EN 61360-2:2002

SLOVENSKI STANDARD
01-maj-2003
1DGRPHãþD
SIST EN 61360-2:2000
6WDQGDUGQLWLSLSRGDWNRYQLKHOHPHQWRYVSULSDGDMRþRNODVLILNDFLMVNRVKHPR]D
HOHNWULþQHNRPSRQHQWH±GHO6ORYDUVNDVKHPD(;35(66,(&
Standard data element types with associated classification scheme for electric
components -- Part 2: EXPRESS dictionary schema
Genormte Datenelementtypen mit Klassifikationsschema für elektrische Bauteile -- Teil
2: EXPRESS-Datenmodell
Types normalisés d'éléments de données avec plan de classification pour composants
électriques -- Partie 2: Schéma d'un dictionnaire EXPRESS
Ta slovenski standard je istoveten z: EN 61360-2:2002
ICS:
29.100.20 (OHNWULþQLLQHOHNWURPHKDQVNL Electrical and
VHVWDYQLGHOL electromechanical
components
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 61360-2
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2002
ICS 31.020 Supersedes EN 61360-2:1998
English version
Standard data element types with associated classification scheme
for electric components
Part 2: EXPRESS dictionary schema
(IEC 61360-2:2002)
Types normalisés d'éléments de données Genormte Datenelementtypen
avec plan de classification mit Klassifikationsschema
pour composants électriques für elektrische Bauteile
Partie 2: Schéma d'un dictionnaire Teil 2: EXPRESS-Datenmodell
EXPRESS (IEC 61360-2:2002)
(CEI 61360-2:2002)
This European Standard was approved by CENELEC on 2002-03-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2002 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61360-2:2002 E
Foreword
The text of document 3D/92/FDIS, future edition 2 of IEC 61360-2, prepared by SC 3D, Data sets for
libraries, of IEC TC 3, Documentation and graphical symbols, was submitted to the IEC-CENELEC
parallel vote and was approved by CENELEC as EN 61360-2 on 2002-03-01.
This European Standard supersedes EN 61360-2:1998.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-12-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2005-03-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annexes A and B are informative.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61360-2:2002 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 61360-2:2002
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of any
of these publications apply to this European Standard only when incorporated in it by amendment or
revision. For undated references the latest edition of the publication referred to applies (including
amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 61360-1 2002 Standard data element types with EN 61360-1 2002
associated classification scheme for
electric components
Part 1: Definitions - Principles and
methods
IEC 61360-4 1997 Part 4: IEC reference collection of EN 61360-4 1997
standard data element types, component
classes and terms
ISO 31 Series Quantities and units of space and time - -
ISO 639 1988 Code for the representation of names of--
languages
ISO 843 1997 Information and documentation - --
Conversion of Greek characters into Latin
characters
ISO 4217 1995 Codes for the representation of --
currencies and funds
ISO 6093 1985 Information processing - Representation--
of numerical values in character strings
for information interchange
ISO 8601 2000 Data elements and interchange formats ---
Information interchange - Representation
of dates and times
ISO 8859-1 1998 Information technology - 8-bit single-byte--
coded graphic character sets
Part 1: Latin alphabet No. 1
ISO 8879 1986 Information processing - Text and office EN 28879 1990
+ A1 1988 systems - Standard Generalized Markup
Language (SGML)
Publication Year Title EN/HD Year
ISO 9735 1988 Electronic data interchange for EN 29735 1990
administration, commerce and transport
(EDIFACT) - Application level syntax
rules
ISO 10303-11 1994 Industrial automation systems and ENV ISO 10303-11 1995
integration - Product data representation
and exchange
Part 11: Description methods: The
EXPRESS language reference manual
ISO 10303-21 1994 Part 21: Implementation methods: Clear ENV ISO 10303-21 1995
text encoding of the exchange structure
ISO 10303-41 2000 Part 41: Integrated generic resource:--
Fundamentals of product description and
support
ISO 10303-42 2000 Part 42: Integrated generic resource:--
Geometric and topological representation
ISO 12083 1994 Information and documentation - --
Electronic manuscript preparation and
markup
1)
ISO 13584-26 - Industrial automation systems and--
integration - Parts library
Part 26: Logical resource: Information
supplier identification
1)
ISO 13584-42 - Part 42: Description methodology:--
Methodology for structuring
...