EN 61000-6-4:2007

SLOVENSKI STANDARD
01-september-2007
(OHNWURPDJQHWQD]GUXåOMLYRVW(0&GHO2VQRYQLJHQHULþQLVWDQGDUGL
6WDQGDUGRGGDMDQMDPRWHQMYLQGXVWULMVNLKRNROMLK
Electromagnetic compatibility (EMC) -- Part 6-4: Generic standards - Emission standard
for industrial environments
Elektromagnetische Verträglichkeit (EMV) -- Teil 6-4: Fachgrundnormen -
Störaussendung für Industriebereiche
Compatibilité électromagnétique (CEM) -- Partie 6-4: Normes génériques - Norme sur
l'émission pour les environnements industriels
Ta slovenski standard je istoveten z: EN 61000-6-4:2007
ICS:
33.100.10 Emisija Emission
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61000-6-4
NORME EUROPÉENNE
January 2007
EUROPÄISCHE NORM
ICS 33.100.10 Supersedes EN 61000-6-4:2001

English version
Electromagnetic compatibility (EMC) -
Part 6-4: Generic standards -
Emission standard for industrial environments
(IEC 61000-6-4:2006)
Compatibilité électromagnétique (CEM) -  Elektromagnetische Verträglichkeit (EMV) -
Partie 6-4: Normes génériques - Teil 6-4: Fachgrundnormen -
Norme sur l'émission Störaussendung für Industriebereiche
pour les environnements industriels (IEC 61000-6-4:2006)
(CEI 61000-6-4:2006)
This European Standard was approved by CENELEC on 2006-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61000-6-4:2007 E
Foreword
The text of document CISPR/H/122/FDIS, future edition 2 of IEC 61000-6-4, prepared by CISPR SC H,
Limits for the protection of radio services, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 61000-6-4 on 2006-12-01.
This European Standard supersedes EN 61000-6-4:2001.
The major changes in EN 61000-6-4:2007 are the inclusion of a clause on tests for equipment in series
production, a new clause on measurement uncertainty and the inclusion of requirements on
telecommunications ports. The informative annex has been deleted.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-12-01
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and covers essential requirements of
EC Directives EMC (89/336/EEC), EMC (2004/108/EC) and RTTED (1999/5/EC). See Annex ZZ.
Annexes ZA and ZZ have been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61000-6-4:2006 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61000-6-1 NOTE  Harmonized as EN 61000-6-1:2007 (not modified).
IEC 61000-6-3 NOTE  Harmonized as EN 61000-6-3:2007 (not modified).
CISPR 14-1 NOTE  Harmonized as EN 55014-1:2000 (not modified).
__________
- 3 - EN 61000-6-4:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
CISPR 11 (mod) - Industrial scientific and medical (ISM) radio- EN 55011 200X
frequency equipment - Electromagnetic
disturbance characteristics - Limits and
methods of measurement
CISPR 16-1-2 2003 Specification for radio disturbance and EN 55016-1-2 2004
immunity measuring apparatus and methods -
Part 1-2: Radio disturbance and immunity
measuring apparatus - Ancillary equipment -
Conducted disturbances
CISPR 16-2-1 2003 Specification for radio disturbance and EN 55016-2-1 2004
immunity measuring apparatus and methods -
Part 2-1: Methods of measurement of
disturbances and immunity - Conducted
disturbance measurements
1) 3)
CISPR 16-2-3 - Specification for radio disturbance and EN 55016-2-3 2006
immunity measuring apparatus and methods -
Part 2-3: Methods of measurement of
disturbances and immunity - Radiated
disturbance measurements
1) 3)
CISPR 16-4-2 - Specification for radio disturbance and EN 55016-4-2 2004
immunity measuring apparatus and methods -
Part 4-2: Uncertainties, statistics and limit
modelling - Uncertainty in EMC
measurements
1) 3)
CISPR 22 (mod) - Information technology equipment - Radio EN 55022 2006
disturbance characteristics - Limits and
methods of measurement
1)
Undated reference.
2)
To be published.
3)
Valid edition at date of issue.

Annex ZZ
(informative)
Coverage of Essential Requirements of EC Directives
This European Standard has been prepared under a mandate given to CENELEC by the European
Commission and the European Free Trade Association and within its scope the standard covers the
essential requirements as given in Article 4(a) of the EC Directive 89/336/EEC and Annex I Article 1(a) of
the EC Directive 2004/108/EC, and the essential requirements of Article 3.1(b) (emission only) of the
EC Directive 1999/5/EC.
Compliance with this standard provides one means of conformity with the specified essential
requirements of the Directives concerned.
WARNING: Other requirements and other EC Directives may be applicable to the products falling within
the scope of this standard.
__________
INTERNATIONAL
IEC
ELECTROTECHNICAL
61000-6-4
COMMISSION
Second edition
2006-07
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
Electromagnetic compatibility (EMC) –
Part 6-4:
Generic standards –
Emission standard for industrial environments

© IEC 2006 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,
including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale L
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue

61000-6-4  IEC:2006 – 3 –
CONTENTS
FOREWORD.5
INTRODUCTION.9

1 Scope and object .11
2 Normative references.13
3 Terms and definitions .13
4 Conditions during testing.15
5 Product documentation .17
6 Applicability .17
7 Emission requirements .17
8 Application of limits in tests for conformity of equipment in series production.17
9 Measurement uncertainty.19

Bibliography .23

Figure 1 – Examples of ports.13

Table 1 − Emission.21

61000-6-4  IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE
___________
ELECTROMAGNETIC COMPATIBILITY (EMC) –

Part 6-4: Generic standards – Emission standard
for industrial environments
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with an IEC Publication.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61000-6-4 has been prepared by CISPR subcommittee H: Limits for
the protection of radio services.
This second edition cancels and replaces the first edition published in 1997. It constitutes a
technical revision. The major changes in this edition are the inclusion of a clause on tests for
equipment in series production, a new clause on measurement uncertainty and the inclusion of
requirements on telecommunications ports. The informative annex has been deleted.

61000-6-4  IEC:2006 – 7 –
The text of this standard is based on the following documents:
FDIS Report on voting
CISPR/H/122/FDIS CISPR/H/125/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until the
maintenance result date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
61000-6-4  IEC:2006 – 9 –
INTRODUCTION
IEC 61000 is published in separate parts according to the following structure:
Part 1: General
General considerations (in
...