FprEN IEC 62275:2022

SLOVENSKI STANDARD
oSIST prEN IEC 62275:2022
01-april-2022
Sistemi za urejanje pokabljenja - Kabelske vezice za električne inštalacije
Cable management systems - Cable ties for electrical installations
Kabelführungssysteme - Kabelbinder für elektrische Installationen
Systèmes de câblage - Colliers pour installations électriques
Ta slovenski standard je istoveten z: prEN IEC 62275:2022
ICS:
29.120.99 Druga električna dodatna Other electrical accessories
oprema
oSIST prEN IEC 62275:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 62275:2022
oSIST prEN IEC 62275:2022
23A/994/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62275 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-01-28 2022-04-22
SUPERSEDES DOCUMENTS:
23A/963/CD, 23A/978A/CC
IEC SC 23A : CABLE MANAGEMENT SYSTEMS
SECRETARIAT: SECRETARY:
United Kingdom Mr Rajeev Vagdia
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.

TITLE:
Cable management systems - Cable ties for electrical installations

PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
download this electronic file, to make a copy and to print out the content for the sole purpose of preparing
National Committee positions. You may not copy or "mirror" the file or printed version of the document, or any
part of it, for any other purpose without permission in writing from IEC.

oSIST prEN IEC 62275:2022
IEC CDV 62275 © IEC 2021 2 23A/994/CDV

1 CONTENTS
2 CONTENTS . 2
3 FOREWORD . 4
4 1 Scope . 6
5 2 Normative references . 6
6 3 Terms and definitions . 6
7 4 General requirements . 8
8 5 General notes on tests . 8
9 6 Classification . 13
10 6.1 According to material . 13
11 6.1.1 Metallic component . 13
12 6.1.2 Non-metallic component . 13
13 6.1.3 Composite component . 13
14 6.2 According to loop tensile strength for cable ties and mechanical strength for
15 fixing devices . 13
16 6.2.1 Loop tensile strength for cable ties . 13
17 6.2.2 Type 1 – Retains at least 50 % of declared loop tensile strength for
18 cable ties and mechanical strength for fixing devices after test
19 conditions . 13
20 6.2.3 Type 2 – Retains 100 % declared loop tensile strength for cable ties
21 and mechanical strength for fixing devices after test conditions . 13
22 6.2.4 According to loop tensile strength and mechanical strength of integral
23 assemblies . 13
24 6.3 According to temperature . 14
25 6.3.1 According to maximum operating temperature for application given in
26 Table 4 . 14
27 6.3.2 According to minimum operating temperature for application given in
28 Table 5 . 14
29 6.3.3 According to minimum temperature during installation as declared by
30 the manufacturer . 14
31 6.4 According to contribution to fire for non-metallic and composite cable ties
32 and integral assemblies only . 14
33 6.4.1 Flame propagating . 14
34 6.4.2 Non-flame propagating . 14
35 6.5 According to environmental influences . 15
36 6.5.1 According to resistance to ultraviolet light for non-metallic and
37 composite components . 15
38 6.5.2 According to resistance to corrosion for metallic and composite
39 components . 15
40 7 Marking and documentation . 15
41 8 Construction . 17
42 9 Mechanical properties. 18
43 9.1 Requirements . 18
44 9.2 Installation test . 18
45 9.3 Minimum installation temperature test for cable ties . 18
46 9.4 Minimum operating temperature test for cable ties . 19
47 9.5 Loop tensile strength test for cable ties classified according to 6.2.2 . 21
48 9.5.1 As-received condition . 21
49 9.5.2 After heat ageing . 21

oSIST prEN IEC 62275:2022
IEC CDV 62275 © IEC 2021 3 23A/994/CDV

50 9.5.3 After temperature cycling . 22
51 9.6 Loop tensile strength test for cable ties classified according to 6.2.3 . 22
52 9.6.1 As-received condition . 22
53 9.6.2 After-heat ageing . 22
54 9.6.3 After temperature cycling . 23
55 9.6.4 After vibration test for metallic cable ties . 23
56 9.7 Mechanical strength test for fixing devices and integral assemblies . 25
57 9.7.1 As-received condition . 25
58 9.7.2 After-heat ageing . 30
59 9.7.3 After temperature cycling . 31
60 10 Contribution to fire . 32
61 11 Environmental influences . 34
62 11.1 Resistance to ultraviolet light . 34
63 11.2 Resistance to corrosion . 37
64 12 Electromagnetic compatibility . 37
65 Annex A (normative) Compliance checks to be carried out for cable ties and fixing
66 devices currently complying with IEC 62275:2018 in order to comply with this
67 edition 4 . 38
68 Bibliography . 40
70 Figure 1 – Reference thickness for cable ties . 9
71 Figure 2 – Typical arrangements for cable tie orientation on split mandrel for tensile
72 test 12
73 Figure 3 – Test piston for durability test for marking . 16
74 Figure 4 – Test apparatus for cable tie impact test . 21
75 Figure 5 – Typical arrangement for the vibration test . 24
76 Figure 6 – Typical arrangement of test assembly for fixing devices and for integral
77 fixing devices . 30
78 Figure 7 – Arrangement for the needle flame test . 34
79 Figure 8 – Recommended sample repositioning for ultraviolet light and water exposure . 36
81 Table 1 – Stabilization time for samples . 9
82 Table 2 – Test mandrel diameter . 10
83 Table 3 – Loop tensile strength . 13
84 Table 4 – Maximum operating temperature for application . 14
85 Table 5 – Minimum operating temperature for application . 14
86 Table 6 – Literature information . 17
87 Table 7 – Energy values of hammer . 21
88 Table A.1 – Required compliance checks . 38
oSIST prEN IEC 62275:2022
IEC CDV 62275 © IEC 2021 4 23A/994/CDV

91 INTERNATIONAL ELECTROTECHNICAL COMMISSION
92 ____________
94 CABLE MANAGEMENT SYSTEMS –
95 CABLE TIES FOR ELECTRICAL INSTALLATIONS
97 FOREWORD
98 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
99 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
100 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
101 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
102 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC
103 Publication(s)"). Their preparation is entrusted to technical committees; any IEC National Committee interested
104 in the subject dealt with may participate in this preparatory work. International, governmental and non-
105 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
106 with the International Organization for Standardization (ISO) in accordance with conditions determined by
107 agreement between the two organizations.
108 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
109 consensus of opinion on the relevant subjects since each technical committee has representation from all
110 interested IEC National Committees.
111 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
112 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
113 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
114 misinterpretation by any end user.
115 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
116 transparently to the maximum extent possible in their national and regional publications. Any divergence
117 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
118 the latter.
119 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformit
...