EN IEC 62933-1:2024

SLOVENSKI STANDARD
01-september-2024
Električne naprave za shranjevanje energije (EES) - 1. del: Slovar (IEC 62933-
1:2024)
Electrical energy storage (EES) systems - Part 1: Vocabulary (IEC 62933-1:2024)
Elektrische Energiespeichersysteme (EES-Systeme) - Teil 1: Terminologie (IEC 62933-
1:2024)
Systèmes de stockage de l'énergie électrique (EES) - Partie 1: Vocabulaire (IEC 62933-
1:2024)
Ta slovenski standard je istoveten z: EN IEC 62933-1:2024
ICS:
01.040.27 Prenos energije in toplote Energy and heat transfer
(Slovarji) engineering (Vocabularies)
27.010 Prenos energije in toplote na Energy and heat transfer
splošno engineering in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62933-1

NORME EUROPÉENNE
EUROPÄISCHE NORM June 2024
ICS 01.040.17 Supersedes EN IEC 62933-1:2018
English Version
Electrical energy storage (EES) systems - Part 1: Vocabulary
(IEC 62933-1:2024)
Systèmes de stockage de l'énergie électrique (EES) - Partie Elektrische Energiespeichersysteme (EES-Systeme) - Teil
1 : Vocabulaire 1: Terminologie
(IEC 62933-1:2024) (IEC 62933-1:2024)
This European Standard was approved by CENELEC on 2024-06-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62933-1:2024 E

European foreword
The text of document 120/358/FDIS, future edition 2 of IEC 62933-1, prepared by IEC/TC 120
"Electrical Energy Storage (EES) systems" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 62933-1:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-03-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-06-19
document have to be withdrawn
This document supersedes EN IEC 62933-1:2018 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62933-1:2024 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60027 series NOTE Approved as EN 60027 series
IEC 61165:2006 NOTE Approved as EN 61165:2006 (not modified)
IEC 61427-2:2015 NOTE Approved as EN 61427-2:2015 (not modified)
IEC 61850-4:2011 NOTE Approved as EN 61850-4:2011 (not modified)
IEC 61850-4:2011/A1:2020 NOTE Approved as EN 61850-4:2011/A1:2020 (not modified)
IEC 61987-1:2006 NOTE Approved as EN 61987-1:2007 (not modified)
IEC 62381:2012 NOTE Approved as EN 62381:2012 (not modified)
IEC 62443-3-3:2013 NOTE Approved as EN IEC 62443-3-3:2019 (not modified)
IEC 62477-1:2012 NOTE Approved as EN 62477-1:2012 (not modified) +A11:2014
IEC 62668-1:2019 NOTE Approved as EN IEC 62668-1:2019 (not modified)
IEC 62680 series NOTE Approved as EN IEC 62680 series
IEC 62928:2017 NOTE Approved as EN IEC 62928:2018 (not modified)
IEC 62932-1:2020 NOTE Approved as EN IEC 62932-1:2020 (not modified)
IEC 62934:2021 NOTE Approved as EN IEC 62934:2021 (not modified)
ISO 14050:2020 NOTE Approved as EN ISO 14050:2020 (not modified)

IEC 62933-1 ®
Edition 2.0 2024-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Electrical energy storage (EES) systems –

Part 1: Vocabulary
Systèmes de stockage de l'énergie électrique (EES) –

Partie 1 : Vocabulaire
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 01.040.17  ISBN 978-2-8322-8797-2

– 2 – IEC 62933-1:2024 © IEC 2024
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions for EES systems classification . 6
3.1 Fundamental concepts for EES systems classification . 6
3.2 EES systems classification . 7
3.3 EES systems long-duration application . 9
3.4 EES systems short-duration application . 10
3.5 EES systems hybrid and emergency application . 12
4 Terms and definitions for EES systems specification . 12
4.1 Fundamental concepts for EES systems specification . 12
4.2 EES system duty cycles . 15
4.3 EES system primary POC . 17
4.4 EES system auxiliary POC . 24
4.5 EES system service life . 25
4.6 EES system energy efficiency . 27
4.7 EES system step response performances . 29
5 Terms and definitions for EES systems planning and installation . 32
5.1 Fundamental concepts for EES systems planning and installation . 32
5.2 EES system primary subsystem . 33
5.3 EES system auxiliary subsystem . 34
5.4 EES system control subsystem . 35
6 Terms and definitions for EES systems operation . 36
6.1 EES system operating state . 36
6.2 EES system operating signals . 37
6.3 EES system operating procedure . 40
6.4 EES system operating mode . 40
7 Terms and definitions for EES systems' environmental and safety issues . 41
7.1 EES system environmental issues . 41
7.2 EES system safety . 42
Annex A (informative) Index . 45
A.1 Terms index . 45
A.2 Abbreviated terms index . 45
Bibliography . 51

Figure 1 – Illustrative example of EES system energy storage capacities relation . 14
Figure 2 – Illustrative example of EES system charging-discharging cycle . 16
Figure 3 – Illustrative example of EES system power capability chart . 17
Figure 4 – Illustrative example of EES system response performances . 30
Figure 5 – EES system architecture with one POC type . 33
Figure 6 – EES system architecture with two POC types . 34
Figure 7 – Illustrative example of EES system available energies relation . 38

Table 1 – Illustrative example of EES system efficiency chart . 27

IEC 62933-1:2024 © IEC 2024 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
ELECTRICAL ENERGY STORAGE (EES) SYSTEMS –

Part 1: Vocabulary
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) patent(s), which
may be required to implement thi
...