 7
4.2.2 Recording 1 . 7
4.2.3 Recording 2 . 8
5 Viewer . 10
5.1 General . 10
5.2 General viewer . 10
5.3 Enhanced viewer . 10

Figure 1 – Display and recording system model of surround view system . 7
Figure 2 – Raw video data example of recording 1 – Images before composition . 7
Figure 3 – The composite video data example of recording 2 . 9
Figure 4 – Viewer example . 10

Table 1 – Metadata for recording 1 . 8
Table 2 – Metadata for dependent part of video data 1 . 8
Table 3 – Metadata for dependent part of video data 2 . 9

IEC 63033-2:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
MULTIMEDIA SYSTEMS AND EQUIPMENT FOR VEHICLES –
SURROUND VIEW SYSTEM –
Part 2: Recording methods of the surround view system

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 63033-2 has been prepared by technical area 17: Multimedia systems and equipment for
vehicles, of IEC technical committee 100: Audio, video and multimedia systems and equipment.
It is an International Standard.
This second edition cancels and replaces the first edition published in 2018. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) updates to the text and the title to reflect the change of the scope of the IEC 63033 series.

– 4 – IEC 63033-2:2022 © IEC 2022
The text of this International Standard is based on the following documents:
Draft Report on voting
100/3733/FDIS 100/3752/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
A list of all parts in the IEC 63033 series, published under the general title Multimedia systems
and equipment for vehicles – Surround view system, can be found on the IEC website.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
...